• Advances in aircraft and spacecraft science
• /
• v.6 no.3
• /
• pp.225-238
• /
• 2019

A spike attached to a blunt nosed body significantly alters its flow field and influences the aerodynamic coefficients at hypersonic speed. The basic body is an axisymmetric, with a hemisphere nose followed by a cylindrical portion. Five different types of spikes, namely, conical aerospike, hemisphere aerospike, flat-face aerospike, hemisphere aerodisk and flat-face aerodisk are attached to the basic body in order to assess the aerodynamic characteristic. The spiked blunt body without the aerospike or aerodisk has been set to be a basic model. The coefficients of drag, lift and pitching moment were measured with and without blunt spike body for the length-to-diameter ratio (L/D) of 0.5, 1.0, 1.5 and 2.0, at Mach 6 and angle of attack up to 8 degrees using a strain gauge balance. The measured forces and moment data are employed to determine the relative performance of the aerodynamic with respect to the basic model. A maximum of 77 percent drag reduction was achieved with hemisphere aerospike of L/D = 2.0. The comparison of aerodynamic coefficients between the basic model and the spiked blunt body reveals that the aerodynamic drag and pitching moment coefficients decrease with increasing the L/D ratio and angle of attack but the lift coefficient has increasing characteristics.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.403-413
• /
• 2017

Dual-point aerodynamic design optimization is conducted for DLR-F6 wing-body-nacelle-pylon configuration adopting an efficient surface mesh movement method for complex junction geometries. A three-dimensional unstructured Euler solver and its discrete adjoint code are utilized for flow and sensitivity analysis, respectively. Considered design conditions are a low-lift condition and a cruise condition in a transonic regime. Design objective is to minimize drag and reduce shock strength at both flow conditions. Shape deformation is made by variation of the section shapes of inboard wing and pylon, nacelle vertical location and nacelle pitch angle. Hicks-Henne shape functions are employed for deformation of the section shapes of wing and pylon. By the design optimization, drag coefficients were remarkably reduced at both design conditions retaining specified lift coefficient and satisfying other constraints. Two-point design results show mixed features of the one-point design results at low-lift condition and cruise conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.345-352
• /
• 2011

In the present study, a three-dimensional CFD simulation on aerodynamic lift acting on windshield wiper blades was performed to improve the wiping performance of a vehicle moving at a high speed. To predict the reliable flow characteristics around the windshield wiper system, the computational domain included the full vehicle model with detailed geometry of wiper blades in the wind tunnel. From the numerical results, the drag and lift coefficients of wiper blade were obtained for the performance of windshield wiper. With this aerodynamic characteristics of windshield wiper, the effects of wiping angles and hood tip angle on the wiping performance of the windshield wiper were evaluated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.4
• /
• pp.308-315
• /
• 2007

This study is performed to find out the climb performance of light airplane, Chang Gong-91, as a part of flight test to acquire the certification. Chang Gong-91 is a 5-passenger light aircraft of normal category with single reciprocating engine, and the first officially certified by Korean Ministry of Construction and Transportation in 1993. These flight test procedure and data for climb performance are used to get type certification. We have got maximum climb rate for operating altitude, best angle of climb speed, best rate of climb speed, and absolute ceiling of Chang Gong-91 using drag polar data reduction method from sawtooth climb flight data. Also we compare the form drag coefficient from the results of climb performance and Oswald's effectiveness coefficient to design values using lift-drag curve of light airplane.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.3
• /
• pp.169-178
• /
• 2006

This research aims at establishing the fundamental characteristics of the kite through the analysis of the flow field around various types of kites. The approach of this study were adopted for the analysis; visualization by CFD(computational fluid dynamics). Also, the lift/drag and PIV(particle image velocimetry) tests of kites had been performed in our previous finding. For this situation, models of canvas kite were designed by solidworks(design program) for the CFD test using the same conditions as in the lift/drag tests. And we utilized FloWorks as a CFD analysis program. The results obtained from the above approach are summarized as follows: According to comparison of the measured and analyzed results from mechanical tests, PIV and CFD test, the results of all test were similar. The numerical results of lift-coefficient and drag-coefficient were 5-20% less than those of the tests when attack angle is $10^{\circ},\;20^{\circ}\;and\;30^{\circ}$. In particular, it showed the 20% discrepancy at $40^{\circ}$. The numerical results of the ratio of drag and lift were 8-13% less than those of the tests at $10^{\circ}$ and 10% less than those of the tests at $20^{\circ},\;30^{\circ}\;and\;40^{\circ}$. Pressure distribution gradually became stable at $10^{\circ}$. In particular, the rectangular and triangular types had the centre of the high pressure field towards the leading edge and the inverted triangular type had it towards the trailing edge. The increase of the attack angle resulted in the eddy in order of the rectangular, triangular and inverted triangular type. The magnitude of the eddy followed the same order. The effect of edge-eddy was biggest in the triangular type followed by the rectangular and then the inverted triangular type. The action point of dynamic pressure as a function of the attack angle was close to the rear area of the model with the small attack angle, and with large attack angle, the action point was close to the front part of the model.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.11a
• /
• pp.174-180
• /
• 1999

Aerodynamic characteristics of tandem airfoil under ground effect is investigated numerically. Some numerical results for NACA 6409 tandem airfoil are presented. The numerical results show that as being decreased distance between airfoils, the lift coefficient of leading airfoil is increased and that of trailing airfoil is decreased. Drag coefficient shows opposite property, At the same distance between leading airfoil and trailing airfoil, lower position of trailing airfoil give better tandem airfoil effect.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.835-840
• /
• 2008

We investigate the aerodynamic performance of the dragonfly wing which has the cross-sectional corrugation by using the static 2-dimensional unsteady simulation. Computational condition is at Re=150, 1400 and 10,000 with the angles of attack from 0 to 40 degrees. As computational results, the increment of the lift coefficient by corrugation is nearly constant over the critical angle of attack. Also, upper side corrugation of the wing have very little influence on increase of the lift coefficient.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.553-558
• /
• 2015

교량의 주탑, 초고층빌딩과 같이 세장비가 큰 대형구조물의 경우 풍하중에 취약한 특성을 지니고 있어서 바람에 의해 직각 방향으로 발산 진동하는 갤로핑(galloping) 현상이 발생하게 된다. 구조물의 진동을 억제하려는 방안으로 단면 형상에 변화를 주어 공기역학적 불안정성을 감소시키는 방법이 사용되고 있다. 본 논문에서는 Edison_CFD를 이용하여 모서리 절단부의 비율과 받음각에 따른 공기력 특성에 대한 전산해석을 수행하였다.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.580-584
• /
• 2015

수중 식생, 해양 구조물과 같은 복합 구조에 대하여 본 연구에서는 각각의 구조물을 원형 실린더로 가정하고, 구조물 다발 하나를 원형 실린더 패치로 가정하였다. 패치들의 배열을 계산할시 기존의 방법으로는 많은 격자가 필요하기 때문에 좀 더 효율적으로 외력의 특성을 파악할 방법을 살펴보았다. 계산 영역 내에서 평균화된 정보들을 통해서 이용하여 항력계수와 양력계수와 속도, 압력의 관계를 알아내는 모델링 방법을 해보았다.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.575-579
• /
• 2015

본 연구에서는 스파이럴 보강을 한 원형 실린더 주위의 유동를 분석하였다. 이를 위해 스파이럴 보강 부분을 사각형 부착물로 분리해서 나타내었다. EDISON_CFD의 가상 경계법을 이용하여 원형 실린더와 부착물 주위의 유동 현상을 해석하였다. 부착물의 두께와 각도를 다르게 하여 각각의 공력 계수와 총 합력을 구하고 이에 따른 특성을 분석하였다.