• 한국구조물진단유지관리공학회 논문집
• /
• 제17권4호
• /
• pp.101-111
• /
• 2013

본 연구에서는 울산~포항 간 복선전철 건설예정인 교량을 사례로 교량형식별 LCC 개념을 적용 경제성이 가장 우수한 공법을 적용하기 위하여 같은 연장 (L=1,615m)을 갖는 유사한 4개 교량에 대한 DEA (Data Envelopment Analysis) 분석을 실시하였다. DEA 모형은 상대적 효율성 평가를 위해 개발된 CCR 모형을 사용하였으며, 투입변수로 초기건설비용, 유지관리비용, 간접비용 (사용자비용 + 사회간접 손실비용), 생애주기비용을 사용, 산출변수로는 평균 내구연한을 사용하였다. 투입 변수 산정을 위해 생애주기비용 분석을 사용하였는데 생애주기 비용 산정은 분석기간 100년, 실질할인율 4.83%를 적용 하였으며, 비용의 분류는 초기건설비용, 유지관리비용, 사용자비용, 사회간접손실비용으로 분류 하였다. 분석결과, 비교 2안과 비교 3안이 가장 효율적인 것으로 분석되었으며, 나머지 대안의 효율성은 비교 1안, 기본안, 비교 4안 순서로 나타났다.

• 한국건축시공학회지
• /
• 제5권4호
• /
• pp.91-98
• /
• 2005

This paper illustrates a comparative analysis on the economic efficiency of remodeling method that is one of major factors in totting more desirable standards and proposes to utilize LCC calculation techniques in generating a required budget for more effective quantity-based analysis that is both objective and effect. Rather than comparing only the initial lost of two different methods, it seems through to compare their entire life cycle cost that includes any repair and reconstruction/ remodeling expenses, thus generate overall quantitative analysis in objective perspective

• 대한산업공학회지
• /
• 제21권1호
• /
• pp.17-32
• /
• 1995

The objective of this study is to develop a general design and performance evaluation model for the system designers in the initial design phase of the integrated automatic manufacturing system based on the RAM(Reliability, Availability and Maintainability) and life cycle cost(LCC). The methodology proposed in this research includes the following two stages. First, a deterministic approach to the solution of optimal work station arrangement for the initial system configuration is considered under the assumption that the system availability is one(no failure and maintenance), and then a stochastic simulation model based on RAM and LCC is developed. Using the results of these two stage simulation, a system performance index(SPI) was developed for the performance evaluation of the proposed system. Also a computer program is developed.

• 한국태양에너지학회 논문집
• /
• 제23권4호
• /
• pp.89-96
• /
• 2003

In planning a building retrofit, energy conservation, thermal comfort and economic benefits should be considered. In this study, retrofit effects of exterior insulating method on preventing condensation, saving energy were analyzed through the heat transfer simulation, energy simulation in the apartment house retrofitted by exterior insulating method cheaper than other retrofit methods. The results of this study show that the retrofit using exterior insulating method can prevent the condensation at the corner walls and save about 20% of annual heating load. The LCC analysis revealed to be effective to select a dryvit system for a building retrofit.

• 한국주거학회논문집
• /
• 제17권4호
• /
• pp.101-109
• /
• 2006

The purpose of this study was to suggest ways on reducing the cooling and heating energy cost of the officetel building with the multiple glazing windows according to Life Cycle Costing. This study consisted of an hour-by hour energy simulation program and further data from the EnergyPlus V1-2-2 to the four pane type windows that were applied with 2 low-e polyester film and krypton gas to the officetel model building. It was determined that the four panes type windows that had 2 low-e polyester film and krypton gas applied to, them showed a cooling and heating cost reduction over traditional double glazed windows that were filled with air. According to this study, as well as the information from chart 4.5 and the LCC it was determined that the present value of the four panes of windows that had 2 low-e polyester film and krypton gas applied to them showed. a 11.4% reduction in heating and cooling in comparison to the traditional double glazed windows that were filled with air.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.66-72
• /
• 2008

In this study, the ground source heat pump was installed at a research center in Jeju Island to verify the performance of the system and to give an information for a economic feasibility. The performance test was conducted until the heat storage tank temperature reached at $5^{\circ}C$ from $50^{\circ}C$ in the cooling operation, and until the storage temperature goes up to $50^{\circ}C$ from $10^{\circ}C$ in the heating mode. As results, the system performance shows that $2.2{\sim}3.5$ for the cooling operation and $2.5{\sim}3.5$ for heating operation. It is found that the underground is good heat source for the heat pump with $3{\sim}10^{\circ}C$ variation range. The ground source heat pump could be connected one of air conditioning system without any problem in system performance. Based on the economic analysis, the initial cost for the ground source heat pump will be compensated after 4 years operation. If the system runs 20 years, approximately 300 million Won will be saved when the air conditioning system adapt the ground source heat pump based on Life Cycle Cost analysis.

• 설비공학논문집
• /
• 제21권2호
• /
• pp.71-78
• /
• 2009

Up until recently, the energy and the economic analysis of a cogeneration system have been implemented by a manual calculation that is based on monthly thermal loads of buildings. In this study, a cogeneration system modeling validation with a detail building energy simulation, eQUEST, for a building energy and cost prediction has been implemented. By analyzing the hourly building electricity and thermal loads, it enables users to decide proper cogeneration system capacity and to estimate more accurate building energy consumption. eQUEST also verified the energy analysis when the heat pump system is integrated with the cogeneration system. The mechanical system configuration benefits from the high efficiency heat pump system while avoiding the building electricity demand increase. Economic analysis such as LCC (Life Cycle Cost) method is carried out to verify economical benefits of the system by applying actual utility rates of KEPCO(Korea Electricity Power COmpany) and KOGAS(KOrea GAS company).

• 한국도로학회논문집
• /
• 제9권4호
• /
• pp.159-169
• /
• 2007

본 연구에서는 효율적인 포장관리를 위해 경제성을 고려하여 생애주기비용(LCC)이 최소가 되는 시점에서 필요한 유지보수공법을 적용할 수 있는 포장관리시스템(PMS)을 개발하여 실제 포장관련 자료를 기반으로 한 유지관리방안을 제시하였다. 나아가 예산제약이 없는 경우를 대상으로 일정한 수준의 도로 서비스수준을 유지하기 위해 필요한 예산은 매년 차이가 있음도 확인하였다. Visual Basic 프로그램으로 개발하여 시스템의 응용성과 실효성의 검증을 위해 22개의 국도포장단면을 대상으로 현장조사를 시행하여 얻은 자료를 바탕으로 포장단면의 장기공용성 추정과 예산범위를 고려한 효율적인 유지관리 방안을 제시하였다.

• Membrane and Water Treatment
• /
• 제6권2호
• /
• pp.103-112
• /
• 2015

In India, recycling of treated effluent plays a major role in the industry. Particularly in copper industry, recycling techniques for treated effluents adopt conventional technologies which are not energy efficient and recovery of high quality process water, free flowing salts and sludge's is very low. This paper presents an overview of enhanced modern technology for treated effluents in copper industry making it more efficient with high recovery of high quality process water and free flowing salts. Life cycle cost (LCC) would be 15-20% lower than the conventional technologies. The conventional technology can be replaced with this proposed technique in the existing and upcoming copper industries.

• 한국산업정보학회논문지
• /
• 제20권5호
• /
• pp.107-115
• /
• 2015

Residential building owners are turning toward renovating their existing buildings to improve old and inefficient HVAC systems. Due to the renovation, much of the added costs will inevitably be passed on to tenants by increasing rent rates. This increment often increases the vacancy rate in the buildings. To balance the interests of both owners and tenants, this paper suggested a method to determine an appropriate rental rate increment for the HVAC system renovation. A case study on residential buildings was conducted to determine a balanced point where the rental rate increment that offsets the amount tenants are willing to pay for the renovation. To calculate all costs incurred by the renovation, life-cycle cost analysis was carried out. Therefore, this paper ultimately provides a threshold value of rental rate increment such that building owners can make a reasonable decision on the HVAC system renovation.