• Journal of Welding and Joining
• /
• 제26권3호
• /
• pp.67-73
• /
• 2008

Fatigue life evaluation of welded structures in a range of high cycles is one of the most difficult problems since extremely small plastic deformation and damage occur during the loading cycles. Moreover, it is very difficult to identify the strong non-linearities of welding, inducing residual stress. In this paper, numerical fatigue test method for welded structures was developed using continuum damage mechanics with inherent strain. Recently, continuum damage mechanics, which can simulate both crack initiation at the micro-scale level and crack propagation at the meso-scale level, has been adopted in the fracture related problem. In order to consider the residual stresses in the welded strictures, damage calculation in conjunction with welding, inducing inherent strain, was proposed. The numerical results obtained from the damage calculation were compared to experimental results.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.117-122
• /
• 2005

Titanium alloy has widely been used as material for glasses frame parts because it has high specific strength. It is also light and harmless to human body. However, we have little design data about the mechanical properties such as the creep behaviors of the alloy. Therefore, in this study, creep tests under four constant stress conditions have been conducted with four different temperature conditions. A series of creep tests had been performed to get the basic design data and life prediction of titanium products and we have gotten the following results. First, the stress exponents decrease as the test temperatures increased. Secondly, the creep activation energy gradually decrease as the stresses became bigger. Thirdly, the constant of Larson-Miller parameter on this alloy was estimated as about 2.5. Finally, the fractographs at the creep rupture showed the ductile fracture due to the intergranullar rupture and some dimples.

• 한국의류학회지
• /
• 제33권4호
• /
• pp.531-542
• /
• 2009

This study examines the correlation between the characteristics of sustainable slow design, The outcome derived from the pro-environmental consciousness in fashion design, and the trends of modern fashion design. The conclusion of this study is as follows. First, slow design for sustainability shows an environmental consciousness and stresses the ethical aspects of fashion design that take into account the wellbeing and sustainable development of human society. It also focuses on the continuos present in which the consistent pace of life endures, rather than pursuing speedy changes of fashion by titillating desire. Second, the five characteristics of slow design have been extracted from the analysis of the examples of fashion industry and other fashion-related areas. They are sustainability, recyclibility, handicraft, naturalness, and simplicity. Third, these characteristics of slow design have much to do with modern fashion genres. For instance, classical style fashions such as Chanel suit and Burberry coat have the same qualities of sustainability, while at the same time the Vintage fashion, which reinterprets the fashions from bygone eras in modern style, has the tendency of recyclibility, and the Hippie style, a resurrection of hand-touch spirit that emerged as a secondhand style expressionism resisting uniform mass production, has not only the quality of handicraft but also recyclibility.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.116-122
• /
• 2014

In this study, 2 kinds of twist run models as exercise equipments are compared by durability analyses of fatigue and vibration. Maximum equivalent stresses are shown as 3.3 MPa and 16.6 MPa at the parts of stress concentrations at models 1 and 2. As the values becomes much lower than yield stress of this models, these models are shown to be safe designs. Model 1 becomes stronger than model 2 at natural frequency analysis. Fatigue lives become lowest at four axis parts and one axis part respectively in cases of models 1 and 2. Maximum damage probability at fatigue is shown to be 2.4% near the average stress of 0 in case of model 1 but this probability becomes 0.6 % in case of model 2. Model 1 has the maximum damage possibility 4 times more than model 2 at these states. As the result of this study is applied by the design of twist run, the prevention on fatigue damage and the durability are predicted.

• 한국실내디자인학회논문집
• /
• 제21권4호
• /
• pp.40-47
• /
• 2012

Courtyard is evolving from the conventional one element of a building far beyond into independent peremeter of urban architecture, of which function has been darmatically upgraded from embedded traditional air fluiding, nutural lighting system into where full fledged function can be experienced so much as your imagimation reaches taking major social responsibility such as intact offline social networking which links people from neighbors, inter / extra buiding openness which allow people can communicate among othewise between themselves and artificial natural environmental emelents supplier where people resort to relaxation and natural healing. Roles of courtyard has been by far streatched out into nearby natural healing space where people can shake off their unavoidable stresses from the modern life relaxing themselves looking at the sky otherwise observe natural surroundigns such as plants, flowers and waters. Thanks to hereonto mentioned its merits, Courtyard building is widely used and seen as a center of modern urban design in residence, public bilding and urban planned buildings. Courtyard biulding is nowadays boasting their morphological diversity brought out from lots of topological variation, type variants, cross section and inter relationship with the other neighboring spaces. Hence, hereby I have been studied how above mentioned three major peremeters of courtyard has been upgraded in modern architecture comparing the period from 1960 to 1990 and the period starting from 1991.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2203-2205
• /
• 2003

KIRAMS-13, the first medical cyclotron developed by domestic technique, is used to produce radio-isotope such as $^{18}F$ whose life time is relatively short through test operation. For high-power operation of charged particle accelerators, the power coupler must withstand enormous stresses due to charging induced by high RF power passing through. High-power RF testing with peak power in excess of 30kW has been performed on prototype power coupler for KIRAMS-13 normal conducting cavities. CST MICROWAVE STUDIO(CST MWS) is used for fundamental RF Design, and power coupler is manufactured according to fundamental power coupler design requisite. The qualification of the couplers has occurred for the time being only in a limited set of conditions as the available RF system and control instrumentation are under improvement.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권6호
• /
• pp.3527-3534
• /
• 2013

Background: Cancer is a major health problem facing the entire world, and Jordan is no exception. However, patterns of cancer incidence and cancer burden in Jordan have never been explored thoroughly, and the aim of this study was to close this knowldege gap. Materials and Methods: The study was based on data obtained from the Jordan cancer registry from 1996 to 2009. All cancer cases that were diagnosed during the study period were registered and included in this study. Results: A total of 51,626 cases were registered in Jordan during the 14- year period. The incidence rate showed no significant increase in males (percent change PC 6.8%), while in females a marked increase was observed (PC 14.8%). The major cancer sites for males were bronchus and lung, colorectal, bladder, leukemia and prostate. In females, the leading cancer sites were breast, colorectal, leukemia, thyroid and NHL. Conclusions: Compared to other countries in the region, Jordan has comparable rates. On the other hand the rates of cancer are markedly lower in Jordan compared to more industrialized countries such as the US and Europe. There was an overall increase in the incidence of cancer in Jordan, especially among females, which stresses the need for programs to raise awareness on the importance of early diagnosis and preventive life style measures.

• 산업기술연구
• /
• 제25권B호
• /
• pp.73-80
• /
• 2005

Durability of concrete structures is seriously compromised by cracking at early-age concretes, particularly in high-strength or high-performance concrete structures. Since early-age cracking is influenced by various factors that affect the hydration process, early-age shrinkage and stress/strain development, the behavior at early-age is highly complex and no rational methodologies for its control have yet been established. Concrete structures often present volumetrical changes particularly due to thermal and moisture related shrinkages. Volumetric instability is detrimental to the performance and durability of concrete structures because structural elements are usually restrained. These restrained shrinkages develope tensile stresses which often results in cracking in combination with the low fracture resistance of concrete. Early-age defects in high-performance concrete due to thermal and autogenous deformation shorten the life cycle of concrete structures. Thus, it is necessary to examine the behavior of early-age concrete at the stages of design and construction. The purpose of this study was to propose a shrinkage models of VES-LMC (very-early strength latex-modified concrete) at early-age considering thermal deformation and autogenous shrinkage.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.595-602
• /
• 1998

Specimens of 304 stainless steel were tested to failure at elevated temperatures under multiaxial stress states, uniaxial tension using smooth bar specimens, biaxial shearing using double shear bar specimens, and triaxial tension using notched bar specimens. Rupture times are compared for uniaxial, biaxial, and triaxial stress states with respect to the maximum principal stress, the von Mises effective stress, and the principal facet stress. The results indicate that the principal facet stress gives the best correlation for the material investigated, and this parameter can predict creep life data under multiaxial stress states with rupture data obtained with specimens under uniaxial stresses. The results also suggest that grain boundary cavitation, coupled with localized deformation processes such as grain boudary sliding, controls the lifetimes of the specimens.

• 수산해양기술연구
• /
• 제26권2호
• /
• pp.204-212
• /
• 1990

The SMC composite, now being considered in certain structural applications, is anticipated to experience repeated loading during service. Thus, understanding of the fatigue behavior is essential in proper use of the composite material. In this paper, using the SMC composite composed of E-glass chopped strand and unsaturated polyester resin three point bending fatigue tests are carried out to investigate the fatigue crack propagating behavior under various cyclic stresses and fatigue damage of various microcrack forms. The following results are obtained from this study; 1) Most of the total fatigue life of the SMC composite is consumed at the initial extension or the growth of the macroscopic crack. 2) A Paris' type power-law relationship between the crack propagation rate and stress intensity factor range is obtained, and the value of material constant m is much higher (m=9~11)than that of other metals. 3) In case of high cyclic stress the fatigue damage show high microcrack density and short crack length, but in case of low cyclic stress does it vice versa. 4) Fatigue damage is characterized by microcrack density, crack length and distribution of crack orientation.