• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.101-107
• /
• 1997

A sectional analysis of auto-body panel stamping is carried out by using the rigid-plastic FEM based on the membrane theory. The auto-body panel material is assumed to possess normal anisotropy and to obey Hill's new yield criterion and its associated flow rule. A method of contact treatment is proposed in which the skew boundary condition for arbitarily shaped tools is successively used during iteration. Deformation of each section of trunk-lid panel is simulated and composed to get the three-dimensional shape by using CAD technique. It was shown that the composition of the two-dimensional section analysis gives almost the same results as the full three-dimensional analysis.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.84-87
• /
• 2011

This paper describes the application of the three sustainable design elements for a residential project in the county of Los Angeles, USA. The first design element is the green building design in which a base model will be created using the Autodesk REVIT MEP program for the analysis by Building Information Modeling (BIM) for the energy analysis modeling process to determine the energy savings for each of the recommended design features. The second element is the Low Impact Development design for the site design using specialty material and structural devices for infiltration and recycling of storm water for reuse. The third element is the application of drought tolerant plant species in the site's landscaping design as a means to conserve water. The construction cost associated with the application of these three elements will be reviewed to determine the practicality and effectiveness of this sustainable design approach.

• 한국식생활문화학회지
• /
• 제7권2호
• /
• pp.119-125
• /
• 1992

To analyze food material and table wares in daily reception dishes of Choson Dynasty, studied historic book 'Young jeob Dogam Zabmulsek Euigwae' (1609, 1643 year) described the daily reception dishes for Chinese envoy in Choson Dynasty. The results obtained from this study are as follows. 1. Food material for reception Chinese envoy were vegetable, pickled vegetable, soup (?水), brown seaweed, kelp, green seaweed, garlic, pine mushroom, mushroom, driedfish, fish egg, shrimp, pork, pheasant, fowl, salted fish shrimp and etc, various fruits preserved in honey, green peajelly, buck wheat jelly and bean curd. 2. The table wares were rice bowl(鉢里), small bowl of porcelain(甫兒), water bowl(大貼), plate(貼是), small dish(鍾子), small earthen ware jar(東海), jar(缸), pottery(甕), table(盤), chopsticks(?), washbowl(洗面盆), earthen ware steamer(甑), kettle(釜), brazier(爐), measuring cup(升), unit of measure(合), meter(稱子), spoon(匙), chest (函), lid(蓋), large rice bowl(所羅) and bowl(椀).

• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.16-22
• /
• 2023

In a solar cell, degradation refers to the decrease in performance parameters caused by defects originated due to various causes. During the fabrication process of solar cells, degradation is generally related to the processes such as passivation or firing. There exist sources of many types of degradation; however, the exact cause of Light and elevated Temperature Induced Degradation (LeTID) is yet to be determined. It is reported that the degradation and the regeneration occur due to the recombination of hydrogen and an arbitrary substance. In this paper, we report the deposition of Al₂O₃ and SiN_X on silicon wafers used in the Passivated Emitter and Rear Contact (PERC) solar structure and its degradation pattern. A higher degradation rate was observed in the sample with single layer of Al₂O₃ only, which indicates that the degradation is affected by the presence or the absence of a passivation thin film. In order to alleviate the degradation, optimization of different steps should be carried out in consideration of degradation in the solar cell fabrication process.

• 방사성폐기물학회지
• /
• 제5권3호
• /
• pp.199-212
• /
• 2007

IP-2형 운반용기는 정상운반조건에서의 자유낙하시험 및 적층시험을 수행한 후에 운반내용물의 분산 및 유실이 없어야 하며 외부표면에서의 방사선량률이 20%이상 증가할 수 있는 차폐능력의 상실이 없어야 한다. 본 연구에서는 두꺼운 철판을 구조재로 사용하며 볼트체결방식의 뚜껑을 가진 IP-2형 운반용기에 대한 구조 안전성을 평가하기 위한 해석적인 방안을 제안하였다. 해석적인 방법을 통하여 원자력발전소에서 발생된 방사성폐기물 드럼을 폐기물 처리시설에서 임시저장고까지 운반하기 위한 두 종류의 IP-2형 방사성폐기물 운반용기에 대하여 자유낙하조건에서 운반내용물의 분산 및 유실과 차폐손실이 없음을 확인하였다. 자유낙하조건에서 운반내용물의 분산 및 유실을 평가하기 위하여 최대 볼트단면 평균응력값과 최대 뚜껑열림량을 볼트의 인장강도와 뚜껑부에 존재하는 단차와 비교 평가하였다. 또한 최대 차폐두께 감소량을 이용하여 차폐손실을 평가하였다. 자유낙하조건에 대한 동적충돌해석을 검증하고 구조 안전성을 시험적으로 평가하기 위하여 자유낙하시험을 다양한 방향으로 실시하였다. 자유낙하시험에서는 운반내용물의 분산 및 유실은 볼트체결방식의 뚜껑에서 볼트의 파손 및 플랜지의 변형 등을 검사하여 평가하였으며, 차폐손실은 초음파 두께 측정기를 이용한 차폐두께를 측정하여 평가하였다. 해석에 대한 검증을 위하여 시험에서 취득한 변형률과 가속도를 동일한 위치에서 얻어진 해석결과와 비교하였다. 해석결과는 시험결과에 비하여 보수적인 결과를 보여주므로 해석에서 입증한 IP-2형 방사성폐기물 운반용기의 안전성은 보수적인 결과이다. 마지막으로 유한요소해석을 통하여 적층조건에 대한 IP-2형 방사성폐기물 운반용기는 안전함을 입증하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.84-84
• /
• 2003

The ZnSe epilayers were grown on the GaAs substrate by hot wall epitaxy. After the ZnSe epilayers treated in the vacuum-, Zn-, and Se-atmosphere, respectively, the defects of the epilayer were investigated by means of the low-temperature photoluminescence measurement. The dominant peaks at 2.7988 eV and 2.7937 eV obtained from the PL spectrum of the as-grown ZnSe epilayer were found to be consistent with the upper and the lower polariton peak of the exciton, I$_2$ (D$^{\circ}$, X), bounded to the neutral donor associated with the Se-vacancy. This donor-impurity binding energy was calculated to be 25.3meV The exciton peak, lid, at 2.7812 eV was confirmed to be bound to the neutral acceptor corresponded with the Zn-vacancy. The I$_1$$\^$d/ peak was dominantly observed in the ZnSe/GaAs:Se epilayer treated in the Se-atmosphere. This Se-atmosphere treatment may convert the ZnSe/GaAs:Se epilayer into the p-type. The SA peak was found to be related to a complex donor like a (V$\sub$se/ - V$\sub$zn/) - V$\sub$zn-/

• 한국항공운항학회지
• /
• 제26권2호
• /
• pp.68-75
• /
• 2018

A flare from an Air Force fighter was abnormally dispensed during the landing. To determine the cause of the abnormal dispensing, fracture analysis, signal analysis and reproduction experiments based on physics of failures were performed. The primary cause of the failure was analyzed to be due to an intermittent fault of an internal circuit card in the AN/ALE-40 chaff/flare dispenser by a broken lid of a capacitor, and the root cause which had derived the primary cause was considered to be an improper handling during the domestic maintenance which were changed from the overseas maintenance due to the DMSMS problem. Therefore, the overall process of the maintenance capability development system was reviewed and alternative ways that considers maintenance error decision aid(MEDA) for system improvement were suggested to prevent further failures.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.57-62
• /
• 2003

A fundamental structural design consideration for a vehicle system is the overall vibration characteristics in bending and torsion. Vibration characteristics of such vehicle system are mainly influenced by the static and dynamic stiffness of the vehicle body structure and also by the material and physical properties of the components attached to the vehicle body structure. In this paper, modeling techniques for the vehicle components are presented and the flexibility and mass effects of the components for the vibration characteristics of the vehicle are investigated. The $1^{st}$ torsional frequency is increased by attaching windshields to the B.I.W. (body-in-white), but the $1^{st}$ bending frequency is decreased by the mass effect. And also, the natural frequencies of the vehicle are large decreased by attaching bumpers, seats, doors, trunk-lid etc. But, suspension system rarely affects the natural frequencies of the vehicle. The study shows thai the dynamic characteristics of the vehicle system can be effectively predicted in the initial design stage.

• 한국식생활문화학회지
• /
• 제18권6호
• /
• pp.491-505
• /
• 2003

Yeolgujatang is traditional casserole with meat, fish and vegetables in special pot. Name of Yeolgujatang was in 1800s, as yeolgujatang, yeolgujatangbang, yeolguja, in 1900s, Yeolgujatang, royal feast food in Yi Dynasty was yeolgujatang, Meon-sinseolro, tangsinseolro. Yeolgujatang frame has legs and a lid, and a cylinder that can contain charcoal at the center of its rounded pot. with this charcoal, food can be cooked. Its material has changed from brazier to brassware, stainless steel, and silver. Nowdays electric sinseolro was also launched, which uses electric power instead of charcoal. Materials in yeolgujatang are beef, intestines, pork, chicken, pheasant, fish, sea bream, abalone, shrimps, vegetables, mushroom, ddock, guksu, cooked rice, seasening and garnish. Nutrition of Yeolgujatang per capita contains 221.5kal of calory, 17.3g of protein, 16.5g of fat, 6.1g of carbobydrates, 2g of fiber, 57.6mg of calcium, 208mg of phosphorus, 4.3mg of ferrum, $2177{\mu}gRE$ of vitaminA, 1.58mg of vitamin $B_1$, 0.3mg vitamin $B_2$, 6.6mg of vitaminC and 5.26mgNE of niacin. Yeolgujatang is excellent in nutrition, except for calcium and vitaminC.

• 자원리싸이클링
• /
• 제19권1호
• /
• pp.13-20
• /
• 2010

콘크리트 제조시 많은 에너지가 소모되며 특히 결합재인 시멘트는 제조과정에서 다량의 $CO_2$를 배출하기 때문에 이러한 부정적인 인식을 해소하기 위한 노력이 진행되고 있으며, 최근 들어 환경 친화적인 에코 콘크리트의 제조 및 적용에 대한 관심이 높아가고 있다. 에코 콘크리트는 환경부하의 저감, 산업폐기물의 활용 및 환경관련 성능의 향상 등 다양한 접근 방법이 있으며 이러한 방법들이 국내에 정착하기 위해서는 지속가능한 개발로 친환경 성능이 개선된 콘크리트의 제조에 관한 연구가 필요한 실정이다. 본 연구에서는 콘크리트용 시멘트 및 골재를 천연재료인 메타카올린 및 산업부산물인 동슬래그로 대체 활용한 환경 부하 저감 목적의 에코형 혼합콘크리트를 제작한 후 각 종 시험결과를 통하여 그 활용 가능성을 고찰하였다.