• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.265-267
• /
• 2009

we proposed a grid connected peak load compensation system with high discharge current characteristics based on lithium polymer battery for development of the next generation power-station. The lithium polymer battery has faster discharge current characteristics than conventional battery, so that can compensate high active power demanded by load in a short time using the low capacity battery bank. Therefore, it is possible to control power leveling of grid by measuring storage energy of battery and active power which is needed from load. The validity of proposed system was verified through the simulation and experiment.

• Korean Institute of Interior Design Journal
• /
• v.13 no.4
• /
• pp.83-91
• /
• 2004

This study focuses on defining the new meaning of immateriality in the present times expressed on space. The purposes of this study were to examine the characteristics of immateriality showed in commercial interior design in Korea, based on the definition of immateriality concept and the analysis of the way it is expressed. The result of this study is as follows; it categorized characteristic of material expression, space concept and media. Characteristic elements can be classified into 6: transparency, implication, off-gravitation, ambiguity of boundary, temporality, interactivity. Expression of immateriality in commercial interior space was obtained in many different ways, which are identified: new expression of material by reduction of materiality, leveling of transparency, expression of floating status, changeable image, illusion effect, blurring boundary. Immateriality is deeply associated with the elements such as surface, material, media, light, and movement. So it is being recognized as an important design concept in today's pluralist society and will play an important role within the design paradigms for the future.

• Textile Coloration and Finishing
• /
• v.5 no.2
• /
• pp.134-138
• /
• 1993

Wool, silk and nylon 6 fabrics were treated with low-temperature plasma under atmospheric pressure of acetone/argon or helium/argon for 30 and 180 sec, and then dyed with leveling type acid dye, C.I. Acid Red 18 and milling type acid dye, C.I. Acid Blue 83. In spite of short time of the plasma treatment for thirty seconds, the color depth of wool fabrics was increased remarkably with both of the plasma gases, aceton/argon or helium/argon and with the kinds of dyes i.e., levelin type or milling type. But the atmosperic low-temperature plasmas did not increase the depth of silk and nylon 6 fabrics dyed with both of the acid dyes regardless of the teated time and plasma gases. It seems that low-temperature plasma by atmospheric-pressure discharge is effective for improvement of dyeing of wools as is the same way with the low-temperature plasma by glow discharge. The kinds of plasma gases and treated time did not influnce the depth of wool fabric pretreted with the atmosperic low-temperature plasmas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.1
• /
• pp.9-15
• /
• 2018

Precise regional geoid heights on and around Mount Jiri were calculated and were compared to the KNGeoid14 (Korean National Geoid 2014) model. In this study, gravimetric geoid heights were calculated by using RCR (Remove-Compute-Restore) technique and then hybrid geoid heights were calculated by using the LSC (Least Square Collocation) method in the same area. In addition, gravity observation and GNSS(Global Navigation Satellite System) surveying performed in this study were utilized to determine gravimetric geoid heights and to compute hybrid geoid heights, respectively. The results of the study show that the post-fit error (mean and standard deviation) of hybrid geoid heights was evaluated as $0.057{\pm}0.020m$, while the mean and standard deviation of the differences were -0.078 and 0.085 m, respectively for KNGeoid14. Therefore, hybrid geoid heights in this study show more considerable progress than KNGeoid14.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.30-37
• /
• 2008

The ARS(Attitude Reference System) calculates an attitude of a vehicle using inertial angular rate sensors and acceleration sensors. The attitude error of ARS increases due to the integration of angular rate sensor output. To reduce the attitude error an acceleration of sensor is used similar to leveling method of INS(Inertial Navigation System). When an acceleration of vehicle is increased, it is difficult to calculate the attitude error using acceleration sensor output. In this paper the estimation method of acceleration due to the attitude error only is proposed. Two methods of the attitude calculation depending on vehicle dynamics and the integration method of these two methods are proposed. To verify its performance the monte carlo simulation is performed and shows that it bounds attitude error of ARS to reasonable level.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.13-16
• /
• 1988

As the automic power plant is increased, load leveling energy storage system becomes more important. Pumped hydroelectric storage, used in the present, has too storage efficiency and difficulty in selecting site. But SMES(Superconducting Magnet Energy Storage) has high storage efficiency (90%), fast time response characteristics and ease of location. The general object of SMES with electric power system is the minimization overall production cost. This paper presents a method for the economic operation of SMES by Dynamic Programming.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.786-788
• /
• 2005

전력 부하관리기기인 축냉시스템은 그동안 건물 냉방 공조용을 중심으로 보급되었다. 기저부하를 증진시키고 주간의 피크부하를 낮추어 주야간의 부하불균형을 해소하는 축냉시스템은 그동안 전력부하율 향상 및 부하평준화에 많이 기여해왔다. 산업용으로의 축냉기기보급의 타당성 및 부하평준화에 관한 연구시행 결과, 그 타당성과 보급확대의 필요성이 확인 되었다. 가스식 냉방기는 피크억제측면에서, 축냉식은 부하이전 측면에서 장점이 매우 크며, 전체 부하관리 측면에서 이들의 균형보급발전 노력이 필요하다. 산업용으로의 축냉기기 보급은 특히 주야간 부하불균형이 심한 하계의 부하평준화효과가 크며, 그 보급시장 및 전력절감 잠재량 규모를 감안할 때 국가적 편익과 추가 발전설비건설억제에 크게 기여할 것으로 예상된다.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.736-739
• /
• 2006

While hyperspectral data are very rich in information, their processing poses several challenges such as computational requirements, noise removal and relevant information extraction. In this paper, the application of advanced scale-space filtering to selected hyperspectral bands was investigated. In particular, a pre-processing tool, consisting of anisotropic diffusion and morphological leveling filtering, has been developed, aiming to an edge-preserving smoothing and simplification of hyperspectral data, procedures which are of fundamental importance during feature extraction and object detection. Two scale space parameters define the extent of image smoothing (anisotropic diffusion iterations) and image simplification (scale of morphological levelings). Experimental results demonstrated the effectiveness of the developed scale space filtering for the enhancement and smoothing of hyperspectral remote sensing data and their advantage against watershed over-segmentation problems and edge detection.

• The Korean Journal of Zoology
• /
• v.18 no.1
• /
• pp.41-49
• /
• 1975

Dose response and time dependence of DNA repair synthesis were investigated to determine the possible relationship between DNA repair synthesis and chromosome exchanges in $\\gamma$-ray irradiated BHK-21 and KB cell lines. DNA repair synthesis induced by $\\gamma$-ray was dose dependent up to 5kR, then leveling off occurred until 50 kR was reached. Time dependence of DNA repair synthesis was continued for up to 1$\\sim$2 hours after irradiation although the initial dose responses were cell line specific. Chromosome exchanges induced by $\\gamma$-ray showed different radiosensitivities in these cell lines and did not show a correlation with the DNA repair synthesis.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.203-204
• /
• 2008

EGM96 지구중력장모델을 개선시킨 EGM2008 지구중력장모델이 미국 NGA에 의해 발표됨에 따라, 본 연구에서는 EGM2008지구중력장모델을 한반도 지역을 대상으로 최대차수 360으로 해석하여 기존의 지구중력장모델인 EGM96(360차수) 및 EIGEN-GL04C(360차수)와 비교하였다. 또한 EGM2008은 기존의 구면조화분석한계인 360차수를 뛰어넘고 있으므로 격자 간격 $30'{\times}30'$ 및 $15'{\times}15'$, 그리고 $10'{\times}10'$로 각각 해석하여 지오이드고를 계산하고 정확도를 평가하였다. 정확도 평가는 우리나라의 수준점에서 GPS측량을 실시한 464점의 GPS/leveling 데이터를 활용하였다. 평가결과 EGM2008(360차수)은 $-0.100{\pm}0.183m$를 나타내 EGM96(360차수)결과인 $0.156{\pm}0.238m$에 비해 상당한 정확도의 개선을 가져왔으며, 2190차수의 고차항으로 해석한 결과 $-0.069{\pm}0.140m$ 더욱 정확한 결과를 얻을 수 있음을 확인하였다.