• Journal of Wetlands Research
• /
• v.18 no.3
• /
• pp.262-266
• /
• 2016

We investigated the characteristic demographics for visitors to Mujechi bog on Mt. Jungjok, with the purpose of developing a management strategy for the conservation and wise use of the montane wetland. Using daily visitor data from 2007, 2011, and 2015 we extracted and analyzed; visitation date, age, residential areas, purpose of visitation and the time allotted for the visit. The largest age cohort was the decade of the fifties(36.8%/total number of visitors) and followed by the decade of the forties(30.4%). The majority of visitors were from Ulsan(67%), Busan(16.6%), and Yangsan(10.8%). The visitors' primary objectives were to hike Mt. Jungjok(39-64.4%) or view Mujechi bog(18.7-51.8%) during the weekend. People visited more during the weekend than weekdays(F=6.19, p<0.002). In addition, there was a clear seasonality obvious in the monthly visits. The proportion of visitors were present in spring and fall, the month with the highest visitation rate was May at $15.6{\pm}2.8%$($mean{\pm}S.D.$). This increase in May was partly due to the desire to see the Korean azalea in bloom in the spring. Montane bog, like Mujechi, could be highly affected by disturbance(e.g. stamping, sediment inflow) caused by visitors. Therefore, it is suggested, based on the level of visitation that to reduce possible human disturbance effects, that either a seasonal restriction or a yearly alternation of trails be established. Visitors to the wetland should be restricted access to certain areas of the wetland, or be required to go in the accompaniment of a ranger or warden.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.357-368
• /
• 1996

To utilize the ascidian tunic as a natural pigment and dietary sources for rainbow trout (Oncorhynchus mykiss), juvenile were fed on experimental diets containing enzymatic hydrolysates of ascidian tunic treated with three commercial mined enzymes (ultrazyme, cellulase, viscozyme) for 12 weeks. From the results of feeding experiment, similar growth rate was checked in the enzymatic hydrolysis group compared with control, and those were a higher than of ascidian tunic powder group. The total acetone extractable pigment in muscle of the enzymatic hydrolysates group was lower than that of the ascidian extracts group and carophyll pink group until 8 weeks, but the level of those pigment of the enzymatic hydrolysates was similar to the ascidian extracts and carophyll pink group after 12 weeks. The lipid content was increased with the pigment concentration in the all experimental group. But the ascidian tunic pigment did not influence on the composition of the fatty acids in the muscle and liver. From the consideration of results for pigmentation, the enzymatic hydrolysates of ascidian tunic were suitable for both a natural pigment and dietary protein and carbohydrates sources as a substitute synthetic pigment for aquaculture use.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.1
• /
• pp.1-28
• /
• 2008

In this research, an empirical analysis was performed to determine the correlation between management performance and Empirical Research on the R&D investment for domestic venture businesses in each industry. Specifically, an empirical analysis for each industry was attempted not only to clarify the general hypothesis on the relationship between management performance and R&D investment for venture businesses but also to demonstrate that differences exist for each industry. Empirical analysis was conducted for eight industries with respect to the $2002{\sim}2006$ panel data extracted as investigative results from the "Investigation Report on Science and Technology R&D Activities" published by the Ministry of Science and Technology. Industrial classification was limited to the middle-level classification (2-digit) in the Korea Standard Industry Code (KSIC) owing to the limited number of panels. Although this research only verified the overall positive effect of R&D activities and funds for existing research on corporate value or productivity and management performance, it was able to document the difference for each individual industry and each business size unlike existing research. Furthermore, the reliability of the research results was enhanced by targeting companies that have been continuously conducting R&D and management activities using consistent 5-year panel data in the analysis. Again, this was something that existing research did not have. Finally, through the use of recent data from 2002 after the IMF economic crisis up to 2006 in the empirical analysis, this research proposed the problems due to the prevailing circumstances at the time of entering the advanced nation stage based on an empirical analysis; the prevailing problems during the pursuit of advanced nation status before the IMF crisis broke out were not tackled. The key empirical analysis yielded several results. First, capital and size of the labor force have a positive correlation with the management performance for the entire company or the venture business. This applies to all eight industries as the subjects of the analysis. Second, although the number of years since a company has been established can have positive or negative correlation with management performance for the entire company or venture business in specific industries, a definite overall trend cannot be identified. Third, R&D investment can be said to have an overall positive effect on corporate management performance. Fourth, the size of the research staff cannot be said to be a factor unilaterally affecting the management performance of the entire company or the venture business. Fifth, the number of years a research institute has been in operation, which was assumed to have a positive effect on the management performance of a company because of the accumulated R&D know-how -- definitely acts as a positive factor contributing to the management performance of a company.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.393-399
• /
• 2012

In this study, the antioxidant and anti-wrinkling effects of extracts from Aruncus diocius var. kamtschaticus (ADV) were investigated. According to the results, the ethanol extract has better antioxidant and anti-wrinkling effects than the water extract. The amounts of total polyphenol and flavonoid compounds in the ethanol extract were 122 and 36 mg/g, respectively, while those in the water extract were 87 and 26 mg/g. The antioxidant activities of the ethanol and water extracts were 395 and 4,682 ${\mu}g/mL$ as the $RC_{50}$ values for the DPPH radical scavenging activity, and 227 and 366 ${\mu}g/mL$ for the $ABTS^+$ radical scavenging activity, respectively. The reducing power of the ethanol extract (1.58 at 2 mg/mL) was higher than that of the water extract (0.88 at 2 mg/mL). The astringent activities of the ethanol and water extracts were 91.27 and 16.35% at 10 mg/mL, respectively. Furthermore, the ADV ethanol extract treatment of the fibroblast cell after UV irradiation resulted in increased cell viability (10% at 100 ${\mu}g/mL$) and collagen biosynthesis (33% at 100 ${\mu}g/mL$), with a lowering in the MMP-1 expression level (16.8 % at 100 ${\mu}g/mL$). These results demonstrate that AVD provides a remarkable and significant tensor and anti-wrinkling effect on the skin, which could be of a great use in anti-aging skin care products.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.325-335
• /
• 2008

The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

• Journal of Korea Game Society
• /
• v.4 no.3
• /
• pp.11-20
• /
• 2004

Virtual reality that we have seen from the movies in 80's and 90's is hawing near based on the rapid progress of science together with a computer technology. Various virtual reality system developments (such as VRML, HMD FishTank, Wall Type, CAVE Type, and so on) and the advancement of those systems make for the embodiment of virtual reality that gives more sense of the real. Virtual reality is so immersive that makes people feel like they are in that environment and enable them to manipulate without experiencing the environment at first hand that is hard to experience in reality. Virtual reality can be applied to the spheres, such as education, high-level programming, remote control, surface exploration of the remote satellite, analysis of exploration data, scientific visualization, and so on. For some connote examples, there are training of a tank and an aeroplane operation, fumiture layout design, surgical operation practice, game, and so on. In these virtual reality systems, the actual operation of the human participant and virtual workspace are connected each other to the hardware that stimulates the five senses adequately to lend the sense of the immersion. There are still long way to go, however, before long it will be possible to have the same feeling in the virtual reality as human being can have by further study and effort. In this thesis, the basic definition, the general idea, and the kind of virtual reality were discussed. Especially, CAVE typed in reality that is highly immersive was analyzed in definition, and then the method of VR programming and modeling in the virtual reality system were suggested by showing the restoration process of Kyongbok Palace (as the content of the original form of the culture) that was made by KISTI(Korea Institute of Science and Technology Information) in 2003 through design process in virtual reality system. Through these processes, utilization of the immersive virtual reality system was discussed and how to take advantage of this CAVE typed virtual reality system at the moment was studied. In closing the problems that had been exposed in the process of the restoration of the cultural property were described and the utilization plan of the virtual reality system was suggested.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.581-589
• /
• 2021

With the recent increase in the introduction of micro-electric vehicles in Korea, interest in micro-electric vehicle user satisfaction is increasing to revitalize related markets. In this paper, a basic study was conducted on the development of public services using micro-electric vehicle based on the constituent factors of user satisfaction. The survey includes: ① 'Analytic Hierarchy Process (AHP) for selecting the priority factors of user satisfaction of micro-electric vehicles', ② 'A survey of micro-electric vehicles image' to collect data in advance for providing users' preferences and transportation services for micro-electric vehicles, ③ In order to investigate the user satisfaction level of users who actually operated micro-electric vehicles, the order of 'user satisfaction survey of micro-electric vehicle drivers' was conducted. In the Analytic Hierarchy Process (AHP) analysis, it was found that users regarded as important in the order of 'user utilization data', 'vehicle movement data', and 'charging service data'. In the micro-electric vehicle image survey, users perceived micro-electric vehicles more positively in terms of "safety", 'durability', 'Ride comfort', 'design', 'MOOE (Maintenance and other operating expense)', and 'environment-friendly' when comparing micro-electric vehicles with electric motorcycles. In the survey on the user satisfaction of micro-electric vehicle drivers, the use of micro-electric vehicle did not directly affect work performance efficiency, and there was an experience of being disadvantaged on the road due to the size of the micro-electric vehicle, and driving in a cluster of micro-electric vehicle for outdoor advertisements. The city's public relations effect was great, but it was concerned about safety. In the future, based on the results of this study, we plan to build a user satisfaction structural equation model, preemptively discover feedback R&D for micro-electric vehicle utilization services in the public field, and actively seek to discover new public mobility support services.

• Korean Journal of Breeding Science
• /
• v.49 no.2
• /
• pp.80-86
• /
• 2017

'Jungmo2501' (Avena sativa L.), a winter oat for forage use, was developed by the breeding team at the National Institute of Crop Science, RDA in 2010. The following is the characteristics of 'Jungmo2501' that is characterized as light green leaf, yellow brown culm and whitish yellow grain. The heading date of 'Jungmo2501' was about 3 days earlier than that of check cultivar 'Samhan'(May 7 and May 10, respectively). Its plant height was 11 cm longer than 103 cm of the check, and the leaf blade ratio of aerial parts was 26 % higher than the check (11.8% and 9.4%, respectively). The cold tolerance, resistance to lodging and wet injury of 'Jungmo2501' were similar to those of the check. The average forage dry matter yield of 'Jungmo2501' harvested at milk-ripe stage was 5% higher than the check ($15.5ton\;ha^{-1}$ and $14.7ton\;ha^{-1}$, respectively). 'Jungmo2501' was higher than the check in terms of protein content (6.6% and 5.9%, respectively), neutral detergent fiber (58.5% and 57.6%, respectively), and acid detergent fiber (34.5% and 32.1%, respectively), while total digestible nutrients was lower than the check (61.6% and 63.6%, respectively), and TDN yield was $0.37ton\;ha^{-1}$ more than that of the check ($9.71ton\;ha^{-1}$ and $9.34ton\;ha^{-1}$, respectively). The silage grade of 'Jungmo2501' estimated by Flig score showed level II, meaning good quality. Fall sowing cropping of 'Jungmo2501' is recommended only for areas where average daily minimum mean temperatures in January are higher than $-6^{\circ}C$.

• Korean journal of psychology:General
• /
• v.36 no.1
• /
• pp.81-107
• /
• 2017

The study aims to investigate the clinical utility of Bayley-III using US norm in Korea. A total of 98 preterm infants and 93 term infants were assessed with the K-Bayley-III. The performance pattern of preterm infants was analyzed with mixed design ANOVA which examined the differences of scaled scores and composite scores of Bayley-III between full term- and preterm- infant group and within preterm infants group. Then, We have investigated agreement between classifications of delay made using the BSID-II and Bayley-III. In addition, ROC plots were constructed to identify a Bayley-III cut-off score with optimum diagnostic utility in this sample. The results were as follows. (1) Preterm infants have significantly lower function levels in areas of 5 scaled scores and 3 developmental indexes compared with infants born at term. Significant differences among scores within preterm infant group were also found. (2) Bayley-III had the higher scores of the Mental Development Index and Psychomotor Developmental Index comparing to the scores of K-BSID-II, and had the lower rates of developmental delay. (3) All scales of Bayley-III, Cognitive, Language and Motor scale had the appropriate level of discrimination, but the cut-off composite scores of Bayley-III were adjusted 13~28 points higher than 69 for prediction of delay, as defined by the K-BSID-II. It explains the lower rates of developmental delay using the standard of two standard deviation. This study has provided empirical data to inform that we must careful when interpreting the score for clinical applications, identified the discriminating power, and proposed more appropriate cut-off scores. In addition, discussion about the sampling for making the Korean norm of Bayley-III was provided. It is preferable that infants in Korea should use our own validated norms. The standardization process to get Korean normative data must be performed carefully.

• Journal of The Korean Association For Science Education
• /
• v.42 no.3
• /
• pp.311-324
• /
• 2022

This study analyzed the types of scientific emoticons made by science-gifted elementary school students and their perceptions on making scientific emoticons. To do this, 71 students from 4th to 6th graders of two gifted science education center in Seoul were selected. Scientific emoticons made by the students were analyzed according to the number and types. Their perceptions on making scientific emoticons were also analyzed through a questionnaire and group interviews. In the analyses for types of text in the scientific emoticons, 'word type' and 'sentence type' were made more than 'question and answer type'. And the majority of students made more 'pun using pronunciation type' and 'mixed type' than other types. They also made more 'graphic type' and 'animation type' than 'text type' in the images of the scientific emoticons. In the analyses for the information of the scientific emoticons, 'positive emotion type' and 'negative emotion type' of scientific emoticons were made evenly. The students made more 'new creation type' than 'partial correction type' and 'entire reconstruction type'. They also used scientific knowledge that preceded the knowledge of science curriculum in their grade level. The scientific knowledge of chemistry was used more than physics, biology, earth science, and combination field. 'Name utilization type' was more than 'characteristic utilization type' and 'principle utilization type'. Students had various positive perceptions in making scientific emoticons such as 'increase of scientific knowledge', 'increase of various higher-order thinking abilities', 'ease of explanation, use, memory, and understanding of scientific knowledge', 'increase of fun, enjoyment, and interest about science and science learning', and 'increase of opportunity to express emotions'. They were also aware of some limitations related to 'difficulties in the process of making scientific emoticons', 'lack of time', and 'limit that it may end just for fun'. Educational implications of these findings are discussed.