• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.3
• /
• pp.249-254
• /
• 1992

This research was conducted to investigate the effects of fly ash applications on growth and yield parameters of corn (Zea mays L.), and soil chemical properties. Corn height at silking stage, and height and dry matter ratio at harvesting stage were enhanced by applications of fly ashes derived from bituminous coal and anthracite, respectively. Effects of fly ash treatment on growth parameters of corn were varied with kinds and levels of fly ash application and growth periods, but relatively small without revealing a major negative effect as compared to the control. Yield of corn was increased by applying fly ash of anthracite origin, but other yield components were not influenced negatively by fly ash treatment. Soil total carbon contents, cation exchange capacity, and phosphorus contents of soils sampled after harvest of corn were significantly increased by fly ash treatment, although there were slightly different effects according to kinds and levels of fly ash application. Exchangeable cations of soils were varied within an experimental error range. Phosphorus taken up by corn was enhanced by treating fly ash of the bituminous coal to the soil and there were a positive correlation between phosphorus uptake and soil Phosphorus level. Cation uptake by corn was changed a little, but no significant reduction was observed in cation uptake due to fly ash treatment. It seems to be difficult to figure out the mechanism of fly ash effects on growth and nutrient uptake by corn with one year field experiment, however treatment of fly ash enhanced some parameters of growth and yield, and nutrient uptake by corn without revealing any major negative effects. To determine the value of fly ash as a fertilizer source, continuous researches under various soil and crop conditions were considered to be necessary.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.142-149
• /
• 1995

This study was conducted to investigate the relationships between yearly variation of climatic components and yearly variations of productivity in monoculture cotton. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components from the four varieties(Kinggus, Yongdang local. 113-4, 380) were collected from 1978 to 1992 in Mokpo area. The meteorological data gathered at the Mokpo Weather Station for the same period were used to find out the relationships between climatic components and productivity. Yearly variation of the amount of precipitation and number of stormy days in July are large with coefficients of the variations(C.V)84.89 and 97.05%, respectively, while yearly variation, of the average temperature, maximum temperature, minimum temperature from May to Sep. are relatively small. Seed cotton yield before frost in Sep. and Oct. very greatly with C.V. of 68.77, 78.52%, respectively. Number of boll bearing branches and lint percentage show more or less small in C.V. with 11.77 and 19.13%, respectively and flowering date and boll opening date show still less variation. Correlation coefficients between precipitation in May and number of boll bearing branches, duration of sunshine in July and number of bolls per plant, maximum temperature in July and total seed cotton before the frost in Sep., Oct., and Nov. evaporation in Aug. are positively sig-nificant at the 1% level. There are highly significantly positive correlated relationships among yield(total seed cotton) and yield components. Total seed cotton yield(Y) can be predicted by multiple regression equation with independent variables of climatic factors in July such as monthly averages of average temperature($X_1$), maximum temperature($X_2$) and minimum temperature($X_3$), monthly amount of precipitation ($X_4$), evaporation($X_5$), monthly average of relative humidity($X_6$), monthly hours with sunshine($X_7$) and number of rainy days($X_8$). The equation is estimatedas Y =-1080.8515 + 144.7133$X_1$+15.8722$X_2$ + 164.9367$X_3$ + 0.0802$X_4$ + 0.5932$X_5$ + 11.3373$X_6$ + 3.4683$X_7$- 9.0846$X_8$. Also, total seed cotton yield(Y) can be predicted by the same method with climatic components in Aug., Y =2835.2497 + 57.9134$X_1$ - 46.9055$X_2$ - 41.5886X$_3$ + 1.2559$X_5$ - 21.9687$X_6$ - 3.3763$X_7$- 4.1080$X_8$- 17.5586$X_9$. And the error between observed and theoretical yield were less with approached linear regression.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.2
• /
• pp.105-111
• /
• 2021

Rice lodging is an annual occurrence caused by typhoons accompanied by strong winds and strong rainfall, resulting in damage relating to pre-harvest sprouting during the ripening period. Thus, rapid estimations of the area of lodged rice are necessary to enable timely responses to damage. To this end, we obtained images related to rice lodging using a drone in Gimje, Buan, and Gunsan, which were converted to 128 × 128 pixels images. A convolutional neural network (CNN) model, a deep learning model based on these images, was used to predict rice lodging, which was classified into two types (lodging and non-lodging), and the images were divided in a 8:2 ratio into a training set and a validation set. The CNN model was layered and trained using three optimizers (Adam, Rmsprop, and SGD). The area of rice lodging was evaluated for the three fields using the obtained data, with the exception of the training set and validation set. The images were combined to give composites images of the entire fields using Metashape, and these images were divided into 128 × 128 pixels. Lodging in the divided images was predicted using the trained CNN model, and the extent of lodging was calculated by multiplying the ratio of the total number of field images by the number of lodging images by the area of the entire field. The results for the training and validation sets showed that accuracy increased with a progression in learning and eventually reached a level greater than 0.919. The results obtained for each of the three fields showed high accuracy with respect to all optimizers, among which, Adam showed the highest accuracy (normalized root mean square error: 2.73%). On the basis of the findings of this study, it is anticipated that the area of lodged rice can be rapidly predicted using deep learning.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.89-97
• /
• 2021

Purpose: The purpose of this study is to compare and evaluate the dose change according to the gas volume variations in the rectum, which was not included in the treatment plan during radiation therapy for cervical cancer. Materials and methods: Static Intensity Modulated Radiation Therapy (S-IMRT) using a 9-field and Volumetric Modulated Arc Therapy (VMAT) using 2 full-arcs were established with treatment planning system on Computed Tomography images of a human phantom. Random gas parameters were included in the Planning Target Volume(PTV) with a maximum change of 2.0 cm in increments of 0.5 cm. Then, the Conformity Index (CI), Homogeneity Index (HI) and PTV D_max for the target volume were calculated, and the minimum dose (D_min), mean dose (D_mean) and Maximum Dose (D_max) were calculated and compared for OAR(organs at risk). For statistical analysis, T-test was performed to obtain a p-value, where the significance level was set to 0.05. Result: The HI coefficients of determination(R²) of S-IMRT and VMAT were 0.9423 and 0.8223, respectively, indicating a relatively clear correlation, and PTV D_max was found to increase up to 2.8% as the volume of a given gas parameter increased. In case of OAR evaluation, the dose in the bladder did not change with gas volume while a significant dose difference of more than D_mean 700 cGy was confirmed in rectum using both treatment plans at gas volumes of 1.0 cm or more. In all values except for D_mean of bladder, p-value was less than 0.05, confirming a statistically significant difference. Conclusion: In the case of gas generation not considered in the reference treatment plan, as the amount of gas increased, the dose difference at PTV and the dose delivered to the rectum increased. Therefore, during radiation therapy, it is necessary to make efforts to minimize the dose transmission error caused by a large amount of gas volumes in the rectum. Further studies will be necessary to evaluate dose transmission by not only varying the gas volume but also where the gas was located in the treatment field.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.417-425
• /
• 2023

The aim of this study was to derive stem taper equations for Quercus acuta, one of main evergreen broad-leaved tree species found in warm temperate regions, and to prepare a stem volume table using those stem taper equations. A total of 688 individual trees were used in the analysis, which were collected from Jeonnam-do, Gyeongnam-do, and Jeju-do. The stem taper models applied to derive the stem curve pattern were the Max and Burkhart, Kozak, and Lee models. Among the three stem taper models, the best explanation of the stem curve shape of Q. acuta was found to be given by the Kozak model, which showed a fitness index of 0.9583, bias of 0.0352, percentage of estimated standard error of 1.1439, and mean absolute deviation of 0.6751. Thus, the stem taper of Q. acuta was estimated using the Kozak model. Moreover,thestemvolumecalculationwasperforme d by applying the Smalian formula to the diameter and height of each stem interval. In addition, an analysis of variance (ANOVA) was conducted to compare the two existing Q. acuta stem volume tables (2007 and 2010) and the newly created stem volume table (2023). This analysis revealed that the stem volume table constructed in the Wando region in 2007 included about twice as much as the stem volume tables constructed in 2010 and 2023. The stem volume table (2023) developed in this study is not only based on the regional collection range and number of utilized trees but also on a sound scientific basis. Therefore, it can be used at the national level as an official stem volume table for Q. acuta.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.2
• /
• pp.119-126
• /
• 2016

Purpose: To analyze the effect of accommodative control and change values between subjective refraction (SR) and auto-refraction (AR) according to application of fogging after accommodative stimulation depending on ametropia type. Methods: Myopic ametropia 76 eyes and hyperopic ametropia 52 eyes participated for this study. SR and AR values measured by three test conditions (Before accommodative stimulation; Before AS, After accommodative stimulation; After AS, and After application of fogging; After AF) were compared, respectively. Results: In myopic eyes, (-)spherical power by SR and AR in After AS test was significantly increased as compared to Before AS test, (-)spherical power in After AF test was decreased to the level of Before AS test. The differences of spherical power between SR and AR were highly measured by SR in After AS test, and highly measured by AR in After AF test, respectively. In hyperopic eyes, (+)spherical power of SR significantly decreased in After AS test compared to Before AS test, more (+)spherical power was detected in After AF test compared to Before AS test. (+)spherical power of AR have no significant difference between Before AS and After AS test, but more (+)spherical power was detected in After AF test compared to Before AS test. The differences of (+)spherical power between SR and AR were significant in all test conditions. Among 52 eyes which were measured as hyperopic ametropia, 7 eyes were measured as myopia by SR in After AS test. In case of AR, 25 eyes among 52 eyes were mismeasured as myopia of ranges from -0.25 D to -1.25 D in Before AS test, 26 eyes in After AS test, and 19 eyes in After AF test were mismeasured as myopia of ranges from -0.25 D to -1.25 D. Conclusions: Regardless of ametropia type, accommodative control by After AF test was effective on both refraction process. However, in auto-refraction for hyperopic eyes, the misdetermined proportion of refractive error's type was high due to consistent accommodative intervention in all test condition. Therefore, in order to obtain an accurate value of refractive errors, full correction should be determined by subjective refraction process after fogging method.

• Journal of Science Education
• /
• v.34 no.2
• /
• pp.225-236
• /
• 2010

The purpose of this study is to analyze and evaluate the Cyber Home Learning contents of Earth science area in the basic course of the $10^{th}$ grade. For this purpose, we applied the 'Cyber Home Study Content Quality Control Tool' presented in Elementary Secondary Education e-Learning Quality Management Guidelines (Ver.2.0)' of Korea Education & Research Information Service(2008). The results of Cyber home learning contents analysis are as follow: First, it was presented that the study guide introduced the contents which should be studied for one class, properly. And it was not analyzed that the diagnosis assesment was not completed in the initiative study; Second, it was possible to study choosing the contents fitting the learner's level of learning in the main study, it was comprised of about 10 minutes. Third, it was performed without feedback for incorrect answers in the learning assessment, just the number of wrong questions. And the learning arrangement present the important contents learned in that class, summarizing and arranging again. The results of evaluating the contents in Cyber Home Learning are as follows: First, in evaluation section of instructional design, many text materials which were so difficult for learners to read were explained, being provided. Besides, the systematic structures leaves much to be desired, in view of learners' learning experience, contents, and environment. And in evaluation section of learning contents, the error of contents caused the learning contents not to appear, the amount of learning in each section was found too much. Second, in evaluation section of the strategy for Teaching and Learning, when we mention the strategy of Self Directed Learning, the environment to make learners search for information free and self-study possible was not possessed well. And in evaluation section of interaction, it was found that a simple click caused the learning to go on. Third, in evaluation section of evaluating, it was evaluated that there was wanting in consistency in learning aims, contents, evaluation contents.

• Fashion & Textile Research Journal
• /
• v.6 no.1
• /
• pp.41-50
• /
• 2004

This research proposes the on-stage costumes for the play Hamlet of Shakespeare performed by Yunheedan Guhri Pae - the Street Theater Troupe. Stage costumes have an important role in displaying the characteristics of each characters to the audience and has big visual effects. However, in order to design the costumes in the object viewpoints of the audience, the survey on the images of the characters who had actually watched the performance was taken place and proposed the costume design according to the results of the survey. Hamlet a: This result was applied to propose a sweater in black color, black leather pants and vest. Hamlet b: This result was applied to propose hooded coat in purple in middle level of brightness and color spectrum and yellow coat. For free image, loose pants in blue and vest in the same color tone were proposed. Gertrude a: This result was applied to use purple (violet) with reddish tone to propose the formation of a dress applying tailored suit. Gertrude b: This result was applied to propose purple gown and the one-piece dress with black laces. Ophelia a: This result was applied to propose feminine white dress and cape in purple color tone. Ophelia b: This result was applied to propose dyed and weaved clothes. Through the surveys as above, the images of each character was driven in adjectives, and using the results driven from the brightness, coloration, and color, color images were proposed. Only one costume cannot make up for the stage costumes and because it exists as an element of stage production, it is true that costumes are limited in some areas. However, that limit can become the motive of the costume. There is a limit, which the designer cannot produce the costumes as he or she had designed but I believe it is the center of the on-stage customers to display the characteristics of the characters according to the given concept. The limit of this research is the fact that because the costumes were designed so they fit the conditions already given, thus it was difficult to regard the process of designing and producing the costume as a project done according to the interaction. And in the future, if it is possible, I wish for the joint research with the people responsible for stage art to take place as a practical stage art. It was possible to produce practical costume since they were produced for actual performance and the production of costumes considering the dance steps, line of flow, and acting, was able to reduce the trial and error on stage. Through this research, I felt that the understanding and smooth interaction on diverse other areas not limited to the costume design should be taken place and believe that this was a research that proposes new research method since there had been only a few previous research regarding the on-stage costumes for actual performances. Therefore, this research had depended on the surveys given to the audiences to endow objectivity, however, I wish this research can contribute to defining effective process and methods for the on-stage costumes with more active researches with diverse methods and in diverse areas. I am sorry that the costume production for all the characters and all the scenes in Hamlet couldn't be done due to many limitations. As the following research assignment, I am planning on designing the costumes for all the scenes.

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.2
• /
• pp.97-102
• /
• 2011

Purpose: IMRT QA using 2Dimensional array detector is carried out with condition for discrete dose distribution clinically. And it can affect uncertainty of evaluation using gamma method. We analyze gamma index variation according to grid size and suggest validate range of grid size for IMRT QA in Hospital. Materials and Methods: We performed QA using OniPro I'mRT system software version 1.7b on 10 patients (head and neck) for IMRT. The reference dose plane (grid size, 0.1 cm; location, [0, 0, 0]) from RTP was compared with the dose plane that has different grid size (0.1 cm, 0.5 cm, 1.0 cm, 2.0 cm, 4.0 cm) and different location (along Y-axis 0 cm, 0.2 cm, 0.5 cm, 1.0 cm). The gamma index variation was evaluated by observing the level of changes in Gamma pass rate, Average signal, Standard deviation for each case. Results: The average signal for each grid size showed difference levels of 0%, -0.19%, -0.04%, -0.46%, -8.32% and the standard deviation for each grid size showed difference levels of 0%, -0.30%, 1.24%, -0.70%, -7.99%. The gamma pass rate for each grid size showed difference levels of 0%, 0.27%, -1.43%, 5.32%, 5.60%. The gamma evaluation results according to distance in grid size range of 0.1 cm to 1.0 cm showed good agreement with reference condition (grid size 0.1 cm) within 1.5% and over 5% in case of the grid size was greater than 2.0 cm. Conclusion: We recognize that the grid size of gamma evaluation can make errors of IMRT QA. So we have to consider uncertainty of gamma evaluation according to the grid size and apply smaller than 2 cm grid size to reduce error and increase accuracy clinically.

• Journal of The Korean Association For Science Education
• /
• v.32 no.5
• /
• pp.903-927
• /
• 2012

The study aimed to analyze middle school students construction of physics inquiry problems for open inquiry from the viewpoint of variable isolation and clarification, and investigate students' difficulties during the processes of variable isolation and clarification to get implications for teaching and learning strategies for small group open inquiry activities which have been included in the 2007 national curriculum. The participants were 4 students who had attended an outreach program for the science gifted run by a university institution located in Seoul area. They performed an open inquiry on egg drop for 13 lessons for 30 hours. Level descriptions for variable isolation and clarification have been developed and applied to analyze students' inquiry problems and variables included by the problems. Students iterated inquiry processed 5 times and the inquiry problem showed progress gradually. Dependent variables have been isolated ahead and the levels of variable isolation and clarification showed higher than the independent variables. Many kinds of independent variables isolated extensively and the independent variables and control variables have been mingled. One of the reasons why students had some difficulties in isolation of independent variables could be the absence of theoretical models. The realities of school lab could restrict the variable isolation and clarification as well as topic selections. Some sensory or extensive variables such as broken eggs and drop height seem to be salient to be focused on as core variables. Lack of background knowledges could be one of the reasons for students' difficulties in variable clarification, such as theoretical definitions and operational definitions. As a result of lacking background knowledges, students could not construct theoretical models even though they could isolate and clarify variables as scientific lexical definitions. Some perceptions of inquiry as trial and error or reckless establishment of causal relations between variables could be accounted as one reason.