• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.379-382
• /
• 2004

In this paper we fabricated a test panel for AMOLED on glass and PET substrate. The test panel consisted of the various size of OTFTs and OLEDs and the current driving capability of OTFTs for OLEDs has been investigated. OTFTs were made of the inverted staggered structure and employed polyvinylphenol (PVP) as the gate insulator and pentacene thin film as the active layer. The OTFTs produced the filed effect mobility of $0.3 cm^2/V.sec$ and on/off current ratio of $10^5$. OLEDs consisted of TPD for HTL and Alq3 for EML with 35nm thick, generating green monochrome light. We found that OTFT with channel length of 70${\mu}m$ and channel width of over 3.5mm provided the sufficient current to OLED to generate the luminescence of $0.3Cd/m^2$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.6
• /
• pp.225-231
• /
• 2008

For an aspect ratio (transport length-to-width) of 5, Pr=1.13, Le=1.91, Pe=4.3, Cv=1.01, $P_B=20\;Torr$, the effects of addition of inert gas Ne on thermally buoyancy-driven convection ($Gr=2.44{\times}10^3$) are numerically investigated for further understanding and insight into essence of transport phenomena in two dimensional horizontal enclosures. For $10K{\leq}{\Delta}T{\leq}50\;K$, the crystal growth rate increases from 10 K up to 20 K, and then is slowly decreased until ${\Delat}T=50\;K$, which is likely to be due to the effects of thermo-physical properties stronger than the temperature gradient corresponding to driving force for thermal convection. The dimensional maximum velocity gratitude reflecting the intensity of thermal convection is directly and linearly proportional to the temperature difference between the source and crystal regions. The rate is first order-exponentially decreased for $2{\leq}Ar{\leq}5$. This is related to the finding that the effects of side walls tend to stabilize convection in the growth reactor. In addition, the rate is first order exponentially decayed for $10{\leq}P_B{\leq}200\;Torr$.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.5
• /
• pp.474-483
• /
• 2014

The majority of existing WECs (wave energy converters) are designed to achieve maximum power at a resonance condition. In the case of a single WEC, its size must be large enough for tuning, and it has high efficiency only within a limited frequency band. Recently, wave power extraction by deploying many small buoys in a compact array has been studied under the assumption that the buoy's size and separation distance are much smaller than the water depth, wave length, and size of the array. A boundary value problem involving the macro-scale boundary condition on the mean surface covered by an infinite strip of buoys is solved using the eigenfunction expansion method. The energy extraction efficiency (${\varepsilon}=1-R^2_f-T^2_r$), where $R_f$ and $T_r$ are the reflection and transmission coefficients for a strip array of buoys, is assessed for various combinations of packing ratio, strip width, and PTO damping coefficient.

• Computers and Concrete
• /
• v.21 no.2
• /
• pp.117-126
• /
• 2018

This research investigate the behavior of reinforced normal and lightweight aggregate concrete hollow core slabs with different core shapes, shear span to effective depth (a/d). The experimental work includes testing seven reinforced concrete slabs under two vertical line loads. The dimensions of slab specimens were (1.1 m) length, (0.6 m) width and (0.12 m) thickness. The maximum reduction in weight due to aggregate type was (19.28%) and due to cross section (square and circular) cores was (17.37 and 13.64%) respectively. The test results showed that the decrease of shear span to effective depth ratio from 2.9 to 1.9 for lightweight aggregate solid slab cause an increase in ultimate load by (29.06%) and increase in the deflection value at ultimate load or the ultimate deflection by (17.79%). The use of lightweight aggregate concrete in casting solid slabs give a reduction in weight by (19.28%) and in the first cracking and ultimate loads by (16.37%) and (5%) respectively for constant (a/d=2.9).The use of lightweight aggregate concrete in casting hollow circular core slabs with constant (a/d=2.9) (reduction in weight 32.92%) decrease the cracking and ultimate loads by (12%) and (5.18%) respectively with respect to the solid slab. These slab specimens were analyzed numerically by using the finite element computer program ANSYS. Good agreements in terms of behavior, cracking load (load at first visible crack) and ultimate load (maximum value of testing load) was obtained between finite element analysis and experimental test results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.1051-1061
• /
• 1995

In order perform leak-before-break design of nuclear piping systems and integrity evaluation of reactor vessels, full stress-strain (.sigma. - .epsilon.) curves and fracture resistance (J-R) curves are required. However it is time-consuming and expensive to obtain J-R curves experimentally. The objective of this paper is to develop two methods for J-R curve prediction. In the first method, elastic-plastic finite element analyses for a series of crack length / specimen width ratio were performed. Accordingly the load versus load line displacement (P .delta.) curve corresponding to the fracture strain is obtained and the J-R curve based on the generalized locus method is obtained. In the second method, the correlation between .sigma.-.epsilon. curves and J-R curves was statistically analyzed and an empirical equation to predict the J-R curve from the .sigma.-.epsilon. test result is proposed. A good correlation between the predicted results based on the proposed methods and the experimental ones is obtained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1034-1037
• /
• 2004

In this paper we fabricated a test panel for AMOLED on glass and PET substrate. The test panel consisted of the various size of OTFTs and OLEDs and the current driving capability of OTFTs for OLEDs has been investigated. OTFTs were made of the inverted staggered structure and employed polyvinylphenol (PVP) as the gate insulator and pentacene thin film as the active layer. The OTFTs produced the filed effect mobility of 0.3$cm^2$/V.sec and on/off current ratio of $10^5$. OLEDs consisted of TPD for HTL and Alq3 for EML with 35nm thick, generating green monochrome light. We found that OTFT with channel length of 70${\mu}m$and channel width of over 3.5mm provided the sufficient current to OLED to generate the luminescence of 0.3Cd/$m^2$.

• Korean Journal Plant Pathology
• /
• v.11 no.3
• /
• pp.282-284
• /
• 1995

Grey leaf spot on tomato plants was first observed in Sedo-myeon, Puyo-kun, Chungnam province of Korea in 1994. This disease which had not been reported before in Korea exhibited different symptoms from those of other leaf spot diseases on tomato plants. The symptoms were characterized by small irregular-shaped spots on leaves at the initial stage of the infection, subsequent spread and coalescence of the spots throughout the leaves with ultimate necrosis, and abscission from the plants. When healthy tomato plants were inoculated with a conidial suspension of the fungus isolated from the lesion of a diseased plant in a field, the same characteristic symptoms as those in the field were produced. Furthermore, the same pathogen could be reisolated from the lesions formed buy the inoculation. Conidial characteristics of the pathogen were as follows; oblong shape with constricted 3 transverse septa, round-shaped base, round- or point-shaped apex, size of 45~75$\times$12.5~17.5 ${\mu}{\textrm}{m}$, and 3.5 : 1 ratio of length to width. The pathogen was identified as Stemphylium lycopersici and thus this is the first report on the occurrence of grey leaf spot disease on tomato plants caused by s. lycopersici in Korea.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.4
• /
• pp.448-454
• /
• 1996

This studies was carried out to know the effects of $ultraviolet-B(280{\sim}320nm)$ irradiation on the initial growth of Tilia amurensis Rupr. seedlings. UV-B irradiation inhibited the hypocotyl elongation, height growth, leaf growth, and chlorophyll formation. The inhibition was dose-dependent, and consequently those growths were more inhibited depending on the increase of UV-B levels. Morphological change such as leaf length/leaf width ratio was also observed in the leaves of irradiated seedlings. UV-B irradiation produced scorching, glazing or chlorosis, and stunting or dwarfing in the first or second leaf of the seedlings.

• Ecology and Resilient Infrastructure
• /
• v.3 no.1
• /
• pp.14-21
• /
• 2016

This study investigated the behavior of sediment bars in a compound channel with a drop structure. Flow was separated into side banks by alternate bars, and flow was concentrated into the downstream of bar fronts. The bed downstream of a drop structure degradated due to the concentrated flow from it. Bar shapes were kept by the influence of their shapes upstream. Alternate bars, central bars, and multiple bars were developed as the width to depth ratio increased, and the number of bars increased. The bar in the downstream of a drop structure decreased in length due to the concentration of flow and its disturbance.

• Applied Microscopy
• /
• v.42 no.3
• /
• pp.124-128
• /
• 2012

Leaf surface structures were investigated in the Chinese juniper Juniperus chinensis by scanning electron microscopy. Adult scale leaves were collected from the tree, air-dried at room temperature, and sputter-coated with gold without further specimen preparation. Approximately fi ve stomata were locally distributed and arranged in clusters on the leaf surface. Stomata were ovoid and ca. 40 ${\mu}m$ long. The epicuticular wax structures of J. chinensis leaves were tubules and platelets. Numerous tubules were evident on the leaf regions where stomata were found. The tubules were cylindrical, straight, and ca. 1 ${\mu}m$ in length. They almost clothed the stomatal guard cells, and occluded the slit-shaped stomatal apertures. Moreover, the wax ridges were flat crystalloids that were connected to the surface by their narrow side. They did not have distinct edges, and their width/height ratio varied. In particular, the wax ridges could be discerned on the leaf regions where stomata were not present nearby. Since the wax ridges did not have distinct edges on their margin, they were identified as platelets. Instances were noted where platelets were oriented either parallel to each other or perpendicular to the cuticle surface. These results can be used in biomimetics to design the hierarchical structures for mimicking the plant innate properties such as hydrophobicity and self-cleaning effects of the leaf surface.