• Title/Summary/Keyword: length-width ratio

Search Result 894, Processing Time 0.032 seconds

The Electric Properties of Multilayer Ceramic Capacitors with $(Ba,Ca)(TiZr)O_3$ Ceramics ($(Ba,Ca)(TiZr)O_3$ 세라믹을 적용한 적층 칩 커패시터의 전기적 특성)

  • Yoon Jung-Rag;Yeo Dong-Hun;Lee Heun-Young;Lee Suk Won
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.55 no.1
    • /
    • pp.1-5
    • /
    • 2006
  • The effect of A/B moi ratios and sintering temperatures on dielectric properties and microstructure of $(Ba_{0.93}Ca_{0.07})_m(Ti_{0.82}Zr_{0.18})O_3$ ceramics were investigated. The dielectric constant decreased with increasing the A/B mol ratio. However, the dielectric loss is improved. As the dielectric properties of A/B mol ratio with m = 1.009 at sintered temperature $1260^{\circ}C$, we obtained dielectric constant 12,800, dielectric loss $3.5\%$ and Y5V temperature characteristics. Highly reliable Ni-MLCCs, 1.6mm$(length){\time}0.8mm(width){\time}0.8mm$(height) with capacitance of 1.23 ${\mu}F$ and 야ssipation loss of $5.2\%$ were obtained employing dielectric material composed of $(Ba_{0.93}Ca_{0.07})_{1.009}(Ti_{0.82}Zr_{0.18})O_3$ - $MnO_2\;0.2wt\%-Y_2O_3\;0.18wt\%,\;-\;SO_2\;0.15wt\%-(Ba_{0.4}Ca_{0.6})SiO_3\;1wt\%$.

Cross-generational Effect of Bisphenol A on the Harpacticoid Copepod Tigriopus west: A Full Life Cycle Toxicity Test

  • Bang, Hyun Woo
    • Korean Journal of Environmental Biology
    • /
    • v.36 no.4
    • /
    • pp.456-462
    • /
    • 2018
  • The purpose of this study was to assess cross-generational effects of bisphenol A exposure in benthic copepods, Tigriopus west. Nauplii (<24 hours old) were exposed to graded concentrations of bisphenol A, and toxicity end-points such as survival, development, sex ratio, and fecundity were measured. $F_1$ generations were grown under innoxious conditions, and similarly assessed. Significant differences were observed in development of nauplii and copepodites, between exposed and non-exposed copepods; however, there were no differences in survival of nauplii or copepodites, sex ratio, or brooding rate in parental generation. In contrast, in the $F_1$ generation, there were significant differences between the control group and exposed group in survival and development of nauplii. Length, width, and biomass of parental and $F_1$ generations were reduced in the exposed group compared to the control group. In addition, some deformities, such as swelling of the prosome, abnormally shaped egg sac, and dwarfism were observed after exposure to bisphenol A. So, our study demonstrates that a cross-generation toxicity test and monitoring of morphological deformities in harpacticoid copepods, can be useful for development of potential bioindicators for environmental monitoring, and assessment of chemical impact.

Coupled evaluation of the free vibration characteristics of magneto-electro-elastic skew plates in hygrothermal environment

  • Mahesh, Vinyas;Kattimani, Subhaschandra;Harursampath, Dineshkumar;Trung, Nguyen-Thoi
    • Smart Structures and Systems
    • /
    • v.24 no.2
    • /
    • pp.267-292
    • /
    • 2019
  • The present article addresses the coupled free vibration problem of skew magneto-electro-elastic plates (SMEE) considering the temperature-moisture dependent material properties. The plate kinematics follows Reddy's higher order shear deformation theory. With the aid of finite element methods, the governing equations of motion are derived considering the Hamilton's principle and solved by adopting condensation technique. The influence of different temperature and moisture dependent empirical constants on the frequency response of SMEE plate has been assessed. In addition, the natural frequencies corresponding to various fields are evaluated and the effect of empirical constants on these coupled frequencies is determined. A detailed parametric study has been carried out to assess the individual effects of temperature and moisture dependent empirical constants along with their combined effect, aspect ratio, length-to-width ratio, stacking sequence and boundary conditions. The results reveal that the external environment as well as the geometrical skewness has a significant influence on the stiffness of the SMEE plates.

Comparison of Gait Patterns of Elementary School Male Student in Higher Grades Pursuant to Character Styles (초등학교 고학년 남학생의 성격 유형에 따른 보행형태 비교)

  • Lee, Min Ji;Lee, Ki Chung;Kwak, Chang Soo
    • Korean Journal of Applied Biomechanics
    • /
    • v.29 no.1
    • /
    • pp.9-13
    • /
    • 2019
  • Objective: The aim of this study was to compare gait patterns of elementary school male students in higher grades according to their character styles. Method: 4 extroverted character male subjects (height: $141.35{\pm}7.75cm$, weight: $43.65{\pm}5.80kg$) and 4 introverted character male subjects (height: $145.38{\pm}8.94cm$, weight: $42.15{\pm}10.71kg$) participated in this study. Results: As for walk styles of elementary school male students in higher grades according to their character patterns, there was not significant differences in gait cycle, stride width, stride length and walking speed. According to examination of average ratio of maximum vertical ground reaction force according to their characters divided by weight, elementary school male students in higher grades with extroverted character showed 114.69% of weight and students with introverted character showed 122.82% of weight, which exhibited that students with introverted character had larger ratio as much as 8.13% than students with extroverted character. The statistical significance level was 0.000 showing significant difference. Conclusion: Our results indicated that male students in higher grades with introverted character press ground hard and walk with strong steps. On the other hand, male students with extroverted character walk with light steps.

Improved analytical formulation for Steel-Concrete (SC) composite walls under out-of-plane loads

  • Sabouri-Ghomi, Saeid;Nasri, Arman;Jahani, Younes;Bhowmick, Anjan K.
    • Steel and Composite Structures
    • /
    • v.38 no.4
    • /
    • pp.463-476
    • /
    • 2021
  • The concept of using Steel-concrete (SC) composite walls as retaining walls has recently been introduced by the authors and their effectiveness of resisting out-of-plane loads has also been demonstrated. In this paper, an improved analytical formulation based on partial interaction theory, which has previously been developed by the authors, is presented. The improved formulation considers a new loading condition and also accounts for cracking in concrete to simulate the real conditions. Due to a limited number of test specimens, further finite element (FE)simulations are performed in order to verify the analytical procedure in more detail. It is observed that the results from the improved analytical procedure are in excellent agreement with both experimental and numerical results. Moreover, a detailed parametric study is conducted using the developed FE model to investigate effects of different parameters, such as distance between shear connectors, shear connector length, concrete strength, steel plate thickness, concrete cover thickness, wall's width to thickness ratio, and wall's height to thickness ratio, on the behavior of SC composite walls subjected to out-of-plane loads.

Preliminary strong ground motion simulation at seismic stations within nuclear power plant sites in South Korea by a scenario earthquake on the causative fault of 2016 Gyeongju earthquake

  • Choi, Hoseon
    • Nuclear Engineering and Technology
    • /
    • v.54 no.7
    • /
    • pp.2529-2539
    • /
    • 2022
  • Stochastic and an empirical Green's function (EGF) methods are preliminarily applied to simulate strong ground motions (SGMs) at seismic stations within nuclear power plant (NPP) sites in South Korea by an assumed large earthquake with MW6.5 (scenario earthquake) on the causative fault of the 2016 Gyeongju earthquake with MW5.5 (mainshock). In the stochastic method, a ratio of spectral amplitudes of observed and simulated waveforms for the mainshock is assumed to be an adjustment factor. In the EGF method, SGMs by the mainshock are simulated assuming SGMs by the 2016 Gyeongju earthquake with MW5.0 (foreshock) as the EGF. To simulate SGMs by the scenario earthquake, a ratio of fault length to width is assumed to be 2:1 in the stochastic method, and SGMs by the mainshock are assumed to be EGF in the EGF method. The results are similar based on a bias of the simulated response spectra by the two methods, and the simulated response spectra by the two methods exceeded commonly standard design response spectra anchored at 0.3 g of NPP sites slightly at a frequency band above 4 Hz, but considerable attention to interpretation is required since it is an indirect comparison.

Heat transfer study of double diffusive natural convection in a two-dimensional enclosure at different aspect ratios and thermal Grashof number during the physical vapor transport of mercurous bromide (Hg2Br2): Part I. Heat transfer

  • Ha, Sung Ho;Kim, Geug Tae
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.32 no.1
    • /
    • pp.16-24
    • /
    • 2022
  • A computational study of combined thermal and solutal convection (double diffusive convection) in a sealed crystal growth reactor is presented, based on a two-dimensional numerical analysis of the nonlinear and strongly coupled partial differential equations and their associated boundary conditions. The average Nusselt numbers for the source regions are greater than those at the crystal regions for 9.73 × 103 ≤ Grt ≤ 6.22 × 105. The average Nusselt numbers for the source regions varies linearly and increases directly with the thermal Grashof number form 9.73 × 103 ≤ Grt ≤ 6.22 × 105 for aspect ratio, Ar (transport length-to-width) = 1 and 2. Additionally, the average Nusselt numbers for the crystal regions at Ar = 1 are much greater than those at Ar = 2. Also, the occurrence of one unicellular flow structure is caused by both the thermal and solutal convection, which is inherent during the physical vapor transport of Hg2Br2. When the aspect ratio of the enclosure increases, the fluid movement is hindered and results in the decrease of thermal buoyancy force.

Evaluation of leaf morphology for distinguishing Prunus (Rosaceae) from Jeju, Korea (제주도산 벚나무속 잎 형질의 분류학적 검토)

  • Kim, Chan-Soo;Moon, Myung-Ok;Cheong, Eun Ju;Byun, Gwang Ok
    • Korean Journal of Plant Taxonomy
    • /
    • v.35 no.2
    • /
    • pp.81-98
    • /
    • 2005
  • Leaf morphology was examined for Prunus species from Jeju Island. Analyzed were the leaf blade length, petiole length, width of blade, number of veins and angle of the base to the mid-vein as quantitative characters and the distribution of trichome, position of glandsand leaf features qualitative characters. A total of 25 OTU were phenetically analyzed by UPGMA. The resuling phenograms slightly differ from the currently recognized taxonomic system in two points. Prunus mume was clustered with P. padus and P. buergeriana. Prunu spendula and P. yedoensis were separated from the cluster of P. jaamasakura, P. speciosa, P. sargentii and P. jamasakura var. quelpaertensis. Except for the members of subgenus Cerasus, subgenera Padus (P. buergeriana and P. padus), Microcerasus (P. japonica) and Amygdalus were well defined. Some morphological characters of leaves such as the ratio of blade length to width, the length of blade to petiole, number of veins, the distance between the gland and base, the angle of base to mid-vein, and the distribution of trichome were useful as diagnostic features for Prunus from Jeju Island.

Effect of foliar spraying 6-benzylaminopurine on the growth and flowering of Sedirea japonica seedling (6-benzylaminopurine의 엽면살포가 나도풍란 유묘의 생장 및 개화에 미치는 영향 분석)

  • Jiae An;Hyeong-Bin Park;Pyoung-Beom Kim;Hwan-Joon Park;Seongjun Kim;Chang-Woo Lee;Byoung-Doo Lee;Ju-Hyoung Baek;Nam-Young Kim;Jung-Eun Hwang
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.26 no.6
    • /
    • pp.155-164
    • /
    • 2023
  • Sedirea japonica is one of the critically endangered species in South Korea mostly due to artificial harms such as illegal collection and habitat destruction. Therefore, artificial propagation through improving germination rate, increasing growth, and controlling flowering is meaningful for the conservation and reintroduction of S. japonica. It is suggested that cytokinins are one of the multi-factors that contribute to plant growth and floral responses. Especially, exogenous cytokinins have been known to induce or promote shoot growth or earlier flowering in orchids. Therefore, it was investigated how the application of 6-benzylaminopurine (BA) influenced the growth and inflorescence of S. japonica. A foliar spray containing BA at 100, 200, 300, and 400 ppm was applied from 1st July to 30th December 2021. Leaf length, leaf length growth rate, leaf width, and width and length ratio were measured as growth-related factors. Visible inflorescence rate, inflorescence length, the number of flowers per inflorescence, and the distance between the stalks were measured as flowering-related factors. Growth-related factors except for leaf growth rate were not affected by BA treatments, while leaf growth rate was significantly increased by 200 ppm of BA treatment. The visible inflorescence rate increased by 200 ppm of BA treatment, and there seems an optimal concentration and threshold of BA treatment. An iterative experiment with more seedlings and measurement factors would be helpful to figure out the effects of exogenous BA treatment on S. japonica, and it can be applied for mass propagation.

Effect of Nitrogen component and Ge Composition on Growth in the Cultivation of ICT-based Ginseng Process (ICT 기반의 인삼 공정 육묘 시 질소 형태와 게르마늄(Ge) 유무가 생장에 미치는 영향)

  • Dong Hyun, Kim;Yeon Bok, Kim;Hyun Jung, Koo;Hyun Jin, Baek;Su Bin, Lee;Jeei Hye, Choi;Eui Gi, Hong;Kwang Jin, Chang
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.24 no.4
    • /
    • pp.11-17
    • /
    • 2022
  • Ginseng hydroponic cultivation was cultivated as a nutrient solution and the growth was investigated 60 days later. The length(cm) increased from EC1.0 and EC2.0 concentrations to 5.47cm before, followed by EC0.5, 2.5, 1.5, and 0.0. The weight(g) increased from EC1.0 concentration to 2.39g before, followed by EC1.5, 2.5, 0.5, 0.0 and 2.0. The width(mm) increased from EC1.0 concentration to 1.9mm than before, followed by EC2.5, 0.5, 1.5, 2.0, and 0.0. In the ginseng growth experiment according to nutritional components, the average length of NO3-N mixed experiment increased to 0.33cm, the average weight of 0.04g, and the average width of 0.35mm. In the experiment in which NH4-N was mixed without NO3-N, the growth was reduced to 0.37cm in average length, 0.03g in average weight, and 0.22mm in average width. In an experiment in which germanium(Ge) is mixed with a nutrient component, the average length is increased to 0.33cm, the average weight is increased to 0.04g, and the average width is increased to 0.35mm, but in an experiment excluding germanium(Ge), the growth is reduced to 0.11cm, the average weight is 0.04g, and the average width is 0.03mm.