• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.6
• /
• pp.937-954
• /
• 2010

This study analyzes the body characteristics of Korean obese women using 2004 Size Korea data. For selecting the obesity sample, 7 obesity judgment indices were chosen from previous clothing-related studies. A total of 636 females defined as "obese" by 5 out of 7 indices were selected as subjects for this study. 54 body measurements and obesity judgment indices were used. First, the subjects had a BMI 27.11, R$\ddot{o}$hrer index 1.76, Vervaeck index 104.77, Relative weight 133.00, and WHR 0.90. In the case of the distribution by age groups, the twenties were 6.4% of the entire subjects, the thirties were 18.2%, the forties were 16.4%, the fifties were 37.4%, and the sixties were 21.5%. The result of the ANOVAs (divided into 5 age groups) showed significant differences in 41 measurement items except for bust circumference, waist length front, and all of obesity judgment indices. Second, according to the ANOVAs among stature groups divided by 5cm pitches there are significant differences in all measurements except for bust circumference. The results of the ANOVAs among bust circumference groups divided by 5cm pitches show that significant differences were observed in all measurements except four measurement items (including body rise). According to the ANOVAs among the waist circumference groups divided by 5cm pitches, there are no significant differences in all height measurements and shoulder length, waist to hip length, and crotch length. It is confirmed that stature and bust circumference have a deep relationship with measurements other than waist circumference. Third, as the factor analysis were conducted using 39 measurement items to extract the body characteristics of obese women Factor 1 is "circumference measurements & obesity judgment indices," Factor 2 is "heights & arm-related lengths," and Factor 3 is "size and ratio of waist circumference & hip circumference." Factor 4 was "lengths in upper body," Factor 5 was "back width in upper body," Factor 6 was "side neck point to bust & bust circumference," Factor 7 was "length in lower body & arm circumferences," and Factor 8 was "neck base circumference & front widths in upper body." These 8 factors explained 76.54% of the total variance.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.234-244
• /
• 2013

This study was conducted to determine the factors affecting to seed characteristics and seedling growth of Zelkova serrata. The seeds were collected from sixteen populations of Z. serrata and the seed characteristics (i.e., seed length, width, weight and full seed rate) were measured. We also measured the 1-year-old seedling growth of each population at nursery. All seed characteristics showed significant differences in population level. Seed length and seed width were positively correlated with latitude, longitude, altitude and distance from coast line of sampling site. Seed length and seed width also negatively correlated with annual mean temperature, mean temperature of growing season (Mar.~Oct.). The ratio of seed length/seed width showed inverse trend in case of seed length and seed width. Seed weight/1,000 grains had no correlation with geographic factors but showed negative correlation with annual mean dryness index. Seed weight/L showed negative correlation with latitude and longitude and positive correlation with mean temperature of growing season of sampling site. Full seed rate showed negative correlation with latitude, longitude and annual mean dryness index of sampling site. There were significant differences among populations, among family within population and among individuals within family in seedling growth. Height and diameter of root collar of seedling showed negative correlation with longitude and mean humidity of growing season of sampling site. Height growth of seedlings was not correlated with any seed characteristics but, diameter at root collar showed low negative correlation with seed weight/1,000 grains and seed weight/L. We discussed the implications of the results in view of tree improvement of Z. serrata.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.486-494
• /
• 2021

Watermelon (Citrullus lanatus (Thunb.) Matsum. & Nakai) is sensitive to low temperature and shows retarded growth under 10℃. Although early transplanting guarantees higher returns, it requires cost and labor to maintain the appropriate temperature for plant growth. Therefore, cultivars tolerant to chilling stress is necessary to reduce the cost and labor requirements. The purpose of this study is to analyze data on plant growth and fruit enlargement under continuous chilling night temperature to develop new cultivars tolerant to chilling temperature. Two cultivars expected to have chilling tolerance and another cultivar sensitive to chilling temperature were grown in greenhouses with chilling and optimal night temperature conditions. In the early growth stage after transplanting, the cultivars expected to have chilling tolerance showed better vine length, fresh weight and dry weight. However, one of the tolerant cultivars showed significantly lower vine length, leaf length and width, and petiole length than the sensitive cultivar during pollination period and later growth stage, showing genotype specific responses. The fruit length, width, and weight were also significantly lower in the tolerant cultivar. The fruit set ratio was significantly higher in the chilling sensitive cultivar than the two tolerant cultivars. These results suggest that the present chilling tolerant cultivars in watermelon were selected based on their performance in the early growth stage, and further studies on chilling tolerance in different growth and development stages are required to develop cultivars adapted to various forcing cultivation systems.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.4
• /
• pp.139-144
• /
• 2007

[ $BaWO_4$ ] crystals were synthesized using bidentate ligands. The reaction parameters such as the concentration of ligand and molar ratio of $[WO_4^{2-}]/[Ba^{2+}]$ played important roles in the formation of $BaWO_4$ crystals with various morphologies. When TMEDA was used as a ligand, the microrods of $BaWO_4$ crystals with length of $15{\sim}20{\mu}m$ were formed via the self assembly of cross-like plates of 250 nm in width and $2{\sim}3{\mu}m$ in length.

• Steel and Composite Structures
• /
• v.3 no.4
• /
• pp.261-275
• /
• 2003

Truss members built-up with double angles back-to-back have monosymmetric cross-section and twisting always accompanies flexion upon the onset of buckling about the axis of symmetry. Approximate formulae for calculating the buckling capacity are presented in this paper for routine design purpose. For a member susceptible only to flexural buckling, its optimal cross-section should consist of slender plate elements so as to get larger radius of gyration. But, occurrence of twisting changes the situation owing to the weakness of thin plates in resisting torsion. Criteria for limiting the leg slenderness are discussed herein. Truss web members in compression are usually considered as hinged at both ends for out-of-plane buckling. In case one (or both) end of member is not supported laterally by bracing member, its adjoining members have to provide an elastic support of adequate stiffness in order not to underdesign the member. The stiffness provided by either compression or tension chords in different cases is analyzed, and the effect of initial crookedness of compression chord is taken into account. Formulae are presented to compute the required stiffness of chord member and to determine the effective length factor for inadequately constrained compressive diagonals.

• Advances in nano research
• /
• v.8 no.3
• /
• pp.191-202
• /
• 2020

The article brings the study of nonlocal, surface and the couple stress together to apparent the frequency retaliation of FG nanobeams (Functionally graded). For the examination of frequency retaliation, the article considers the accurate spot of neutral axis. This article aims to enhance the coherence of proposed model to accurately encapsulate the significant effects of the nonlocal stress field, size effects together with material length scale parameters. These considered parameters are assimilated through what are referred to as modified couple stress as well as nonlocal elasticity theories, which encompasses the stiffness-hardening and softening influence on the nanobeams frequency characteristics. Power-law distribution is followed by the functional gradation of the material across the beam width in the considered structure of the article. Following the well-known Hamilton's principle, fundamental basic equations alongside their correlated boundary conditions are solved analytically. Validation of the study is also done with published result. Distinct parameters (such as surface energy, slenderness ratio, as nonlocal material length scale and power-law exponent) influence is depicted graphically following the boundary conditions on non-dimensional FG nanobeams frequency.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.10
• /
• pp.966-972
• /
• 2010

Damping characteristics of a Helmholtz resonator to passively control the combustion instability were investigated by linear acoustic analysis and atmospheric acoustic tests. Its orifice length and diameter were selected as the design parameters and supplied SPL(sound pressure level) effect on damping characteristics were investigated. Damping capacity is improved by decreasing the orifice length as well as by increasing the orifice diameter. Also, the results showed that the damping capacity of the resonator decreased nonlinearly about above 110 dB and instabilities in the nonlinear region were more effectively suppressed by increasing the orifice diameter.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.47-54
• /
• 1988

The growth characteristics and yield per unit area of two cultivation systems of forage, corn (Zea mays L.) monoculture and corn-cowpea (Vigna sinesis King) inter-cropping were compared and obtained follow results. 1. The two cultivation systems were not significantly different in leaf length, leaf width and length of internode with harvesting time. 2. The weight of stalk and leaves of a plant were decreased with maturity, while weight of ear was markedly increased. The patterns of relative ratio of each components was essentially same in each cultivation system. In corn monocrop., the percentages of stalk, leaf and ear at final harvesting stage were 22.9, 13.7 and 63.4, respectively. 3. Dry matter yield per unit area (33kgIlOa) of intercropped corn at yellow stage was similar to that of monocropped corn ( l,482.8kg/ 10a vs 1 ,SO8.9kg/ 10a). At ripe stage, however, the DM yield of intercrop. was higher than that of monocrop. (1,810.4kg/lOa vs 1,660.4 kg/ 1 Oa). 4. The same pattern was observed in organic matter yield.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1378-1385
• /
• 2002

The importance of direct genetic, maternal, heterosis and epistatic effects were examined on post-weaning weight, height, length, girth, fat depth and muscle (ratio of stifle to hip width) with dry and wet season gains in these traits. The breeds used were two pure breeds (Jersey and Limousin), the Limousin${\times}$Jersey $F_1$, and two backcrosses ($F_1{\times}$Jersey dams and $F_1{\times}$Limousin dams). Direct genetic effects were large (p<0.001) for all traits except for length. Jersey maternal effects were large for weight, girth, fat depth and muscle in the post-weaning wet season gains which is an evidence of the impact of Jersey dam on progeny beyond weaning. There were large heterosis effects on fat depth and muscle relative to other traits. Epistatic effects were observed for post-weaning performance in weight, girth, fat depth and muscle. There are indications that there were different genetic effects for post-weaning compared to preweaning growth traits. Thus, it could be hypothesized from this study that different quantitative trait loci (QTL) affect early and late growth in Jersey and Limousin cross cattle breeds. The follow up work will examine the different chromosomal gene effects on pre- and post-weaning growth.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.158-164
• /
• 1988

The growth characteristics and yield per unit area of two cropping systems, corn monoculture and 'wrnsoybean intercropping, were compared and the obtained results were as follows; 1.The two cultivation systems were not significantly different in leaf length, leaf width and length of internode at harvesting time. 2.The weight of stalk and the leaves of a plant were decreased with maturity, while the weight of ear was markedly increased. The patterns of relative ratio of each components were essentialy same in each cultivation systems. In corn monoculture, the percentages of stalk, leaf, and ear at final harvesting stage were 22.9, 13.7, and 63.4 and in corn-soybean intercropping, they were 21.8, 10.9, and 67.3 respectively. 3.Dry matter yield per unit area (kg/lOa) of intercropped corn at yellow stage was similar to that of monocultured corn (1, 483 kg/ 10a vs 1, 509 kg/ 10a). At ripe stage, however, the dry matter yield of intercropped plant was more than that of monocultured (1, 679 vs 1, 660 kg/ 10a). 4.The same pattern was observed in organic matter yield.