• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.7-15
• /
• 2002

The essential oil free needles, which were left after distillation of essential oil from various coniferous needles, were fermented with food waste organics in order to use as compost and roughage. Microorganisms for the fermentation were selected from domestic sources such as swine compost, bark compost, and kimchi, etc, and consisted of aerothermophilic bacteria and actinomycetes. The weight reduction ratio of food waste organics treated with the microorganisms was 90% after 30 days treatment, and the fermentation temperature was kept at approximately $45^{\circ}C$. The compost process was really slow due to chemical compounds derived from needles, and it finally took 60 days for complete compost. When 10% of needle compost was mixed with soil for radish growth, the growth indicators such as leaf length and root weight were increased compared with control, while root weight, root width, and root length were inhibited on the addition of 20% needle compost. The nutrient value and digestibility ratio of various essential oil free needles as roughage for ruminant animals were evaluated. The ratio of crude protein for essential oil free needles from Korean pine(Pinus koraiensis) was 10.02%, which was higher than those of rice straw(5.48%) and corn(9.00%). The digestibility ratios of essential oil free needles from Sawara cypress(Chamaecwaris pislfera), Korean pine(Pinus koraiensis), and Japanese Red Pine(Pinus densiflora) was 53%, 34%, 34%, respectively, indicating that those essential oil free needles were considered as excellent roughage.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.5
• /
• pp.744-752
• /
• 2000

The influence of arrangement and length of discrete ribs on heat/mass transfer and friction loss is investigated. Mass transfer experiments are conducted to obtain the detailed local heat/mass transfer information on the ribbed wall. The aspect ratio (width/height) of the duct is 2.04 and the rib height is one tenth of the duct height, such that the ratio of the rib height to hydraulic diameter is 0.0743. The ratio of rib-to-rib distance to rib height is 10. The discrete ribs were made by dividing each continuous rib into 2, 3 or 5 pieces and attached periodically to the top and the bottom walls of the duct with a parallel orientation The combined effects of rib angle and length of the discrete ribs on heat/mass transfer ae considered for the rib angles $({\alpha})\;of\;90^{\circ}\;and\;45^{\circ}$. As the number of the discrete ribs increases, the uniformity of the heat/mass transfer distributions increases. For $(\alpha})=90^{\circ}$, the heat/mass transfer enhancement with the discrete ribs is remarkable, while the heat/mass transfer performances are slightly higher than that of the transverse continuous ribs due to the accompanied high friction loss penalty. For $(\alpha})=90^{\circ}$, the average heat/mass transfer coefficients and the heat/mass transfer performances decrease slightly with the discrete ribs compared to the case of the angled continuous ribs.

• Wind and Structures
• /
• v.29 no.1
• /
• pp.75-84
• /
• 2019

A steady slot suction near the free-end leading edge of a finite-length square cylinder was used to control its aerodynamic forces and vortex-induced vibration (VIV). The freestream oncoming flow velocity ($U_{\infty}$) was from 3.8 m/s to 12.8 m/s. The width of the tested cylinder d = 40 mm and aspect ratio H/d = 5, where H was the height of the cylinder. The corresponding Reynolds number was from 10,400 to 35,000. The tested suction ratio Q, defined as the ratio of suction velocity ($U_s$) at the slot over the oncoming flow velocity at which the strongest VIV occurs ($U_{\nu}$), ranged from 0 to 3. It was found that the free-end slot suction can effectively attenuate the VIV of a cantilevered square cylinder. In the experiments, the RMS value of the VIV amplitude reduced quickly with Q increasing from 0 to 1, then kept approximately constant for $Q{\geq}1$. The maximum reduction of the VIV occurs at Q = 1, with the vibration amplitude reduced by 92%, relative to the uncontrolled case. Moreover, the overall fluctuation lift of the finite-length square cylinder was also suppressed with the maximum reduction of 87%, which occurred at Q = 1. It was interesting to discover that the free-end shear flow was sensitive to the slot suction near the leading edge. The turbulent kinetic energy (TKE) of the flow over the free end was the highest at Q = 1, which may result in the strongest mixing between the high momentum free-end shear flow and the near wake.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.675-684
• /
• 2010

The reinforced concrete members are designed to fail in flexural to lead ductile fracture. In the building structures, the failure is typically imposed on beams to prevent damages in columns. However, progression of plastic collapse mechanism may ultimately develop, a plastic hinge at the bottem end of the first floor column, which then can be subjected to shear or bond finally due to large axial force and small shear span-to-depth ratio. In this study, 10 RC column specimens failed in shear after flexural yielding was investigated to determine the factors affecting the plastic hinge length. The findings of this study showed that the most effective factor affecting the plastic hinge length was an axial force. As an axial force increase, an axial strain and a ductility ratio were decreased obviously. The test also shows the observed plastic hinge length was about 0.8~1.2d and the this result has difference compared with forward research.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.4
• /
• pp.362-372
• /
• 2000

This study was conducted to obtain the basic information on the production of high yield and qualitied yam in Andong, major yam-producing district, in Kyongbuk province, using three major Yam cultivars, such as Danma, Jangma and Alata (round type). Alata showed the longest tuber width while Jangma showed the longest tube length. Danma showed the highest tube yield at 2,123 kg/10a. Tubes of Alata had higher dry ratio than those of other cultivars, suggesting that Alata could be used as good processing materials. Characteristics of top parts, such as vine length, leaf number, and lateral vine number showed typical sigmoid curves. Tuber characteristics such as length, width and fresh weight of tuber were linearly increased as the growth period was progressed. Relative growth rate (RGR) for new tuber and stem reached the highest value at 86 DAT (days after transplanting). There were similar tendencies among the cultivars in net assimilation rate (NAR). The highest crop growth rate (CGR) was appeared at 156 DAT regardless of cultivars. In the changes of leaf area ratio (LAR), there were significant differences among three cultivars. LAR were decreased at 86, 106 and 136 DAT for Alata, Danma and Jangma, respectively. However, specific leaf weight (SLW) was greatly increased at 176 DAT, and leaf area index (LAI) was decreased at 156 DAT in all cultivars.

• Journal of Information Display
• /
• v.7 no.4
• /
• pp.21-23
• /
• 2006

We developed a 4.5" 192${\times}$64 active matrix organic light-emitting diode display on a glass using organic thin-film transistor (OTFT) switching-arrays with two transistors and a capacitor in each sub-pixel. The OTFTs has bottom contact structure with a unique gate insulator and pentacene for the active layer. The width and length of the switching OTFT is 800${\mu}m$ and lO${\mu}m$ respectively and the driving OTFT has 1200${\mu}m$ channel width with the same channel length. On/off ratio, mobility, on-current of switching OTFT and on-current of driving OTFT were $10^6,0.3{\sim}0.5$ $cm^2$/V·sec, order of 10 ${\mu}A$ and over 100 ${\mu}A$, respectively. AMOLEDs composed of the OTFT switching arrays and OLEDs made using vacuum deposition method were fabricated and driven to make moving images, successfully.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.1
• /
• pp.9-12
• /
• 2002

The agronomic characteristics and fertility of Morus tiliaefolia growing wild in Korean peninsula are as follows. The possibility of seed formation is 46∼80% and that of germination is 19∼28%. The height period of making flower is April 4-May 3, it means that is later than Morus bombycis, faster than Kaeryangppong. Green tip sprouting stage in spring is April 21∼24. This is later than Morus bombycis and faster than Kaeryangppong. The leaf has very big width and the ratio of leaf length to leaf width is 1.05. The thickness of leaf is thicker than Morous bombycis. There are a lot of matter of soluble nitrogen free, crude ash, and are little crude protein, crude fat and crude fiber in chemical contents of maturation leaf. The attitude of low cutting is spread out type and the branch is long type. The internord length is long. It is weak against cold and die-back.

• Journal of Crop Science and Biotechnology
• /
• v.10 no.4
• /
• pp.249-256
• /
• 2007

A study was conducted to observe the variation and inheritance of agronomic traits and their interrelationship in mungbean. The objective of the study was to compare agronomic traits and hardseed percentage of 268 recombinant inbred lines(RILs) developed from the cross between wild Vigna subspecies sublobata "ACC 41" with the mungbean cultivar "Berken". The RIL population and their parents were evaluated under controlled conditions in a glass house at the University of Queensland, Brisbane, Australia. The results showed significant differences among the RILs and among the parents in all traits under study. Berken had a longer flowering date and a higher seed weight per plant, but less total leaf number and pod number per plant than ACC 41. A germination test between papers revealed that ACC 41 was 100% hard-seeded and did not germinate at all, while Berken germinated up to 100%. Their RILs distributed well between 0 to 100% hardseed. Upon scarification, all hardseed germinated within seven days. Narrowsense heritability estimates of total leave number, hardseedness, pod length, and pod width were highly heritable at 89.9, 98.9, 93.7, and 93.2%, respectively. The heritability of seed weight per plant and number of seeds per plant were lower at 63.1 and 58.4%, respectively. Seed weight per plant showed positive transgressive segregation when compared with ACC 41 and a positive correlation with 100 seed weight. While the number of seeds per pod showed a negative transgressive segregation when compared with Berken and a negative correlation with pod length and pod width. The RILs gave a 1:1 segregation ratio in leaflet shape, growth habit, and growth pattern, indicating that these traits were controlled by a single dominant gene.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.28-34
• /
• 1982

This experiment was conducted to study on some morphological characteristics of rice grain and chaff with specific gravity. The size of grain was greater in grains with heavier specific gravity. Indica varieties were large in length, but short in width and thickness of grain, and was thin in grain form and small in volume of grain compared with Japonica variety. The coefficient of variability was high in grains with lower specific gravity. The accumulation of assimilation product was more influenced with width and thickness rather than length of grain. The percentage of fully ripened grain was high in small size variety. The green rice and imperfect grain showed higher distribution ratio in the lower specific gravity. The chaff of less filled grain had higher content of nitrogen and lower content of potassium and sillicate than the filled.

• Journal of Sensor Science and Technology
• /
• v.11 no.3
• /
• pp.132-137
• /
• 2002

The single crystal of $LiTaO_3$ ($x-112^{\circ}$ y) has very stable thermal characteristics in a piezoelectric transformer. In this paper, a piezoelectric transformer made of the crystal is newly designed and its operating characteristics are analyzed. The length of the transformer is determined as twice as its width for Lame'-mode because the single crystal of $LiTaO_3$ has low electro-acoustic efficiency. The electric and vibrational characteristics of the transformer is simulated by the PSpice program, and its results are compared to experimental ones. As the results, the ratio of output voltage to input shows large than 10 at 290.83[kHz], which is the frequency coupled the 2nd harmonic for length and the fundamental for width of the Lame'-mode transformer.