• Structural Engineering and Mechanics
• /
• v.54 no.3
• /
• pp.419-432
• /
• 2015

The free vibration of rotating Euler-Bernoulli beams with the thickness and/or width of the cross-section vary linearly along the length is investigated by using the Adomian modified decomposition method (AMDM). Based on the AMDM, the governing differential equation for the rotating tapered beam becomes a recursive algebraic equation. By using the boundary condition equations, the dimensionless natural frequencies and the closed form series solution of the corresponding mode shapes can be easily obtained simultaneously. The computed results for different taper ratios as well as different offset length and rotational speeds are presented in several tables and figures. The accuracy is assured from the convergence and comparison with the previous published results. It is shown that the AMDM provides an accurate and straightforward method of free vibration analysis of rotating tapered beams.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.1
• /
• pp.45-49
• /
• 2006

The present investigation was conducted to know the effects of host age on development and morphological characteristics of Nesolynx thymus, a gregarious ectopupal parasitoid of the uzi fly, Exorista bombycis, a serious en do-larval parasitoid of the silkworm, Bombyx mori L. For experimentation, 3 - 11 day-old pupae of E. bombycis were exposed to 2 day-old adults of N. thymus at $25{\pm}2^{\circ}C\;and\;60{\pm}10%$ RH. A highly significant negative correlation between host age and the following development and morphological characteristics of the parasitoid was observed: number of pupae parasitised, total adult recovery, sex ratio and recovery, longevity, body length, wing span, abdomen length, and abdomen width of females. The findings of the present study clearly demonstrate that various development and morphological parameters of N. thymus are influenced by the age of E. bombycis pupae.

• Animal Systematics, Evolution and Diversity
• /
• v.25 no.1
• /
• pp.41-47
• /
• 2009

Two ciliate species of Blepharisma were collected from the riverine wetland and mountain peak soil in Korea, Blepharisma undulans Stein, 1867 and B. steini Kahl, 1932, which are reported for the first time from Korea. The description was based on the observations of live and protargol impregnation specimens. Diagnostics of these species (Blepharisma undulans vs. B. steini) are as follows. Body length/width ratio in vivo about 6/1 vs. 2/1, shaped in spindle vs. pyriform to ellipsoid and colored in pinkish vs. reddish. Macronuclei 2 vs. 1, with 4-9 vs. 4-7 spherical micronuclei. Adoral zone of membranelles extends from anterior end to 1/3 vs. 1/2-2/3 of body length, with 47-56 vs. 33-45 adoral membranelles. The numbers of somatic kineties are 22-27 vs. 18-22.

• Ocean and Polar Research
• /
• v.42 no.4
• /
• pp.283-292
• /
• 2020

Oncaea prendeli Shmeleva, 1966 is redescribed here based on a specimen collected using a fine-mesh net in the epipelagic layer in the south sea of Jeju Island, Korea. The Korean specimen is generally similar to Mediterranean specimens in terms of morphological characteristics, but it shows a few minor differences in a slightly larger length-to-width ratio for the distal endopod segment of the antenna, a relatively shorter caudal seta IV, and additional ornamentation on the maxillule and maxilla. This species is distinguishable from the most similar congeneric species, O. tregoubovi Shmeleva, 1968, and three species of the genus Spinoncaea Böttger-Schnack, 2003 by the distal and lateral armature of the antenna, ornamentation on the female maxilliped, spine number on the endopod of leg 2, and proportional length of setae on the caudal ramus. Moreover, spine lengths on the exopods of legs 2-4 are proposed as new morphological characters for the identification of congeners. This is the first record of O. prendeli in Korean waters.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.99-100
• /
• 2002

Radial, tilting-pad proceeding bearings are applied in high speed rotating machines operating at stable small and mean loads and the peripheral speeds of proceeding reaching 150 m/s. The operation of bearing can be determined by static characteristics including the oil film pressure, temperature and viscosity distributions, minimum oil film thickness, load capacity, power loss, oil flow. The operation of 5-lobe tilted-pad proceeding bearing has been introduced at the assumption of adiabatic oil film. The oil film pressure, temperature and viscosity distributions habe received by iterative solution of the Reynolds', energy and viscosity equations. The resulting oil film force, minimum oil film thickness, power loss. oil flow, maximum oil film pressure, maximum temperature were computed for different sets of bearing geometric parameters as: bearing length to diameter ratio, pad angular length and width as well as pad relative clearance.

• Journal of Species Research
• /
• v.12 no.1
• /
• pp.27-37
• /
• 2023

Kushia zosteraphila Harris V.A. & Iwasaki, 1996 is newly collected and described from macroalgae in the intertidal region of Gijang-gun, along the southeastern coastal region of Korea. Kushia zosteraphila can be distinguished from congeners by following morphological characteristics: the length of the first dorsal seta similar with the second dorsal seta of female P5, the length to width ratio of the female caudal ramus, and the presence of a conspicuous comb on the accessory lobe of the male antennule. Although there are some minor discrepancies, the main diagnostic characteristics of the specimen from the study area are well-matched with the original description. We herein provide detailed morphological descriptions and illustrations of this species. According to a survey of the location of the reported porcellidiid species in Korea, this specimen is the second record in Korean waters of the genus Kushia. A key to species of the family Porcellidiidae in Korea is provided. A partial sequence of the mitochondrial COI gene was obtained and provided as a DNA barcode for this species.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.40-46
• /
• 2013

When impeller machining needs to be machined over a length in order to avoid interference with neighboring surfaces between material and tool, there are no databases about cutting condition according to tool slenderness ratio. So selection and machining of cutting condition depends on expert's experience. Therefore, the purpose of this paper is deciding cutting condition in roughing and finishing process of impeller according to slenderness ratio of AL7075's end-mill that is the most commonly used for impeller. We have tested for about relation between Slenderness ration and fluctuation width of the cutting force, surface roughness and depth of cut ratio to observe cutting characteristics according to slenderness ratio. The experiments of cutting characteristics and processing criteria are compared with AL5052 which is existing information.

• Steel and Composite Structures
• /
• v.11 no.6
• /
• pp.469-488
• /
• 2011

This paper consists of two parts; the first part describes the laboratory work concerning the behavior of lightweight aggregate concrete filled steel tubes (LACFT). Based on eccentricity tests, fifty-four specimens with different slenderness ratios (L/D= 3, 7, and 14) were tested. The main parameters varied in the test are: load eccentricity; steel ratio; and slenderness ratio. The standard load-strain curves of LACFT columns under eccentric loading were summarized and significant parameters affecting LACFT column's bearing capacity, failure mechanism and failure mode such as confinement effect and bond strength were all studied and analyzed through the comparison with predicted strength of concrete filled steel tube columns (CFT) using the existing codes such as AISC-LRFD (1999), CHN DBJ 13-51-2003 (2003) and CHN CECS 28:90 (1990). The second part of this paper presents the results of parametric study and introduces a practical and accurate method for determination of the maximum compressive strength of confined concrete core ($f_{max}$), In addition to, the study of the effect of aspect-ratio and length-width ratio on the yield stress of steel tubes ( $f_{sy}$) under biaxial state of stress in CFT columns and the effect of these two factors on the ultimate load carrying capacity of axially loaded CFT/LACFT columns.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.40-45
• /
• 2009

The experiment has investigated the effects of growth, yield, fruit quality and cation absorption of strawberry 'Akihime' in different $NO_3-N:NH_4-N$ ratio in nutrient solution. $NO_3-N:NH_4-N$ ratios were 5.5:0, 4.0:1.5 and $3.0:2.5me{\cdot}L^{-1}$. As the ratio of $NH_4-N$ increased, pH was decreased by $5.0{\sim}6.0$ and EC sustained $0.8{\sim}1.0dS{\cdot}m^{-1}$ during experiment. Though in high $NH_4-N$ ratio of $3.0:2.5me{\cdot}L^{-1}$, the absorption of cations(K, Ca and Mg) was not inhibited. Treatment in contained $NH_4-N$ showed a tendency of increasing of petiole length and leaf width. The fruit length, fruit width, fruit weight and soluble solids were not significantly different. Yield per plant was lowest in $4.0:1.5\;me{\cdot}L^{-1}$, of $NO_3-N:NH_4-N$ ratio. Malformation fruit has not shown during the whole growth period.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.517-524
• /
• 2018

This study using a method different from those employed previously, the anatomical characteristics of paper-mulberry wood were confirmed by observing three different sections. In addition, the factors affecting the pulp and papermaking processes were analyzed in terms of morphological properties such as the fiber length and width, lumen width, and chemical composition of the paper-mulberry bast fiber. The anatomical characteristics of the paper-mulberry wood were a ring porous or semi-ring porous structure with the vessels showing solitary pore and radial array. The medullary ray of the tangential section showed 1-3 rows and common helical thickening. Consequently, the paper-mulberry wood has the same anatomical characteristics throughout. The morphological characteristics of the paper-mulberry bast fiber are a fiber length of 6.58 to 9.01 mm, fiber width of 15.85 to $27.80{\mu}m$, lumen width of 4.50 to $12.54{\mu}m$. The D sample of Gangwon was the most suitable for the pulp and papermaking processes, in terms of its derived morphological ratios. Comparing the chemical compositions, the C sample of Gyeongsang had a high holocellulose content (90%). Thus, the findings herein will aid in determining the quality of Korean paper post production.