• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.475-482
• /
• 2011

This study, a basic study to improve aerodynamic characteristic of a wind blade, explored through CFD how much the lift to drag ratio improves according to the shape of groove formed on the surface of airfoil NACA0015. This study found out that the ratio improves by 8.7% when the ratio between boundary layer(${\delta}$) and the depth of groove(h), the ratio between the depth of groove(h) and the width of groove(d) and the ratio between the length(p) from one groove to the other and the width of groove are 1.1, 0.1 and 1.2 respectively. The number of grooves is two. It was also confirmed that the improvement of the lift to drag ratio is maintained after certain angle of attack.

• Korean journal of applied entomology
• /
• v.49 no.1
• /
• pp.11-16
• /
• 2010

Measurements were made on morphology of each developmental stages of the chestnut weevil, Curculio sikkimensis, reared in the laboratory and field from 2003 to 2006. The size of egg was 0.8${\pm}$0.03 mm. The escaping larvae were measured, in average, as 98 mg in body weight, 10.65 and 3.99 mm in body length and width, and 1.70 mm in head width. Pupal size of female and male was 7.01 and 6.53 mm, respectively. The fresh weight (0.343 g), body length (7.76 mm) and width (3.38 mm), and head width (1.60 mm) of female adults were significantly bigger than those (0.268 g, 7.14 mm, 3.01 mm and 1.37 mm, respectively) of male adults. Proboscis length (6.53 mm) and antennal length (5.47 mm) of female was also significantly longer than those (3.56 and 4.63 mm, respectively) of male. The larvae of C. sikkimensis overwintered for 1~3 years and their body weight, body length, and body width were decreased. The ratio between proboscis length and body length, the basipodite position attached to the proboscis, and shape of the sex organ on the abdominal end could be used to discriminate sexes.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.62-65
• /
• 2010

This study was carried out to estimate the size and exine pattern of pollen grains in seven species of the genus Lilium by using scanning electron microscope. Exine of pollen grains, which were all monad, took the prolate forms with a pollen aperture. However, there were various L/W ratio between length (L) and width (W) of pollen grains among selected Lilium species. The pollen of L. distichum was oblong shape which had the highest L/W ratio of 2.59. On the other hand, that of L. concolor var. partheneion was broadly elliptical shape close to circle which had the lowest L/W ratio of 1.82. The surface patterns of exine were reticulate in all Lilium species that have showed diverse forms in their lumina. Pollen length and width in L. lancifolium had the greatest value, 115.90 and $46.54{\mu}m$, respectively, in comparison with those of L. tsingtauense, 70.33 and $38.72{\mu}m$, respectively. Except L. distichum and L. leichtlinii var. maximowiczii which had a similar pollen length within standard errors, the others in Lilium species showed different sizes, respectively. Therefore, these results indicated that pollen length could be a better standard for the classification of Lilium species than exine surface patterns or pollen dissection area.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.505-508
• /
• 2006

Self-heating induced device degradation and its width/length (W/L) dimension dependence were studied in p-type polycrystalline silicon (poly-Si) thin film transistors (TFTs). Negative channel conductance was observed under high power region of output curve, which was mainly caused by hole trapping into gate oxide and also by trap state generation by self-heating effect. Self-heating effect became aggravated as W/L ratio was increased, which was understood by the differences in heat dissipation capability. By reducing applied power density normalized to TFT area, self-heating induced degradation could be reduced.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.241-245
• /
• 2002

Dual-band microstrip antenna is designed for industrial-scientific-medical(ISM) band of 2.4㎓ and 5.8㎓ using finite-difference time-domain method(FDTD). Cross Patch fed by aperture in the ground plane of microstrip line is proposed as radiation element of antenna, which is 2 rectangular Patch is overlapped. To design antenna, change of input impedance by aperture and stub length change is examined. And it is investigated that center frequency and -10 ㏈ bandwidth by Length of radiation element and width change. Experimental result about reflection Loss confirmed that agree well with analysis results of FDTD and IE3D, And -3 ㏈ beam width, front to back ratio and gain in frequency 2.43㎓ and 5.79㎓ is presented by measuring radiation Pattern of antenna.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.3
• /
• pp.123-130
• /
• 1997

We determine the dispersion profile of a dispersion decreasing fiber(DDF) for optimum pulse compression from a trade-off between high pulse compression and low pedestal power/short DDF length. We find that the optimum vlaue of the exponential dispersion decreasing factor .alpha. is 0.95 and that the corresponding optimum fiber length is 1.5 times of the initial soliton period. Passing through the dDF, ~10 times of pulse comparession ratio can be achieved without significant increase in pedestal power. To compress relatively broad pulses using a given DDF optimized at a specific pulse width, we also detemrine the optimum input pulse amplitude, as a function of input pulse width.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.10
• /
• pp.433-437
• /
• 2005

This paper studied Rotary type ultrasonic motor which has cross type stator. The stator consists of hollowed cross type metal which has four piezoelectric ceramics on the ends of cross bars. When two harmonic voltages which have 90$^{\circ}$ phase difference given to ceramics, the elliptical motion was generated in the inside tips. Inside tips are contact with rotor and these elliptical motions are rotate the rotor The finite element analysis was used to optimize the dimension and displacement of the stator. And the analyzed results were compared with the experimental results of the motor. As results, the speed and the torque of motor was increased by increasing width of the cross bar. And the speed and torque o( motor was not influenced to length of cross bar. The speed and torque was linearly increased by increasing voltage. The maximum torque was generated when the motor fabricated length of cross bar and width of ceramics in the ratio of 1:2.

• Journal of Digital Contents Society
• /
• v.10 no.3
• /
• pp.389-393
• /
• 2009

In this paper, the single patch microstrip antenna and gap coupled broadband microstrip patch antenna using FDTD(Finite Difference Time Domain method) are analyzed. Mur's 2nd absorbing boundary condition to minimize reflected wave is applied. Return loss, voltage standing wave ratio, and input impedance by the length and width of driving patch, the length and width of parasitic patch, and the distance between driving patch and parasitic patch have been analyzed. Design parameters and radiation patterns of broadband antenna have been also shown.

• Journal of Species Research
• /
• v.12 no.4
• /
• pp.313-320
• /
• 2023

Diatoms are unicellular eukaryotic microalgae, and they are highly diversified in aquatic environments. We describe an unrecorded diatom species Fragilaria saxoplanctonica Lange-Bertalot & Ulrich (Bacillariophyceae) collected from Paldang Reservoir, Korea, on 4 April 2022. The valve was needle shaped and narrowly rectangular, its ends were rounded, and no spines were found on the outline of their valves. The valve was 67.2-70.2㎛ in length and 1.4-2.9㎛ in width. The ratio of width-to-length was 1 : 23.2-50.1. The pattern of striation was alternate or opposite, and the number of striae in 10㎛ was 24-26. Molecular comparisons of the 18S rDNA and rbcL sequences showed that it belonged to the genus Fragilaria. These morphological and phylogenetic results confirmed that our species was F. saxoplanctonica, and it was the first record in Korea.

• Journal of the Korean Society of Costume
• /
• v.57 no.5 s.114
• /
• pp.1-11
• /
• 2007

The purpose of this study was to analyze and minimize structural error between sample knitting and actual knitting in weft knitting apparel. Basic stitches used in this study were plain stitch, $0{\times}0$ rib stitch, $1{\times}1$ rib stitch, $2{\times}2$ rib stitch, Milan rib stitch. They were knitted into two different gauges(7 and 12 gauge) and 6 different sample sizes by computer program. The weight, length and width of these 5 basic knitting stitches were measured and their changes according to gauge, stitch and knitting were calculated and analyzed. The results were as follows; The weight of $0{\times}0$ rib stitch was the largest, followed by Milan rib stitch, $2{\times}2$ rib stitch, plain stitch and $1{\times}1$ rib stitch. As the density of stitch per unit area increases, the weight increases. The length of $0{\times}0$ rib stitch was the largest, followed by plain stitch, $2{\times}2$ rib stitch, $1{\times}1$ rib stitch and Milan stitch in both 7 and 12 gauge. As the number of course increases, the length increases accordingly. However, its increase ratio shows higher than that of number of course. It means that the reduction in number of course is needed to get aimed length. The width of Milan rib stitch was the largest, followed by $0{\times}0$ rib stitch, plain stitch, $2{\times}2$ rib stitch, $1{\times}1$ rib stitch in 7 gauge. In 12 gauge, Milan stitch, plain stitch and $0{\times}0$ rib stitch were the highest, followed by $2{\times}2$ rib stitch and $1{\times}1$ rib stitch. It showed that the change in shape of stitch influenced on the width more than the length of stitch.