• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.711-720
• /
• 2009

Leaf fibers have many good properties; they are strong, long, cheap, abundant and bio-degradable. Since they, however, contain a great quantity of non-cellulose components, they have been used for the materials of mats, ropes, bags and nets rather than those of clothing. In this study, we investigated the characteristics of leaf fibers in order to promote the use of leaf fibers for the materials of clothing as well as develop the high value-added textile fibers. Leaf fiber plants including New Zealand Flax, Henequen and Banana plant, which have various nature and shape, were used. New Zealand Flax and Henequen leaves were cut from lower part of plants. Banana leaves and pseudo-stems were peeled and cut from the stem of Banana plants. First, the thin outer skins like film of leaves, veins and stems were removed before retting. The chemical retting had been processed for 1hour, at 100 in 0.4% $H_2SO_4$ aqueous solution(liquid ratio 50:1). Then, the retted leaf fibers had been soaked for 1hour, at room temperature in 0.5% NaClO solution(v/v) to remove the miscellaneous materials. We investigated the physical characteristics of three leaf fibers including the transversal and longitudinal morphology, the contents(%) of pectin, lignin and hemicellulose, the length and diameter of fibers, the tensile strength of the fiber bundles, and the fiber crystallinity and the moisture regain(%). The lengths of fiber from three leaf fibers were similar to their leaf lengths. The fiber bundles were composed of the cellulose paralleled to the fiber axis and the non-cellulose intersecting at right angle with the fiber axis. The diameters of New Zealand Flax, Henequen and Banana fibers were $25.13{\mu}m$, $18.16{\mu}m$ and $14.01{\mu}m$, respectively and their tensile strengths were 19.40 Mpa, 32.16 Mpa and 8.45 Mpa, respective. The non-cellulose contents of three leaf fibers were relatively as high as 40%. If the non-cellulose contents of leaf fibers might be controlled, leaf fibers could be used for the materials of textile fiber, non-wovens and Korean traditional paper, Hanjee.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.116-122
• /
• 2021

This study quantitatively evaluated the performance improvement of a circular reinforced concrete pier under dynamic load with strengthening using a steel plate. Various three-dimensional elements were applied using the finite element program ABAQUS. The analytical parameters included the ratios of the steel cover length to the pier's total height and the ratios of the steel cover thickness to the pier diameter for inelastic-nonlinear analysis. The lower part of the pier had fixed boundary conditions, and lateral repetitive loads were applied at the top of the pier. The pier was investigated to evaluate the dynamic performance based on the load-displacement curve, stress-strain curve, ductility, energy absorption capability, and energy ratio. The yield and ultimate loads of piers with steel covers increased by 3.76 times, and the energy absorption capability increased by 4 times due to the confinement effects caused by the steel plate. A plastic hinge part of the column with a steel plate improved the ductility, and the thicker the steel plate was, the greater the energy absorption capacity. This study shows that the reinforced pier should be improved in terms of the seismic performance.

• Composites Research
• /
• v.34 no.3
• /
• pp.155-160
• /
• 2021

Metamaterials are complexes of elements that can create properties not found in naturally occurring materials, such as changing the direction of forces, creating negative stiffness, or altering vibration and impact properties. In the case of wood pile metamaterials that are easy to manufacture and have excellent performance in reducing vibration and shock in the vertical direction, basic research on variables affecting shock transmission is needed to reduce shock. Although research on impact reduction according to geometrical factors is being conducted recently, studies on the effect of material variables on impact reduction are insufficient. In this paper, finite element analysis was carried out by variablizing the geometrical properties (lamination angle, diameter, length) and material properties (modulus of elasticity, specific gravity, Poisson's ratio) of wood pile cylinders. Through finite element analysis, the shape of the wooden pile cylinder delivering impact was confirmed, and the effect of each variable on the reduction of impact force and energy was considered through main effect diagram analysis, and frequency band analysis was performed through fast Fourier transform. proceeded In order to reduce the impact force and vibration, it was found that the variables affecting the contact area of t he cylinder have a significant effect.

• Analytical Science and Technology
• /
• v.19 no.5
• /
• pp.369-375
• /
• 2006

Calibration gas mixtures were prepared using dynamic volumetric method according to ISO 6145-5 and the uncertainty was evaluated. Ten identical capillaries with 0.25 mm in inner diameter and 50 cm in length were applied in this system. Dilution ratio of parent gas was determined by the number of capillaries that passes parent gas and that passes balance gas through. Capillaries were made of Teflon which had good chemical stability against adsorption of gaseous substances. Mechanical valves were introduced in this system in order to minimize the thermal effect of solenoid valves. Concentration of prepared gases were compared with master grade standard gases in cylinders made by RiGAS Co. and calibration of the instrument were completed using comparison method according to ISO 6143. Experimental results showed that the coefficient of variance of diluted oxygen standard gases showed less then 0.2% in most dilution range, that of diluted hydrogen sulfide standard gases showed less then 1.0%. Therefore, it is proven that the standard gases prepared by this system are appropriate to be used as a calibration standards in ambient monitoring, etc.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.295-301
• /
• 2023

This study was conducted to determine the optimal dipping time and concentration of gibberellin for improving the growth and quality of domestic cultivar 'Seolhyang' strawberry when using runner plants. Strawberry runner plants were collected on November 10th and soaked in GA₃ concentrations of 50, 100, and 150 mg·L^-1 for 30 and 60 minutes, respectively. After 75 days of planting, the growth results showed that in the 30-minute, 50 mg·L^-1 treatment, the crown diameter was thicker and the T/R ratio was lower, indicating better plant vitality. Runner length increased with lower gibberellin concentrations, particularly promoting vegetative growth. Photosynthetic efficiency was more influenced by gibberellin concentration than dipping time, and using concentrations above a certain threshold acted as a stress factor for runner plants, leading to decreased photosynthetic efficiency. For enhancing seedling growth, soaking with 50 mg·L^-1 of gibberellin for 30 minutes was found to be optimal. This study verified the effects of gibberellin treatment on strawberry runner plants to improve plant growth and quality, providing useful basic data for using gibberellin.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.554-558
• /
• 2011

A single cross hybrid, 'Eolrukchal 1', is a bicolor waxy corn (Zea mays L.) developed by the maize breeding team at the National Institute of Crop Science (NICS), RDA in 2007. This hybrid, which has a high eating quality, was produced by crossing two inbred lines, KBW23 and KW33. KBW23 was a seed parent and KW33 was a the pollen parent of 'Eolrukchal 1'. Ear length and diameter of 'Eolrukchal 1' is 18.4 cm and 4.5 cm, respectively. The ratio of kernel set length/ear length is 89%, similar with that of a check hybrid, 'Chalok 1'. It is resistant to Exserohilum turcicum (Northern corn leaf blight) and its lodging resistance is higher than that of 'Chalok 1'. The yield of 'Eolrukchal 1' in fresh ear weight was 9.80 ton/ha and 14% higher than that of 'Chalok 1' in regional yield trials (RYT) from 2005 to 2007. A seed production of this hybrid has been well due to good match during crossing between the seed and the pollen parents. It is adaptable to the whole country except Jeju-do.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1011-1016
• /
• 1999

This study was performed to search a physical method having high yield and quality and minimum environmental pollution for extraction of pectin from apple pomace. Based on the physical solubilization of plant cell wall under the condition of high temperature, pressure and shearing stress, apple pomace was treated by a corotating intermeshing type twin-screw extruder with the diameter-to-length ratio of 1/20. The specific mechanical energy of extruder was introduced as system parameter for extrusion process modeling and the shaft speed, feed rate and moisture content as process variables. The yield, average molecular weight and galacturonic acid content of water-soluble polysaccharides obtained by extrusion were, respectively, modeled with the linear functions of the system parameter which was of the form as a linear function of process variables. The specific mechanical energy increased with increase of shaft speed and with decrease of feed rate and moisture content. Out of process variables, moisture content had the greatest effect on specific mechanical energy. The yield increased with increase of specific mechanical energy while the average molecular weight and galacturonic acid content increased with its decrease. In aspects of yield and quality of pectin, the results from this study showed the possibility to replace a traditional acidic method with the extrusion treatment of this study.

• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.262-265
• /
• 2015

This study was carried out to investigated optimum mixing ratio of Korean cultivation Salvia miltiorrhiza for production of functional oyster mushroom. Mycerial growth was slow at addition of Salvia miltiorrhiza, and significant difference by increase of Salvia miltiorrhiza. Yields of fruiting body show the highest to 139.5 g/850 ml of medium which are addition 5 g/bottle of Salvia miltiorrhiza but rapid decrease by increase of Salvia miltiorrhiza. Diameter of pileus and thick of stipes were higher at addition Salvia miltiorrhiza than those of the controls. Thick of pileus and length of stipes were the highest at addition 30g, and 20 g and 30 g of Salvia miltiorrhiza. The L value of stipes were the highest at addition 20 g and 50 g of Salvia miltiorrhiza and the L value of pileus were the highest at addition 30 g of Salvia miltiorrhiza, but there was no significant difference in the a-value and the b-value.

• Korean Journal of Ichthyology
• /
• v.28 no.4
• /
• pp.239-248
• /
• 2016

The habitat, age and spawning characteristics of the Korean eastern spined loach, Iksookimia yongdokensis, were investigated to obtain baseline data for its ecological characteristics in the Chuksancheon (stream), Yeongdeok-gun, Gyeongsangbuk-do, Korea. The difference between the habitats of juveniles (0+) and 1~4 year old loaches was that juveniles mainly inhabited sandy bottoms (substratum particle size $0.6{\pm}1.44\;cm$) with very slow velocities of water current ($2.4{\pm}2.09\;cm/sec$) and low depths ($29.2{\pm}7.57\;cm$), whereas 1~4 year old loaches inhabited pebble and cobble bottoms (substratum particle size 5.5~6.1 cm) with relatively fast velocities of water current (3.8~4.6 cm/sec) and deep depths (50~70 cm). The age groups for I. yongdokensis (female) estimated by the frequency distribution of total length in the spawning season (July) indicated that the 35~64 mm is 1-year old, the 65~94 mm group is 2-year old, the 95~119 mm is 3-year old, and the 120~145 mm is more than 4-year old. The sex ratio (♂/♀) was 0.69, and females were 10~30 mm larger than males. The lamina circularis at the base of the pectoral fins in males, a secondary sexual characteristic, formed at the 13th month after hatching. The spawning season according to the gonadosomatic index (GSI) was June to July with water temperatures of $20{\sim}25^{\circ}C$. The average number of eggs was $2,292{\pm}618$, with a diameter of $1.46{\pm}0.02\;mm$ for mature eggs.

• Journal of Bio-Environment Control
• /
• v.10 no.1
• /
• pp.30-35
• /
• 2001

This experiment was undertaken to investigate the effect of root zone temperature during the night on absorption of mineral nutrients, growth, and fruit yield of the truss-limited hydroponic tomatoes in winter. The root zone temperature was either controlled to 10, 15, 20, $25^{\circ}C$, or left uncontrolled at ambient temperatures. Temperature of the covered beds rose as root zone temperature was raised, but it in all treatments was less than 3$^{\circ}C$ higher than that in the control. Raising root zone temperature, except $25^{\circ}C$, showed positive effect on plant height, leaf length, stem diameter, and plant fresh and dry weight, but not on T/R ratio which was the greatest in the control. Root activity in all treatments except $25^{\circ}C$ increased as compared to the control. Mean fruit weight, fruit count per plant, and fruit yield were the greatest in 2$0^{\circ}C$ treatment. Root zone temperature did not significantly affect the contents of total nitrate and magnesium in leaves, stems and roots. Concentrations of phosphate and calcium increased in leaves and stems, but decreased in roots as root zone temperature increased. Overall, 2$0^{\circ}C$ treatment gave the greatest growth and energy efficiency.