• The Journal of Advanced Prosthodontics
• /
• 제15권3호
• /
• pp.101-113
• /
• 2023

PURPOSE. This randomized controlled trial aimed to evaluate the effect of implants' two different diameters and cantilever lengths on the marginal bone loss and stability of mplants supporting maxillary prostheses. MATERIALS AND METHODS. Ninety-six implants were placed in sixteen completely edentulous maxillary ridges. Patients were randomly divided into two groups: Group A, implants were placed with a cantilever to anterior-posterior AP spread length (CL:AP) at a ratio of 1:3; Group B, implants were placed with a CL:AP at a ratio of 1:2. Patients were further divided into four sub-groups: Groups A1, A2, B1, and B2. Groups A1 and B1 received small diameter implants while Groups A2 and B2 received standard diameter implants. Bone height and stability measurements around each implant were performed at 0, 4, 8 and 24 months after definitive prostheses delivery. RESULTS. Statistical analysis of the mean implant stability and height values revealed an insignificant difference between Group A1 and Group A2 at all the different time intervals while significantly higher values in Group B1 in comparison with Group B2. Results also showed significantly higher values in Group A1 in comparison with Group B1 and an insignificant difference between Group A2 and Group B2 at all the different time intervals. CONCLUSION. It can be concluded that the use of small diameter implants placed with a CL:AP at a ratio of 1:3 provided predictable results and that the 1:2 CL:AP significantly induced more critical bone loss in the small diameter implants group, which can significantly reduce long term success and survival of implants

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.831-838
• /
• 2004

To study on mechanical characteristics of weathered granite masses are difficult because of undisturbanced sampling and in-situ test. Generally, pressuremeter test is widely used to investigate the behavior of weathered rock masses. However, it has many problems to get a limit pressure because of cavity collapse, membrane damage, ete. This study aims to evaluate the mechanical characteristics of weathered granite masses using in-situ pressuremeter test and numerical analysis depending on the ratio of length and diameter of the membrane(L/D=5, 8, 10, 15, 20). Test results and data are shown that strength parameters are reduced exponentially varing weathering degree, and numerical analysis results are approximately coincided with the test results. And the ratio of length and diameter of the membrane arc not affected the parameters such as modulus of pressuremeter, shear modulus, etc. But limit pressure is increased decreasing membrane length based on numerical analysis. On the other hand, increasing the membrane length, yield pressure is decreased and plastic radius is increased in the case of same weathering degree.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.555-558
• /
• 2010

본 논문에서는 직경 대 길이비(L/D ratio)의 값이 큰 composite 추진제를 사용하는 고체 추진기관 설계에 대하여 서술하였다. 큰 직경 대 길이비를 갖는 고체 추진기관은 침식연소와 축방향 연소 불안정성이 나타날 수 있는 요인이 크다. 특히 침식연소는 별 모양 그레인을 갖는 추진기관에서 초기 압력의 상승을 지속시키는 역할을 할 수 있다. 따라서 이를 고려한 그레인, 내탄도 및 연소관에 대한 구조적인 해석을 통해 설계를 수행하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.471-472
• /
• 2006

High aspect ratio of nano hairs on a plastic substrate is molded using thermoplstic materials including COC, PP, PC and PMMA. As a template for molding nano hairs, AAO membrane is adopted, which is 60um thick and 13mm in diameter. This membrane has about 109 of through-holes of which diameter is around 200nm. This AAO membrane and the pellet of materials are stacked in the mold and pressed to mold after heating up to be melted. The AAO membrane is removed using KOH to obtain the molded nano hairs. As a result, the diameter of the molded hairs is around 200nm and the length is $2um{\sim}60um$ depending on the molding conditions and materials.

• 한국항공우주학회지
• /
• 제47권12호
• /
• pp.904-912
• /
• 2019

본 연구는 항공기에 근접하여 폭발하는 고폭형 위협 무기의 파편 발사속도 및 발사각을 수치 해석적으로 추정한 결과이다. 고폭형 위협 무기에 대한 항공기의 취약성을 평가하기 위하여 탄두 구성품의 물리량을 이해하는 것은 매우 중요하다. 일반적으로 고폭형 위협 무기에 대한 구성품의 질량, 길이 및 직경 등 물리적 변수는 알려져 있지 않다. Terrier, Sparrow 등 유사 위협 무기들의 데이터를 이용하여 charge to mass 비율, 길이와 직경 비율 등과 관련된 경험식을 수치 해석적으로 유도하였다. 근접신관에 의하여 외부에 폭발하는 탄두에서 탄두 덮개 구성비는 20% 수준으로 나타났으며, 고폭 화약의 양쪽 끝부분에서 방사되는 파편의 발사속도 구배 현상이 뚜렷이 나타났지만 법선 방향에 대한 발사각은 6° 이내로 나타났다.

• Ocean and Polar Research
• /
• 제26권4호
• /
• pp.679-684
• /
• 2004

To determine if Antarctic krill employ body shrinkage as one of its overwintering mechanisms in the field, Euphauia superba and Euphausia crystallorophias were collected during fall and winter in and around Marguerite Bay through US Southern Ocean GLOBEC field programs during fall and winter 2001 and 2002. The relationships between the body length and weight of both krill species were exponentially correlated with no significant differences between the two species (p>0.05). The ratio between eye diameter and body length of individual krill was examined in an expectation that it could be used as an indicator of the body shrinkage as previously suggested by Shin and Nicol (2002). These ratios were significantly different between the two krill species. Especially, E . crystallorophias had bigger eyes than E. superba. In both krill species, eye diameters were highly correlated with body lengths (regression coefficients ${\geq}0.70$). For E. crystallorophias, no significant differences of the ratio of eye diameter/body length were detected between fall and winter. Even though the ratios for E. superba were seasonally varied, it was not clear whether body shrinkage was an actual and critical overwintering mechanism for the krill population found in this study area. These results suggest that some individuals of E. superba might experience the body shrinkage during a part of their liff, but this morphological index alone (eye diameter/body length) may be insufficient to unambiguously separate the shrunk krill from the non-shrunk ones in the field-collected animals.

• 한국안전학회지
• /
• 제11권2호
• /
• pp.89-95
• /
• 1996

To predict the service life of an organic vapor respirator cartridge, the breakthrough curve of respirator was simulated using a fixed-bed adsorption model and compared with that of sampling tube. And the effects of bed porosity, length to diameter ratio and flow rate of the sampling tube were studied. The life time of respirator cartridge was increased with the decrease of particle size and bed porosity. And the breakthrough time of sampling tube was affected by the flow rate, however not by the length to diameter ratio. The 10% breakthrough time of the sampling tube was corresponded with that of cartridge.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.51-56
• /
• 2003

The goal of this study is to show the way to decrease the noise from air nozzles. The variables of this test are the shapes of air nozzles, air flow rate and the distance between a reflection plate and a nozzle tip. This experiment is aimed to find the most appropriate condition to minimize the noise. These are the results. If diameter ratio is more than 12:8, noise level increases by over 10 dB(A) regradless of the distance between a reflection plate and a nozzle and the existence of a reflection plate. And when $L_2$ of a nozzle is 5mm long, noise level rise relatively highly. So, it is strongly recommended that $L_2$ should be manufactured more than 10mm. The reason for a high intensity noise is that when diameter ratio is more than 12:8, the diameter of a nozzle tip($D_2$) turns small drastically, which increases the air velocity. It is assumed that when the vortes is great around the spots where a nozzle hole is suddenly smaller, great turbulent flow increases much noise.

• 동력기계공학회지
• /
• 제4권3호
• /
• pp.34-39
• /
• 2000

Performance data in the literature on air lift pumps have been based primarily on pumps of long length and large diameter (high lift pumps). Since mariculture operations involve pumps of relatively short length and small diameter, performance data are required for efficient operation. To provide such data, an experimental apparatus was designed and fabricated to test all lift pumps from 2.1 to 3.4 cm inside diameter and from 40 to 300 cm in length. Instrumentation was provided to measure water flow rate and air flow rate as well as water temperature, air temperature, and pressure throughout the system. Results from this study correlate well with high lift pump data in that, for a given pump geometry, maximum water flow occurs for a specific air flow rate. Driving the pump with air flows larger or smaller than this optimum flow rate will decrease the pumping rate. The optimum flows are significantly different for low lift pumps compared to high lift pumps. However, the pumping rate for low lift pumps approaches that for high lift pumps with increasing length.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권1호
• /
• pp.13-18
• /
• 2006

Two different animal models, which differ in whether or not taking maternal genetic effect into account, for estimating genetic parameters of cashmere weight, live body weight, cashmere thickness, staple length, fiber diameter, and fiber length in Inner Mongolia White Cashmere Goat were compared via likelihood ratio test. The results indicate that maternal genetic effect has significant influence on live body weight and cashmere thickness, but no significant influence on the other traits. Using models suitable for each trait, both genetic parameters and trends were analyzed with the MTDFREML program. Heritability estimates from single trait models for cashmere weight, live body weight, cashmere thickness, staple length, fiber diameter and fiber length were found to be 0.30, 0.07, 0.21, 0.29, 0.28 and 0.21, respectively. Genetic correlation estimates from two-trait models between live body weight and all other traits (-0.06~0.07) was negligible, as were those between fiber diameter and all other traits (-0.01~0.03) except cashmere thickness (0.19). Cashmere weight and staple length had moderate to low genetic correlations with other traits (-0.24~0.39 and -0.24~0.34, respectively) except for live body weight and fiber diameter. Cashmere thickness had a strong genetic correlation with fiber length (0.81), and low genetic correlation with other traits (0.19~0.34) except live body weight. Genetic trend analysis suggests that selection for cashmere weight was very effective, which has led to the slow genetic progress of cashmere thickness and fiber length due to their genetic correlations with cashmere weight. The selection for live body weight was not effective, which was consistent with its low inheritability.