• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.201-204
• /
• 1999

Polarization mode dispersion (PMD) restrict the bend-width of single mode optical filer, and it is important parameter in the optical fiber having long-length. Although fiber has perfect circular symmetry, fiber bending, twisting and laws governing manufacture cause additional Polarization mode dispersion. The effect of polarization mode dispersion in general single mode fiber of long length is discussed in this paper. Measurement of PMD with random mode coupling were conducted in two kind of fibers using different laws governing manufacture and interferometric method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.157-158
• /
• 2017

This tests examined bond stress-slip relationship of V-ties embedded into concrete as a supplementary lateral reinforcement proposed for ductility of concrete flexural members. The different leg shapes of V-ties were prepared as a test parameter. The V-tie with pressed end-legs exhibited 28% higher bond strength than the conventional V-ties, whereas bond stress-slip curves were insignificantly affected by the embedment length of V-ties.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.4
• /
• pp.21-27
• /
• 2007

The multiplication equipment of marine products with artificial upwelling structures could be useful in the fishing grounds near coastal areas. Artificial upwelling structures could move the inorganic nutrients from the bottom to the surface. Artificial upwelling structures have been used to improve the productivity of fishing grounds. Until now, research on artificial upwelling structures has been related to the distribution of the upwelling region, upwelling structures, and the marine environment. However, little work on the optimum design of the rubber-mound artificial upwelling structures has been done to increase the efficiency of drawing up the inorganic nutrients. This study investigated the optimum cross-section of rubber-mound artificial upwelling structures by means of hydraulic experiments. The hydraulic experiments include the falling test of rubber. Based on the results of the falling test, the relationship between the length of the rubber mound and water velocity, and the relationship between the shape of the rubber and the stratification parameter were established. In addition, the effect of the void ratio of various artificial structures on the stratification parameter was studied. From the experiment, it was found that upwelling could be enhanced when the ratio of structure height to water depth was 0.3 and stratification parameter was 3.0. The upwelling was not improved when the void ratio exceeded 0.43. The optimum size of rubber mounds was determined when the incident velocity was influenced by the mean horizontal length rather than size of block.

• Journal of Veterinary Clinics
• /
• v.34 no.3
• /
• pp.189-192
• /
• 2017

Thirteen dogs were diagnosed as congenital extrahepatic single PSS by intraoperative mesenteric portovenography or computed tomographic examination, repair surgery was performed by using an ameroid constrictor. Hepatic size was measured from the right lateral view using liver length/T11 length ratio. This measurement was performed on follow-up check of PSS ligation patients. Hepatic size parameter of pre-operative PSS patients is $4.13{\pm}0.13$ (range, 3.11-4.83). After surgery, hepatic size parameter of post-operative PSS patients is $4.79{\pm}0.19$ (range, 3.78- 5.93). Although follow-up periods varied 2 and 26 weeks, all patients showed increased liver size compared to that on pre-operative radiographs (P < 0.01). The increase rate was 1.01-1.46 times than those of preoperative radiographs. But in 5 patients, post hepatic liver size was small compared to the others, which showed low increase rate of body weight, total protein, albumin, and glucose level. It was thought that small value of hepatic size parameter was due to delay of hepatic regeneration. In conclusion, radiographic hepatic size parameter of pre- and post-operative patients is considered an effective evaluation for restoring after PSS surgery.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.738-742
• /
• 2011

This paper has studied drain induced barrier lowering(DIBL) for Double Gate MOSFET(DGMOSFET) using analytical potential model. Two dimensional analytical potential model has been presented for symmetrical DGMOSFETs with process parameters. DIBL is very important short channel effects(SCEs) for nano structures since drain voltage has influenced on source potential distribution due to reduction of channel length. DIBL has to be small with decrease of channel length, but it increases with decrease of channel length due to SCEs. This potential model is used to obtain the change of DIBL for DGMOSFET correlated to channel doping profiles. Also device parameters including channel length, channel thickness, gate oxide thickness and doping intensity have been used to analyze DIBL.

• Korean Journal of Environmental Biology
• /
• v.31 no.2
• /
• pp.154-157
• /
• 2013

Length-weight relationships were estimated for 11 fish species caught in Baekya Island, Korea. Samples were caught in depths of <15 m by fish pots between November 2008 and July 2009. The sampling gear, fish pots, is a widely used as commercial fishing gear in shallow waters of the region. The most abundant families were Hexagrammidae (20.7%), Cottidae (18.5%), Tetraodontidae (14.8%) and Scorpaenidae (13.3%). Estimates for parameter b of the length-weight relationship ($W=aL^b$) ranged between 2.454 and 3.361.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.164-170
• /
• 2010

For the surge currents like lightning or ground fault currents containing high frequency components which cause the electromagnetic interferences for the electronic devices and communication equipment, the grounding impedances give the significantly composite characteristics which are dependent on the frequency of surge currents. In this paper, the analytical model and method for determining the optimal length of the newly developed coaxial type carbon ground electrode which has a little fluctuation in grounding impedance with frequency. The length of minimizing the fluctuation of grounding impedance by changing frequency from 100[Hz] to 1[MHz] was determined, and the validity of this proposed method was confirmed by comparing with the simulated and measured data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1105-1109
• /
• 2009

This paper deals with a polynomial thrust equation of a permanent magnet linear synchronous motor that is considered by a skew and overhang effects of permanent magnet. The skew length, the overhang length, the width and height of permanent magnet, the teeth length and air-gap length which effect to the flux density of air-gap are selected as variables of the polynomial thrust equation. Polynomial thrust equation is elicited by the 6 parameters. The results are satisfied that the values by polynomial thrust equation are compared ones by using 3-dimensional finite element analysis and experiment.

• Fisheries and Aquatic Sciences
• /
• v.13 no.3
• /
• pp.254-256
• /
• 2010

Length-weight relationships were estimated for 19 fish species in sargassum beds of Gamak Bay: Aulichthys japonicus, Pseudoblennius cottoides, Pseudoblennius percoides, Ditrema temmincki, Acanthogobius lactipes, Chaenogobius heptacanthus, Cryptocentrus filifer, Pterogobius elapoides, Pterogobius zonoleucus, Hyporhamphus sajori, Hexagrammos agrammus, Rudarius ercodes, Lateolabrax japonicus, Pholis crassispina, Pholis nebulosa, Scomber japonicus, Sebastes inermis, Ernogrammus hexagrammus, and Takifugu niphobles. Samples were caught by surrounding net at depths of <7 m between November 2007 and June 2008. The most abundant families were Gobiidae (26.3%), Cottidae (10.5%), and Pholididae (10.5%). Estimates for parameter b of the length-weight relationship (W=$aL^b$) ranged between 2.491 and 3.354.

• Tribology and Lubricants
• /
• v.25 no.3
• /
• pp.157-162
• /
• 2009

In this paper, the hydrodynamic pressure and minimum oil film thickness of a pin bush bearing for a connecting rod have been analyzed as functions of the number of oil grooves and an arc length of oil grooves. The lubrication characteristic of a pin bush is governed by oil groove design factors, which are considered in this study. The most influential design parameter is a number of oil grooves, which is three oil grooves with an arc length of oil groove, 1/6($60^{\circ}$). This means that oil groove with a long arc length of a pin bush does not contribute to the hydrodynamic pressure development. Thus the optimal design of a pin bush is necessary with an increased number of oil grooves and a reduced arc length.