• 제목/요약/키워드: length of cycle

검색결과 831건 처리시간 0.03초

765 kV용 400 kN 현수애자 개발 (Development of Extra High Voltage(400kN) Porcelain Insulator for Transmission Lines)

  • 최인혁;최장현;이동일;최연규
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제52권8호
    • /
    • pp.348-353
    • /
    • 2003
  • This paper was the research of high voltage suspension insulator (400 [kN]) including pottery stone, feldspar, clay and alumina of 17 [wt%]. The slurry was fabricated after ball milling mixed raw materials. Green compacts were made by the extrusion of jiggering method and were sintered at 1300[$^{\circ}C$] for 50 [min.] in the tunnel kiln. The sintered density was reached to 97% of theoretical density, and the bending strength was 1658 [k $g_{f}$/$\textrm{cm}^2$] and hardness and fracture toughness which was measured by ICL( indentation crack length ) method were 1658 (kgf/$\textrm{cm}^2$) and 27.5 [Gpa], respectively. In measurement of tana and insulation break voltage of 400 (kN) porcelain, tan$\delta$ took some numerical value between 17${\times}$10$_{-3}$ and 61${\times}$10$_{-3}$ and insulation break voltage value was 19.9$\pm$1.4 [㎸/mm]. The test was performed to research whether the shape of pin affect a overvoltage break load or not As a consequence, when a pin was designed a pin diameter 51 [mm] with the bottom form of two-step constructed with straight in the suspension insulator, Insulator showed overvoltage break load 52 [ton] of the highest value and reflected a fine characteristic in aged deterioration test which is one of the accelerated aging test. Also it could be confirmed a fine characteristic through performing the test that electrical property of insulator was established correctly in accordance with IEC 60383-1 standards.s.

실시간 신호제어시스템 기능성 평가방법론에 관한 연구 (A Study on Functionality Evaluation Method of Real-time Traffic Signal Control System)

  • 이철기;오영태;이환필;양륜호
    • 한국ITS학회 논문지
    • /
    • 제7권1호
    • /
    • pp.42-58
    • /
    • 2008
  • 심각해지는 교통난을 효율적으로 해결하기 위한 목적으로 실시간 신호제어시스템의 도입이 점차 확산되고 있다. 실시간 신호제어시스템은 수집정보의 신뢰도 및 시스템의 기능성이 중요하다 할 수 있으나, 시스템 구축 후 이에 대한 평가체계가 미비하여 본래의 기능을 제대로 수행하지 못하는 경우가 많이 발생하고 있다. 본 연구는 실시간 신호제어시스템에 대해 수집정보의 신뢰도는 물론 시스템의 기능성 등에 대한 평가를 통해 신호제어시스템 운영 효율을 파악하고 확장 및 운영의 방향을 제시하고자 한다. 분석결과 낮은 신뢰도를 보이거나, 이에 따른 대기행렬 길이 예측, 주기길이 변화, 좌회전 감응제어 등 시스템 기능성에 문제가 있는 부분들이 있음을 알 수 있었다. 이를 해결하기 위해서는 지속적인 모니터링을 통한 효율적인 유지보수체계가 필요하다고 판단된다.

  • PDF

크롬유혁의 인공땀액 처리에 의한 물성변화 (Changes on Physical Properties of Chrome Leather by Treatment with Artificial Perspiration)

  • Yoon, Jeong Ah;Choi, Suk Chul;Lee, Yang Hun;Chun, Tae Il
    • 한국염색가공학회지
    • /
    • 제7권4호
    • /
    • pp.25-32
    • /
    • 1995
  • This study was carried out to examine the influences of fatigue and perspiration on the deterioration of chrome leather for shoes. The samples were treated with acidic and alkaline artificial perspirations and applied cyclic tensile stress, and the elastic recovery from fatigue strain, tensile strength and elongation, stiffness etc. by regions and directions were determined. The physical properties generally indicate considerable difference by regions and directions due to the thickness, entangling state, and arrangement direction of fiber buldles within the leather. By the treatment of artificial perspirations, the length, weight, strength, elastic recovery from fatigue of the lether are decreased and the thicknes, elongation, and stiffness are increased; and their extents by the alkaline perspiration are higher than those by the acidic one. The elastic recovery from fatigue of samples are decreased with increasing fatigue cylcle; and indicate regressive relations against the logarithm of the elapsed time, and the means of regression coefficients are 2.73 > 2.55 > 2.22 for samples treated by the acidic perspiration, untreated, and treated by the alkaline perspiration, respectively. The tensile strength is decreased and elogation is increased by fatigue, but the changes are diminished likely due to a rearrangment of fiber bundles with increasing fatigue cycle. And the samples become a little flexible immediately after fatigue; but stiffen again with elastic recovery from fatigue strain, consequently for some cases their stiffness after recovery are rather greater than those before fatigre.

  • PDF

스팀업(Stim UP)매트 걷기운동 프로그램이 허약노인의 균형능력과 보행기능 및 관절 가동범위에 미치는 효과 (Effects of a Stim up Mat Walking Exercise Program on Balance, Gait Function and Joint Motion Range of the Frail Elderly)

  • 김경란;송미숙
    • 지역사회간호학회지
    • /
    • 제30권1호
    • /
    • pp.47-56
    • /
    • 2019
  • Purpose: This study was performed to evaluate effects of a stim-up matt walking exercise program on balance and gait of the frail elderly. Methods: A total of 37 elderly people recruited from S city were randomly assigned to the experimental group (n=22) and control group (n=15). The stim-up matt walking exercise program was offered twice a week for 8 weeks. Data were analyzed by SPSS 21.0. Results: The dynamic balance ability Timed Up and Go test of the experimental group was significantly faster than that of the control group (t=21.72, p<.001). The static balance ability open-eye standing test (t=44.15, p<.001) and close-eye standing test (t=9.01, p=.005) also showed increase in effects of the experimental group. In the walking ability, gait cycle (t=2.48, p=.018), cadence (t=-2.21, p=.034) and gait speed (t=-2.78, p=.009), positive effects were on. However, no statistically significant differences were found in stride length and double support. At the ankle joint range left ankle plantar flexion (t=3.92, p<.001) and left ankle dorsal flexion (t=4.51, p<.001) were higher in the experimental group than in the control group, and also right ankle plantar flexion (t=2.79, p=.008) and right ankle dorsal flexion (t=2.92, p=.006) increased in the experimental group. Conclusion: The significance of this study is that the stim-up matt walking exercise program for the frail elderly proves to be useful for improving balance and walking.

지표수 열교환기 적용 지열 히트펌프 시스템의 냉방 성능 (Cooling Performance of Geothermal Heat Pump Using Surface Water Heat Exchanger)

  • 임효재;공형진;손병후
    • 설비공학논문집
    • /
    • 제29권6호
    • /
    • pp.316-326
    • /
    • 2017
  • Commercial buildings and institutions are predominantly cooled, thereby dissipating excess heat to a vertical ground heat exchanger (VGHE), than heat extracted over an annual cycle. Surface waters, such as lakes and ponds, provide a cost-effective means of reducing the VGHE length, and in balancing the thermal loads to the ground. This paper presents the measurement and analysis of the cooling performance of ground-coupled heat pump (GCHP) system, using surface water heat exchanger (SWHE) submerged in an artificial pond. In order to measure the performance of the system, we installed monitoring equipment, including sensors, for assessing the temperature and power consumption, after which the operation parameters were determined. The results from the thermal performance test for the SWHE indicate that the temperatures at the outlet of the SWHE and within the pond were affected by outdoor air temperature. In addition, the results reveal similar variation trends on temperatures; however, the peak temperatures of the SWHE were somewhat greater than those of outdoor air, due to the thermal capacity of the pond. Analyzing the cooling performance over the measurement period, the average coefficient of performance (COP) of heat pump was found to be 5.71, while that for the entire system was 2.99.

MPEG-2 비디오 인코더의 프레임 메모리 구조 (The Architecture of the Frame Memory in MPEG-2 Video Encoder)

  • 서기범;정정화
    • 대한전자공학회논문지SD
    • /
    • 제37권3호
    • /
    • pp.55-61
    • /
    • 2000
  • 본 논문에서는 MPEG-2 비디오 인코더의 프레임 인터페이스 모듈에 대한 효율적인 하드웨어 구조를 제안한다. 인코더 모듈과 SDRAM 사이의 메모리 버퍼 크기를 줄이기 위해, 한 매크로 블록에 필요한 메모리액세스 시간을 dual-bank 동작과 버스트 길이 변화를 사용하여 필요 클럭 수를 최소화 한다. 이 최소화된 메모리 액세스 방법으로 인해 남는 클럭 사이클을 랜덤 액세스 횟수로 할당함으로써, 내부버퍼 크기, 데이터버스의 폭과 제어논리회로의 크기를 줄일 수 있었다. 제안된 프레임 메모리 모듈은 54㎒의 주파수에서 동작하며 설계된 라이브러리는 VTI/sup тм/ 0.5㎛ CMOS TLM 표준셀공정을 사용하였다. 제안된 구조를 C-code하드웨어 모델에 의해 생성된 테스트 벡터와 합성된 회로의 모의실험 결과를 비교함으로써 검증하였다. 제안된 구조의 버퍼 면적은 기존 구조의 버퍼 면적의 40%로 줄일수 있었다.

  • PDF

강상자형 다이아프램의 수직보강재 길이에 따른 거동 (Behavior on Vertical Stiffener Length of Steel Box Girder Support Diaphragm)

  • 김종렬;김우준;정경섭
    • 한국강구조학회 논문집
    • /
    • 제15권5호통권66호
    • /
    • pp.489-497
    • /
    • 2003
  • 사회적 환경에 따른 교량의 장대화와 단순화의 추세로 인해 구조적 시스템과 생명주기에서 교량 건설의 경제적 효율성이 증대되고 있다. 강교 제작의 경제성과 효율성을 위해 시공 전 상세한 구조해석이 실시되어져야 하며 특히 강상자형교에서는 지점부 다이아프램과 수직보강재가 초점이 되는 주요 부재중의 하나이다. 본 논문에서는 강상자형교를 시공하거나 확장, 보수하는 과정에서 일어나는 추가 사하중에 대하여 지점부의 다이아프램 거동 분석을 위해 실측과 구조해석을 통시에 수행하여 다이아프램부 응력 분배 거동을 분석하고 다이아프램 수각보강 재의 적절한 길이를 제안하고자 하였다.

북동 대서양에서의 중심층 및 상부점심층산 앨퉁이과 어류 마이크로넥톤의 섭이양식 (Food and feeding activity of micronektonic fish, Gonostomatidae, from meso-and upper bathypelagic layers in the northeastern Atlantic)

  • 고유봉;쥴리안
    • 한국해양학회지
    • /
    • 제21권2호
    • /
    • pp.85-91
    • /
    • 1986
  • 북동대서양 Rockall Trough(수심 약 3,000m)과 Poucupine seabight(수심 약 4,000m)의 중심층 및 상부 점심층에서 채집된 어류 micronekton 중, 우점생물인 Gonostomatidae과 10개 종에 대해 먹이 및 식성을 조사했다. 양해역 모두에서 2종 류에 대해서는 상세히 기술했다. 이들 생물은 일정한 섭이시간대가 없이 비주기적 으로 섭이했고, 한번에 조금씩 섭이하는 경향을 보였으며, 주요먹이생물은 요각류 (약 72% 이상) 및 패충류(약 13% 이상)로서 대부분이 어체장의 10%미만인 소형생 물이었다. 이러한 경향은 먹이생물이 풍부치 못한 환경인 심층에서의 서식에 매우 적합한 적용현상이라고 생각된다. 시식층과 먹이생물을 둘러싼 종간 관계가 역시 논의 되었다.

  • PDF

아밀로오스 함량이 다른 옥수수 전분의 겔 형성과 특성 (Formation and Properties of Gel from Maize Starches with Different Amylose Content)

  • 문세훈;신말식
    • 한국가정과학회:학술대회논문집
    • /
    • 한국가정과학회 1997년도 가정과학회 총회 및 학술대회
    • /
    • pp.45-49
    • /
    • 1997
  • 아밀로오스 함량이 다른 옥수수 전분을 $121^{\circ}C$에서 호화시켜 팽윤력과 용해도를 측정했을때, 팽윤력은 찰옥수수 전분인 Amaizo,가 가장 컸고, PFP, Amaizo, Amylomaize Ⅶ 순이었으며 Amaizo의 경우 용출된 겉보기 아밀로오스의 요드 친화력이 가장 높았고, 용해도 역시 높게 나타났다. Brookfield viscometer을 이용하여 0.25N NaOH용액으로 측정한 알칼리 호화양상은 Amylomaize Ⅶ이 최고점도 $10{\pm}10^3cp$를 나타낸 반면 Amaizo는 $70{\pm}10^3cp$로 Amylomaize Ⅶ에 비해 높은 값을 나타냈고, PFP는 70$\times$$10^3$까지 증가했다가 감소하였다. 전분과 물을 1 : 9로 하여 $121^{\circ}C$에서 가열-냉각 횟수를 4회 반복하며, 각 단계에서 형성된 겔의 성질을 비교하면 Amaizo로 만든 겔의 견고성, 부착성, 탄성과 옹집성이 가장 컸으며, 견고성은 가열-냉각처리를 2회 반복한 경우 가장 컸고 그 후 감소하였다. 옥수수전분 겔의 성질은 아밀로오스 함량보다는 사슬길이나 가열 중 용출되는 부분의 성질에 더 상관성이 높았다.

  • PDF

동축형 스월-제트 인젝터의 음향가진에 따른 동특성 (Dynamic Characteristics of Coaxial Swirl-Jet Injector with Acoustic Excitation)

  • 배진현;김태성;정석규;정찬영;최정열;윤영빈
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.691-698
    • /
    • 2017
  • 본 연구에서는 스피커를 사용하여 Jet와 Swirl 유동에 각각 가진을 가함으로써 기체-기체 동축형 제트-스월 인젝터의 Injector transfer function (ITF)을 측정하였다. Feed system의 길이를 변화시켜감에 따라 ITF를 측정한 결과 섭동이 가해진 유동이 흐르는 공간의 공진주파수에서 ITF의 peak가 발생하는 것을 확인할 수 있었다. Jet 유동을 변화시키면서 Jet 유동에 가진을 줄 때, ITF의 크기는 감소하다가 56 slpm 이후부터는 증가하는 것을 확인할 수 있었다. 즉, Jet와 Swirl 유동의 속도차가 클수록 ITF의 크기가 커지는 것을 확인할 수 있었다. Swirl 가진 시에는 Jet 유동이 증가함에 따라 ITF가 감소하는 것을 확인할 수 있었는데, 이는 후단에서 일정 유량 대비 가진 에너지가 감소하기 때문이며, 이러한 차이는 후단의 Hot wire anemometer가 인젝터 중심축에 위치하기 때문이다.

  • PDF