• Asian Journal of Turfgrass Science
• /
• v.10 no.1
• /
• pp.1-11
• /
• 1996

Fifty accessions in Zoysia species and forty-one hybrid lines were evaluated in order to detect analyze the genectic variation of Zoysiagrasses and to obtain the basic information for breeding. 1.Plant height ranged from 13 to 34.5cm, leaf length from 7 to 26cm, leaf width from 2 to 7mm, and first leaf height from 1.1 to 8.5cm 2. The correlations among plant height, leaf length and first-leaf height were high, but leaf Width was correlated only With leaf length. 3. Stolon length was varied from 10 to 108cm, number of stolons from 12 to 53, internode length from 2 to 6.1cm and coverage percentage from 10 to 90%. 4.There were correlation among stolen length, number of stolons, internode length and coverage percentage except between stolen and internode length. 5.M1J and MC2 showed the highest level in stolen length, number of stolons and coverage percentage. Therefore they will be the best breeding materials for the purpose of fast covering. 6.According to the analysis on October 26, 1995, yellow color-change rate of leaves ranged from 5 to 85%, red color-change from 0 to 75% and sum of yellow and red change from 20 to 95%. Speciallty M2M1 and FL-41 kept green color untill early December, indicating that they had the late dormancy. 7. Visual assessment of stolon length and number of stolons, showed similar tendency With actually measured data. 8. Shoot density was very high in M2M1 and S2, and showed negative correlation with leaf width. 9. It is known in Korea that the darker green color of lawngrass is, the better it looks. There were 11 lines with dark green color leaves such as J 85-10, Meyer in Z. japonira, one asacession in Z. matrella and M2M1, M2S8, JM2, 55C2 in hybrid lines.

• The Research Journal of the Costume Culture
• /
• v.2 no.1
• /
• pp.167-186
• /
• 1994

The purpose of his study is to investigate the relationship between the business cycle and the fashion of silhouette from 1956 to 1992. Correlation analysis an regression analysis were used to investigate the relation of them. In this study, the coincident composite index was used as business cycle and change of skirt in length and width, collar and pants in width wee thoroughly checked through graphs and photographs. The results of analysis are as follows. 1. When the economy is to ascend, the skirts are short and narrow. On the country, when the economy is descend, they are long and wide. 2. The business cycle gives influence on skirts line and with, that is, about 18%, 33% of total changes. 3. In change of fashion, skirts length and width had significant positive correlation and they showed a tendency to move together. On the other hand, the change of collar and patterns in width have no connection with business fluctuation. 4. The change of fashion is affected by the movement of itself. According to analysis that includes the trend of skirts, about 50%, and 35% of changes in skirts length and width were decided by them,. and about 52% and 35% of change in collar and patterns width were decided by them.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.17 no.1
• /
• pp.14-16
• /
• 2006

Background and Objectives: The purpose of this study is to investigate the change of vocal tract length according to the level of the pitch by the singers. Materials and Methods: Fifteen tenors were asked to produce successive /a/ sound in G4(382Hz) for the head register, C3(131Hz) for the chest register and usual speaking sound. The control group consisted of 15 males of an similar age who are not professional singers. The length of vocal tract was calculated by applying the formula of Fn=(2n-1) c/4L(F : formant frequency, c : the speed of sound in the vocal tract(350m/sec), L : length of vocal tract, $n=1,2,3,4,{\ldots}{\infty}$). Results: In singer's group, there showed no significant statistical difference of length among head and chest register and usual speaking sound. However in the control group, there showed statistically significant difference of length. Comparison of the absolute difference in the length of vocal tract by changing level of pitch in phonation, between the control group and the singers group. Changing from G4 phonation to C3 phonation and C3 phonation to usual speaking sound showed statistically difference of vocal tract length was less in the singers group than the control group. Conclusion: The change of vocal tract length, in either speaking or singing, was less in singers than the control group. We could assume that the singers maintain their larynx position constantly throughout the pitch range when phonation.

• Journal of architectural history
• /
• v.25 no.3
• /
• pp.23-35
• /
• 2016

The purpose of this study is to classify types of the eaves structure of buildings with the Jusimpo-type structure and to analyze the characteristics of each eaves structure. For this objective, forty buildings were selected and investigated. The results of analysis are summarized as follows. First, the main members of framework which handle a load burden on the long-rafter(長椽) are classified as the Jusim-dori(柱心道里) and the Oemok-dori(外目道里). Based on the method of handling a load, the eaves structure is classified into three types; the Jusim-processing-type(柱心中心形), the Oemok-processing-type(外目中 心形), and the Oemok-processing-variant-type(外目中心變異形). The Jusim-processing-type is the set where the internal length of a long-rafter is longer than the length of the eaves on the basis of the center of a column. The Oemok-processing-type is the set where the external length of a long-rafter is longer than the internal length of it. And the Oemok-processing-variant-type is the set where the internal length of a long-rafter is longer than the external length of it, but it is shorter than the length of the eaves which includes the extruded length of a Buyeon(浮椽). Second, the Jusim-processing-type had been generally adopted in the Jusimpo-type structure of the Goryeo Dynasty. But since the 17th century, the Oemok-processing-type had the highest application rate. Third, the change from the Jusimdori-processing-structure to the Oemokdori-processing-structure means that the long-rafter is moved to the direction of outside of the building, and thus the Jung-dori(中道里) is gradually moved to the column center. And, the change of the eaves with the Jusimpo-type structure was not a process for increasing the length of the eaves but a process for adopting the advantages of the Dapo-type structure by changing the arrangement of purlin. Fourth, the change from the Jusimpo-type structure to the Dapo-type structure could be understood as a process for moving the main point for handling a load from the Jusim-dori to the Oemok-dori.

• Journal of the Korean Society of Costume
• /
• v.51 no.2
• /
• pp.193-203
• /
• 2001

The hip-length jacket(유) worn by the Korean from the ancient times is tole prototype of the contemporary jacket. Hip-length jacket was transferred to Japan and worn by all the people beyond the class. From 12C, the King and the high class people wore the clothing influenced by Tang(唐) country but the common people continuously wore the hip-length jacket. Currently the hip-length jacket is worn by the merchant and is used as the clothing of the celebration. The hip-length jacket has not been much changed in terms of the form.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.54-63
• /
• 2019

This study investigated on the compressive strength and the length change test with using the waste glass and graphene oxide for recycling the waste glass as the aggregate. Curing on 3-day and 7-day, the compressive strength was enhanced as the usage of waste glass was increased. Especially, the huge difference in the compressive strength was observed when the amount of substituting on the waste glass was used on 10~50%. With 50% of waste glass condition, the compressive strength was portionally enhanced as the usage of graphene oxide was increased and its value was 42.6 N/㎟ with 0.2% of graphene oxide. In terms of the length change test, the use of high content of waste glass led length change value to increase, but it was dropped down as the portion of waste glass was above 50%. Furthermore, in the case of using 50% of waste glass, the use of high amount of graphene oxide tended to decrease the length change value. That is, graphene oxide may contribute on boosting the cement hydration reaction and blocking the ion's movement.

• Journal of Environmental Science International
• /
• v.22 no.7
• /
• pp.895-903
• /
• 2013

This study analyzed on characteristics of the ground-water capture zone in coastal areas and mid-mountainous area according to pumping rate. For this study, it targeted Jejudo island where is the volcanic island. To analyze, MODFLOW model and MODPATH model, which are the ground-water flow analysis models, were used. As a result of research, the following conclusions could be obtained. As a result of analyzing influence of a change in pumping time upon length of capture zone, the length of capture zone in coastal area was indicated to be greater in the changing ratio compared to the length of capture zone in mid-mountainous area. Next, in the coastal area, the pumping rate and the capture-zone length are changing similarly. However, in mid-mountainous area, the length of capture zone was indicated to grow when the pumping rate comes to exceed 1,500m3/day. As a result of analyzing influence of a change in pumping time upon capture area, the tendency of a change in the area was indicated similarly in coastal areas and mid-mountainous area. Especially, it could be known that the larger pumping rate leads to the more definite increase in tendency to a change in capture area. Based on this study, it was allowed to be possibly used in the suitable pumping rate in coastal areas and mid-mountainous area of the volcano island in the future. A follow-up research is judged to necessarily analyze the influence of tubular-well group upon capture zone by additionally analyzing a change in capture zone targeting the concentrated tubular well.

• Restorative Dentistry and Endodontics
• /
• v.36 no.1
• /
• pp.59-65
• /
• 2011

Objectives: The purpose of this study is to compare the apical transportation and working length change in curved root canals created in resin blocks, using 3 geometrically different types of Ni-Ti files, K3, NRT, and Profile. Materials and Methods: The curvature of 30 resin blocks was measured by Schneider technique and each groups of Ni-Ti files were allocated with 10 resin blocks at random. The canals were shaped with Ni-Ti files by Crown-down technique. It was analyzed by Double radiograph superimposition method (Backman CA 1992), and for the accuracy and consistency, specially designed jig, digital X-ray, and CAD/CAM software for measurement of apical transportation were used. The amount of apical transportation was measured at 0, 1, 3, 5 mm from 'apical foramen - 0.5 mm' area, and the alteration of the working length before and after canal shaping was also measured. For statistics, Kruskal-Wallis One Way Analysis was used. Results: There was no significant difference between the groups in the amount of working length change and apical transportation at 0, 1, and 3 mm area (p = 0.027), however, the amount of apical transportation at 5 mm area showed significant difference between K3 and Profile system (p = 0.924). Conclusions: As a result of this study, the 3 geometrically different Ni-Ti files showed no significant difference in apical transportation and working length change and maintained the original root canal shape.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3711-3718
• /
• 2012

Here, we report a chain-length dependent morphology and pore structure tailing of mesoporous silica templated from organogels, which is formed by primary alkylamine and ethylene glycol at room temperature. As the chain length of alkylamine changes from 12 to 18, the resulted materials exhibit a morphology change from layers to spheres and platelets, respectively. SEM and TEM observation revealed that these shapes appear to be inherited from their parent organogels. Further pore structure characterization by nitrogen sorption analysis demonstrates that all the resulted silicas exhibit typical IV isotherms indicative of uniform mesopores, and their pore sizes are dependent on the chain length of alkylamine used.

• Journal of the Korean Society for Railway
• /
• v.7 no.3
• /
• pp.200-207
• /
• 2004

Theoretical study has been conducted to clarify pressure characteristics of KTX (Korea Train eXpress) in tunnel. The severe pressure change in tunnel may give rise to the ear-discomfort for passenger and fatigue for car body. Critical tunnel lengths which are induced by x-t diagram analysis can be applied to the experimental results measured by using the running test with atmospheric pressure sensors and portable data acquisition system in previous study. In this study, the tunnels from 200m to 4000m in length have been chosen for the investigation of tunnel length effects. We found that there are similar patterns of external pressure change for each critical tunnel length. The critical tunnel lengths are governed by train speed, train length and sonic velocity. And, the patterns of pressure wave in tunnel are classified into eight groups.