• 한국운동역학회지
• /
• 제27권2호
• /
• pp.109-116
• /
• 2017

Objective: This study aimed to investigate the relationship between leg stiffness and kinematic variables according to load while running. Method: Participants included eight healthy men (mean age, $22.75{\pm}1.16years$; mean height: $1.73{\pm}0.01m$; mean body weight, $71.37{\pm}5.50kg$) who ran with no load or a backpack loaded with 14.08% or 28.17% of their body weight. The analyzed variables included leg stiffness, ground contact time, center of gravity (COG) displacement and Y-axis velocity, lower-extremity joint angle (hip, knee, ankle), peak vertical force (PVF), and change in stance phase leg length. Results: Dimensionless leg stiffness increased significantly with increasing load during running, which was the result of increased PVF and contact time due to decreased leg lengths and COG displacement and velocity. Leg length and leg stiffness showed a negative correlation (r = -.902, $R^2=0.814$). COG velocity showed a similar correlation with COG displacement (r = .408, $R^2=.166$) and contact time (r = -.455, $R^2=.207$). Conclusion: Dimensionless leg stiffness increased during running with a load. In this investigation, leg stiffness due to load increased was most closely related to the PVF, knee joint angle, and change in stance phase leg length. However, leg stiffness was unaffected by change in contact time, COG velocity, and COG displacement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.115-116
• /
• 2016

This study applied BS replacement mortar's ERCO to see what impact it has on moisture evaporation and contraction changes, and resulted in the following. Depending on the rate of change in length according to the cure method of BS replacement mortar, high-strength areas were shown to have a bigger increase in the rate of change in length than regular or low-strength areas, and differences in rate of change in length due to ERCO cure methods were shown to be slight. For rate of changes in mass, on the whole there was an increase in the order of dry curing, cover curing, 7-day water curing, and28-day water curing. A comprehensive view says that after removal of test piece specimens, ERCO application did not expect a sufficient curing effect in the BS area.

• 한국연초학회지
• /
• 제27권2호
• /
• pp.195-200
• /
• 2005

The goal of refining is to treat fibers so they meet the requirements of the papermaking process. The refining process in papermaking has great influence on the quality of the final product by changing the fiber properties, such as fiber length, shape, fine contents and so on. In this study, the effect on the morphological change of fibers by the refining conditions were investigated using the fiber morphology analyzer. Fiber morphology analyzer used to determine which pulps are suitable for producing particular products. Furthermore it is widely used in paper mills to monitor paper quality. The morphological change of fibers according to refining conditions were evaluated out by measuring fiber, shive and fine. In the fiber morphology, the domestic reconstituted tobacco fiber has the bigger average fiber length value than that of the foreign reconstituted tobacco.

• 한국세라믹학회지
• /
• 제50권5호
• /
• pp.319-325
• /
• 2013

In this study, petroleum cokes ash and $C_{12}A_7$-based slag were used for the shrinkage reduction and strength enhancement of mortar. The hydration properties of shrinkage reduction agents were analysed. The flow, change of length and compressive strength were experimented with mortar-added shrinkage reduction agents. As a result of this study, petroleum cokes ash : $C_{12}A_7$-based slag = 60~80% : 20~40% showed excellent results. In the case of mortar with 20% $C_{12}A_7$-based slag, the setting time and change of length were similar to Ref. mortar. The flow and compressive strength were superior to Ref. mortar. In the case of mortar with a 40% $C_{12}A_7$-based slag, the setting time was longer than Ref. mortar. The compressive strength of 3 days and 7 days were superior to Ref. mortar.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권1_2호
• /
• pp.40-53
• /
• 1992

This sutdy aimed at examining the effect of lingual frenectomy on phonation & tongue movement. Almost the patient visiting to department of oral & maxillofacial surgery for the treatment of tongue tie always complain the speech problem. Many operation was performed according to this problem. But the objective evaluation of the speech change have been deficient. The experimental group was 25 adult males. Fourteen Korean consonants & after Korean vowels was combined and seventy sound was made for speech analysis. Before & after lingual frenectomy, the speech of the above mentioned group was recorded and then analysed by the Speech Workstation computer software. And before & after operation, the lingual frenum & tongue protrusion amount vas measured. The results were as follows : 1. The pre-operative length of lingual frenum was inverse proportion with the pre-operative length of the protrusive tongue. 2. The average difference between pre & post-operative length of the protrusive tongue was about 23 mm. 3. In the comparison of consonant continuing time change, fricative consonant(r, s, h) was increased post-operatively. 4. In the comparison of the vowel frequency formant change, the "i"and "u" sound vas reliably changed. 5. There was no reliable speech changes on the other sounds.

• KIEAE Journal
• /
• 제12권3호
• /
• pp.53-60
• /
• 2012

This research is an illustrative research to verify the thermo environmental change created after introduction of indoor pond through abridged model test and simulation analysis. Especially, temperature and comfort level are analyzed by adjusting factors like size of water space, distance length, and location. Summary of the research is as follows. First, the most effective size of water space is 7% of the indoor size, from southern side. Temperature reduction effect is about $1.6^{\circ}C$(5.5%), and for the comfort level, it is found that pmv index increases 8%. Second, based on the simulation of distance length with the sphere, it is more effective as it is close to the surface. If distance length is more than 0.5m, there is no effect on reduction of temperature and comfort level of indoor environment. Lastly, for the analysis by location of the introduced water space, simulation is undertaken by dividing the water space (14% of the indoor size) with front, side, rear and center types. Temperature reduction effect is found to be : front type ($-1.53^{\circ}C$), side type ($-0.82^{\circ}C$), rear type ($-0.44^{\circ}C$), center type ($-0.28^{\circ}C$), respectively. The indoor environment change data by introduction of water space, found in this research, is at initial phase, but it is deemed to be a basic data to refer when planning actual water space.

• 한국분무공학회지
• /
• 제28권4호
• /
• pp.198-206
• /
• 2023

In this study, visualization of in-cylinder spray behavior and spark channel stretching by air flow characteristics depending on engine operating conditions were investigated. For in-cylinder spray behavior, increase in engine rpm did not alter the counter-clockwise air flow direction and location of in-cylinder dominant air flow but increased average air flow velocity, which hindered spray propagation parallel to the piston surface. When injection timing was retarded, direction of in-cylinder dominant air flow was changed, and average air flow velocity was reduced resulting in an increase in spray penetration length and change in direction. For spark channel stretching, increase in air flow speed did not affect spark channel stretch direction but affected length due to increase in spark channel resistance and limitation of energy ignition coil can handle. Change in air flow direction affected spark channel stretch direction where the air flow was obstructed by ground electrode which caused spark channel direction to occur in the opposing direction of air flow. It also affected spark channel stretch length due to change in air flow speed around the spark plug electrode from the interaction between the air flow and ground electrode.

• 대한가정학회지
• /
• 제24권3호
• /
• pp.51-58
• /
• 1986

This study is to investigate the Function of sleeve for the construction of cuffs. Three measuremental items of sleeve cap high, length of sleeve and puff quantity of upper sleeve cap are compared between when the experimental man raises righthand static pose. The wearing test is done in sewing cuffs of either fixing up cuffs or not-fixing up cuffs, and in no cuffs. Three measuremental items are pulled length from sleeve end, pulled length from side waist line, and pulled dimensions from waist line. 1. The result according to the length and dimensions variation caused by a change of sleeve cap high. 2. The results according to the length and dimensions variation caused by a sort of sleeve length. 3. The results according to the length and dimension variation caused by the puff quantity of sleeve cap.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.637-640
• /
• 1998

Generally, the durability of the reinforced concrete structures reduce when they are constructed in marine environments. The Mg ions and sulfate ions in seawater cause chemical attacks in concrete and the cracks in concrete result from corrosion of steel due to chlorides. In this study, the mortar specimens made from 5 different types of cement were immersed in artificial seawater of 2 times concentration and then we measured the compressive strength, the length change and the weight change. As a result of this study, we found that the compressive strength ratio decreased in the immersed 56days. We also found the longer the immersed days were, the more the increase of weight ratio and the length change were.

• 대한음성학회지:말소리
• /
• 제39호
• /
• pp.1-14
• /
• 2000

In Korean, it has been well Down that vowel length plays an important role in differentiating word meanings. But the distinction between long and short vowels is often ignored by young generation. The purpose of this paper is to investigate the change in rhythm patterns. In addition, it is also examined whether this change has resulted in the differences in prosodic features between young and old groups. This study is based on H. B. Lee's 'rhythm pattern theory' Based on his assumption, it is suggested that the loss of original vowel length has caused the place of accent to move from the first to the second syllable.