• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.80-89
• /
• 2016

The median exclusive bus lanes with the purpose of improving public transport as part of a public transport promoting policy propel to improves the speed of the bus and guarantee punctuality security of public transportation for citizen satisfaction. In Median Exclusive bus lanes, Intersection operational methods are classified as turn prohibition, left turn, left turn U-Turn after turn prohibition. However, there are not clear criteria for applying for turn left U-Turn and related researches. The purpose of this study is to search a method for more safely operation when we operate turn left U-Turn in median exclusive bus lanes intersection. As a result, Bus stop in median exclusive bus lane should set back 12m for left turn, 17m for left turn U-turn during 60km/h and set back 13m for left turn, 17m for left turn U-turn during 50km/h.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.42-54
• /
• 2018

This study is to establish the traffic volume-based warrants of left-turn lanes in unsignalized intersections based on a risk probability methodology. This study applied a risk probability of a potential rear-end collision between a left-turn vehicle and the immediately following through vehicle. With the shifted negative exponential model and the compound probability theorem, the risk probability can be expressed as the function of directional volumes, opposing volumes and the percentage of left-turns for a two-lane and four-land highway, respectively. The warrants of installing left-turn lanes on unsignalized intersections were developed with the risk probability. The warrants define the total approaching and opposing volumes to encourage a left-turn lane as a function of operating speed, percentage of left-turn, and number of lanes.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.597-606
• /
• 2015

Until now, u-turn lane installation methods have been studied variously. But, There is no specific standard yet. This study ranges are commercial area in Incheon metropolitan city through field investigation and presents specific design standard for efficient operation of left turn using a field data through calculating relevant permitted u-turn lane length and minimum separation distance from the front intersection to starting point of permitted u-turn lane in urban signalized intersections in commercial area. Relevant permitted u-turn lane length is found to be 32m and minimum separation distances from the front intersection to starting point of permitted u-turn lanes are 72m, 40m, 24m in case of 1 left turn lane, 2 left turn lanes and 3 left turn lanes respectively. By comparing result values and field data, they had a large difference under the similar situations in their lengths. This result is caused of no specific standard about design of u-turn lanes. If results of this study applied to design of u-turn lanes, signalized intersections in urban commercial areas would be operated more safety and efficiently.

• Journal of Korean Society of Transportation
• /
• v.5 no.2
• /
• pp.19-35
• /
• 1987

Transportation energy saving is a national concern because all national petroleum energy is imported. A number of intersections are operating as semi-protected intersections, which have left-turn signal but not exclusive left-turn lanes, because of limited roadways in urban areas. Since the traffic signal methods for the intersections having left-turn signal/lanes cannot be applied to the semi-protected intersection, it is needed to develop a new technique. The purpose of this study was to develop a traffic signal timing method at semi-protected intersections for energy saving and to computerize the method for the practical use. A probability model which could estimate left-turn utilization factors of through traffic during green signal was developed based on field studies. Employing the factors, macro-models to estimate vehicular average delay and proportions of vehicles stopped at the semiprotected intersections were developed. The calculated values of the delay model agreed well with the simulated values of a simulation model using SLAM Ⅱ, a simulation language. Using the two models and the idling fuel consumption rate and the excess fuel consumption per stop-go speed change of vehicles. a traffic signal timing method at semi-protected intersections for energy saving was developed and computerized. The method can be used for other measures of effectiveness such as minimum delay, minimum stop ratio, etc.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.13-21
• /
• 2015

This study focuses on operational analysis of 2 types of intersection shared lanes. First, the analysis showed that a through & right-turn shared lane is always less used than the adjacent through-only lanes and as a result, operational efficiency deteriorates. To improve the efficiency fine-tuning in signal timing optimization using lane-by-lane traffic volume data is required. Further improvement can be achieved by guiding drivers to equally use the shared lane. For left-turn & U-turn shared lanes, it was found that saturation flow rate is affected by interference between U-turn and conflicting right-turn movements. However, since such interference does not occur in every cycle, a statistical model must be established to develop realistic adjustment factor for saturation flow rate of the shared lane.

• Journal of Korean Society of Transportation
• /
• v.8 no.1
• /
• pp.25-40
• /
• 1990

This study was undertaken to develop a traffic signal timing method for interconnected and semi-protected-left-turn intersections(the intersections which have left-turn signal but not exclusive left-turn lanes) on four-lane streets for energy saving and to computerize the method for the practical use. For this study, a probability model which could estimate the utilized time of the shared left-turn lane by through traffic during green period was developed based on field studies. The two left-turn treatments, leading and lagging left-turns, were tested for the intersections, and it can be concluded that the leading left-turn was more efficient for the normal urban streets on which through traffic is major traffic. Adopting the leading left-turn macro-models to estimate vehicular average delay and proportions of vehicles stopped at the intersections were developed. Using the two models as well as the idling fuel consumpution rate and the excess fuel consumption per stop-go speed change, a traffic signal timing method for the intersections for energy saving was developed and computerized. The method can be used for more than four-lane streets and for other measures of effectiveness such as minimum delay, minimum stop rates, etc.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.65-77
• /
• 2007

A two-way left-turn lane is a continuous center left-turn lane that could be used as a deceleration and refuge area for both directions of left-turning vehicles. TWLTL's have been used effectively for access management treatment when applied to a highway that has wide-spread left turning traffic demand and a high-density of side streets. In this study, an effective analysis was carried out using a computer-based simulation tool, VISSIM, in order to evaluate performance and safety effects of TWLTLs and develop a warrant. In conclusion, the results indicated that there was a remarkable decrease of through and left-turning vehicle travel time delay on the main road and improvement of traffic safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1551-1558
• /
• 2013

The purpose of this study is deriving proper plan which is improving functionality of three-way intersection in two-way road by using shoulder. Alternatives of this study were considered as installation of yield lane and application of TWLTLs (Two-Way Left-Turn Lanes). Case studies to utilize alternatives were limited to national and local roadways which is wider than 11 meters due to be required 3 lanes. Under various traffic conditions such as traffic volume of each direction and left-turn, alternatives were analyzed by simulation. As a results, application of TWLTLs was better than installation of yield lane in terms of improving rate (8.0% vs. 3.7%). Application of TWLTLs is supposed to better alternative, however enough driver education is required to improving safety because it is different with existing driving pattern and/or behaviors. Some limitations and future research agenda have also been discussed by on-site inspections.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.30-44
• /
• 2020

The application of PPLT is difficult to analyze and judge only from the effects of the delay time. In this study, the application of PPLT was proposed using not only the delay time of PLT and PPLT due to the change in traffic volume and the number of opposite straight lanes but also the traffic volume of passing a left turn and the number of conflict risks as indicators. According to the analysis, the more left-turn traffic than capacity and the less opposite-straight volume, the greater the PPLT effect. On the other hand, if the left-turn traffic is below capacity, the delay time will be reduced partially, but the overall passing left turn volume will not increase, and the conflict risk will increase. In addition, the conflict risk increases in the third lane or higher. Moreover, the difference of passing left-turn volume between PLT and PPLT showed a pattern similar to the delay time difference, and the PPLT coverage was wider than the difference in delay time and was associated more with the conflict risk numbers. Therefore, it would be reasonable to use passing left-turn traffic primarily, consider the delay time below the left-turn capacity, and consider the conflicting risk numbers simultaneously at or above the opposite straight three lanes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.107-115
• /
• 2011

Since 2009 The Korean National Police Agency has been pushed "permissive left-turn" forward in order to making progress in Korean traffic operations system. Preceding researches manuals and guidelines present 6 standards(# of accidents # of lanes, pedestrian volume sight # of permissive left-turn lanes vehicle volume) as installation permissive left-turn. But in practical affairs it is most important that secure enough Gap-time between permissive left-turn vehicle and opposite through lane vehicle to make permissive left-turn vehicle move safer and more efficiently. This study suggests applying gap acceptance theory in microscopic model to permissive left-turn installation standards. Analysis methods of this study are field data survey statistical analysis and microscopic simulation analysis. This study collected field data by using AVI recording and measured permissive left-turn vehicle intersection passing time(T1) and against the opposite through lane vehicle Gap-time(T2). And statistical analysis performed about two values that measured before to predict the functionality between T1 and T2. These studies to overcome the limit of sample size carried out a microscopic simulation(VISSIM) plan and collect more samples to input statistical analysis.