• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.1-7
• /
• 2008

본 논문에서는 손실을 고려한 Metamaterial(MTM) 전송선의 단일 셀을 구성하고, 이 전송선에서 방사효과를 갖는 파라미터들의 실제 값을 구해본다. 그리고 이 단일 셀을 이용하여 분산 다이어그램을 그려, 여러 셀을 cascade로 연결하여 공진체로 사용하기 위한 조건들을 찾아낸다. 공진체로 사용할 시 종단을 단락 또는 개방을 하게 되는데, 각각의 경우에 따라 공진 주파수를 알아내기 위해 나타나는 입력 임피던스 혹은 입력 어드미턴스에 대해서 논의한다. 이를 이용하여 공진 체의 Quality Factor와 대역폭을 구하였으며, 공진 안테나의 입력 어드미턴스를 회로 시뮬레이션과 EM 시뮬레이션에서 비교하였다. 또한 단일 셀을 이용한 안테나를 설계하여, $0.05\lambda_0\times0.12\lambda_0$의 초소형 안테나로의 설계 시 방사효과 모델링이 어떤 영향을 미치는지 분석하였다.

• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.47-52
• /
• 2008

좌우현 합성 선로 메타재질구조 쎌 형식인 UWB 대역통과여파기의 저지특성을 향상시키기 위해, 메타재질특성을 유지하면서도 소형화라는 설계목적에 적합한 저역통과여파기 개념을 제안한다. 따라서 대역통과여파기 자체는 파장의 0.25배보다 훨씬 작게 만들어지고, 이는 인터디지틀 결합기와 접지된 스텁으로 구성되며, 전후에 대칭형 소형 저역통과 블록을 가진다. 설계결과는, 예상대로, 관내파장의 1/8의 크기, 대역폭 100%, 1dB 이하의 삽입손실, 평탄한 군지연, 우수한 반사손실 특성을 보인다.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.288-291
• /
• 2012

We designed an ultra-wide band-pass filter applicable to microwave reflectometry for KSTAR (Korea Superconducting Tokamak Advanced Research) and to microwave photonics. The proposed ultra-wide band-pass filter exhibits a metamaterial structure characterized by a wide band, low insertion loss, and high skirt selectivity. The proposed filter is applied to enhance the linearity of reflectometry at the output of a VCO (voltage controlled oscillator). The pass-band of the proposed filter is observed at 18~28 GHz, and the out-of-band rejection is below 20 dB. Further, we constructed an unwrapped negative phase of S(2, 1) to verify the characteristics of the metamaterial. The under- and upper-band at lower limits of the pass-band are left- and right-handed, respectively. The group delay of the filter is less than 0.5 ns.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1159-1163
• /
• 2012

In this paper, a new method is suggested to reduce the size of a wide-band array antenna. The power-divider for the feeding structure is made compact as ${\lambda}/8$ with the help of a novel Metamaterial UWB bandpass filter. This power divider is clearly different from others in that the proposed design uses microstrip structured Composite Right and Left-Handed (CRLH) filters, while others use two dielectric layers or long tapered transmission lines. In order to validate the proposed design method, the circuit and full-wave simulated results of the power divider with the Metamaterial UWB filters are compared to each other, and the Metamaterial properties of the structure are shown with the electric field at the ZOR and dispersion diagram. Furthermore, the antenna performance of the fabricated antenna with the power divider is measured and compared with the prediction. Also, the size reduction effect by the proposed scheme is addressed.

• 한국정보통신학회논문지
• /
• 제18권2호
• /
• pp.260-267
• /
• 2014

본 논문에서는 칩커패시터와 마이크로스트립 선로를 이용하여 LH 구조의 단위셀을 고안하고, 제안된 단위셀로부터 등가회로를 추출하여 단위셀의 제반 특성을 분석하였으며, 광대역 고역통과필터를 설계하는데 적용하였다. 이 필터는 고역통과 특성을 갖는 여러 개의 단위셀을 종속 연결하여 마이크로스트립 전송선에 구현하였으며, 그 성능은 0~2.18 GHz의 저지대역에서 62.9dB의 대역제거 특성과 3.0~12.75 GHz의 통과대역에서 1.17dB 이하의 삽입손실을 갖는다.

• 한국패류학회:학술대회논문집
• /
• 한국패류학회 2005년도 전기 학술대회 초록집
• /
• pp.19-19
• /
• 2005

• 한국패류학회:학술대회논문집
• /
• 한국패류학회 2005년도 전기 학술대회 초록집
• /
• pp.20-20
• /
• 2005

• The Journal of Korean Physical Therapy
• /
• 제31권3호
• /
• pp.157-160
• /
• 2019

Purpose: We compared the activation pattern of the mirror neurons (MN) between two types of hand movement according to action observation using functional MRI. Methods: Twelve right-handed healthy subjects (5 male and 7 female, mean age $21.92{\pm}2.02years$) participated in the experiment. During fMRI scanning, subjects underwent two different stimuli on the screen: 1) video clips showing repeated grasping and releasing of the ball via simple hand movement (SHM), and (2) video clips showing an actor performing a Purdue Pegboard test via complex hand movement (CHM). paired t-test in statistical parametric mapping (SPM) was used to compare the activation differences between the two types of hand movement. Results: CHM as compared with the SHM produced a higher blood oxygen level dependent (BOLD) signal response in the right superior frontal gyrus, left inferior and superior parietal lobules, and lingual gyrus. However, no greater BOLD signal response was found by SHM compared with CHM (FWE corrected, p<0.05). Conclusion: Our findings provided that the activation patterns for observation of SHM and CHM are different. CHM also elicited boarder or stronger activations in the brain, including inferior parietal lobule called the MN region.

• 한국운동역학회지
• /
• 제32권4호
• /
• pp.121-127
• /
• 2022

Objective: The purpose of this study was to investigate potential effects of transcranial direct current stimulation (tDCS) on bimanual force control capabilities in healthy young adults. Method: Eighteen right-handed healthy young adults (10 females and 8 males; age: 23.55 ± 3.56 yrs) participated in this crossover design study. All participants were randomly allocated to both active-tDCS and sham-tDCS conditions, respectively. While receiving 20 min of active- or sham-tDCS interventions, all participants performed bimanual isometric force control tasks at four submaximal targeted force levels (i.e., 5%, 10%, 15, and 20% of maximal voluntary contraction: MVC). To compare bimanual force control capabilities including force accuracy, variability, and regularity between active-tDCS and sham-tDCS conditions, we conducted two-way repeated measures ANOVAs (2 × 4; tDCS condition × Force levels). Results: We found no significant difference in baseline MVC between active-tDCS and sham-tDCS conditions. Moreover, our findings revealed that providing bilateral tDCS including anodal tDCS on left primary motor cortex (M1) and cathodal on right M1 while conducting bimanual force control trials significantly decreased force variability and regularity at 5%MVC. Conclusion: These findings suggest that providing bilateral tDCS on M1 areas may improve bimanual force control capabilities at a relatively low targeted force level.

• 건축역사연구
• /
• 제32권1호
• /
• pp.7-20
• /
• 2023

The construction method of scaffolding structures is different from Mortise and Tenon and bucket arch structure of traditional large woodwork. It forms an independent construction system-fixing nodes with knots, a large number of diagonal braces are used to fix shelves and the structures mostly contain X-shape and triangular shape details. Simple ones include stalls, sheds, rain sheds, altars, lamp racks etc. But the scaffolding with larger scale and more complicated structure are modeled on archways, theatres and other buildings which are used in commercial and festival activities. At present, Macao, Hong Kong, Guangdong, Sichuan, Shanxi and other places in China have retained the custom of using scaffolding structures in important festival activities, but their uses, techniques and building types are slightly different from place to place. Due to building and demolishing at any time, the construction and service cycle is short. As a result, there are almost no physical objects left. We can only deduce the use and technical characteristics of ancient scaffolding skills through the colorful building styles that have been preserved with folk activities in various parts of China, the craftsmanship handed down from generation to generation by the scaffolding guild and artisans, and the description of cultural and historical materials and the mutual corroboration of visual materials.