• 패션비즈니스
• /
• 제28권3호
• /
• pp.34-47
• /
• 2024

This study aimed to enhance public awareness of the growing issue of automobile waste and promote environmental protection by developing visually appealing and innovative clothing designs. By leveraging successful examples of upcycled fashion design and products that could recycle automobile waste, this study proposed four garment designs utilizing various materials such as seat belts, leather seat fabrics, and airbags from automobile waste. Ultimately, two of these garments were produced as physical prototypes. Findings of this study are summarized as follows. First, the development of upcycled fashion products utilizing automotive waste opened new possibilities for sustainable fashion design. This approach demonstrates potential to meet demands of modem consumers who prioritize environmental values and social responsibility. Second, the study established an important foundation for understanding market acceptance and consumer perception of upcycled fashion products using automotive waste. As consumer awareness of environmental protection grows and demand for sustainable products increases, these upcycled products are likely to gain significant traction in the fashion industry.

• 공업화학
• /
• 제3권2호
• /
• pp.201-206
• /
• 1992

Annual amount of plastics waste including rubber and leather waste, generated in 1990 was about 2,600,000 tons. Amount of generation of plastics waste has rapidly increased, but fractions of recycling and incineration have gradually decreased. Recently, two-stage incinerator, consisting of gasifier and gas combustor, draws much attention in Korea. Plastics are gasified in the starved air condition in the gasifier and produced gas is fired in the combustor. Combustion of produced gas is much easier than that of solid plastics, and produces a little pollutants. Standardzation of technology and process automation are still needed, but this incineration technology is in the commercial stage. Next topic concerned with this two-stage incineration will be how to treat complex plastics waste including toxic substances generated from automobiles and household appliances. Pyrolysis, realized by indirect heating in inert atmosphere, can provide high-quality products with minimum emissions. Many plastics are easily decomposed into oil in pyrolysis conditions, which can be utilized as chemical feedstocks, or gasoline or kerosene depending on feed materials and operating conditions. This has been demonstrated in several pilot-scale tests performed in Japan, Germany, etc. Easy removal of HCl from PVC is one of the most decisive merits of pyrolysis process. But in general, further efforts should be made for the process to obtain marketability. The future of pyrolysis process depends on public concern about environmental problems and oil prices.

• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.115-121
• /
• 2017

Demands for nylon suede as an artificial leather are increasing due to its functionality and aesthetics. To achieve high value added nylon suede based on green technology, this study was carried out in order to obtain useful data for the nylon suede fabrics with eco-friendly dyeing process by a pad-steam method instead of a dip dyeing process using sulphur black dye to reduce the industrial waste of water. The dyeability of the nylon suede was investigated according to reducing temperatures, dye concentrations, and reducing agent's concentrations. Throughout the results of the CIE $L^*a^*b^*$ and Munsell values, the optimized dyeing conditions of the nylon suede using sulphur black dye are $70^{\circ}C$ of dyeing temperature, 30% o.w.f. of dye concentration, and $9g/{\ell}$ of reduction agent concentration, respectively. Furthermore washing colorfastness, light colorfastness and perspiration colorfastness were achieved in the range of 4-5 grades.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• 한국의류학회지
• /
• 제42권3호
• /
• pp.486-502
• /
• 2018

Mass-production caused by industrialization has led to environmental pollution; however, a potential solution to this problem is the Up-cycling fashion design belonging to the sustainable design category. This study analyzed the material characteristics of each brand fashion product by selecting 21 domestic Up-cycling fashion brands. The product types manufactured by domestic Up-cycling fashion brands could be divided into fashion clothing, bag, and fashion accessories. The materials used for each item included special material, waste fiber, waste leather, waste paper, and others. In the results of analyzing the material characteristics into the external characteristics and internal characteristics, the external characteristics included the durability with less abrasiveness and deformation as well as a mixture with other different materials, while the internal characteristics included a story arousing consumers' empathy, and scarcity without the same design due to the limitation of material.

• 한국환경과학회지
• /
• 제27권2호
• /
• pp.91-97
• /
• 2018

This study carried out first a component survey on the domestic waste shipped into a waste disposal facility in B city, and then heavy metal analysis of each component according to the SRF standards. Based on this, this study explored the problems with domestic waste and measures to improve them. The results are as follows. The result of the survey of physical components show that paper accounted for the largest proportion with 20.5 %~59.9 %, metals (including batteries) among incombustibles accounted for 0.0~8.3 %, other inorganic substances, glass and ceramics accounted for 0.0~43.7 % and 0.0 %~19.6 % respectively. However, the proportion of coated viny and plastics, which have high lead and cadmium content, was rather high with 2.9 %~30.9 %. This suggests the possibility that actual concentration of lead and cadmium within SRF is likely to be higher. Among the 15 components contained in the waste brought into the waste disposal facility, 10 components (food waste, textiles, vinyl, plastics, wood, rubber and leather, paper, metals, electronic substrates, and nail polish) were analyzed according to assay samples (approximately 0.1 g and 0.3 g). The result of analysis shows that the amount of Cd and Pb detected in coated vinyl for 0.109 g of assay sample was 98.6 mg/kg and 20.6 mg/kg respectively; 117.0 mg/kg and 29.0 mg/kg respectively for 0.313 g of assay sample. This is high contents exceeding the Cd standard. As for wooden component, the amount of Pb was 480.0 mg/kg for 0.3 g of assay sample. This suggests that there always exists the possibility of exceeding the exposure level of heavy metals (Cd and Pb) in SRF as long as coated wood and vinyl plastics with high contents of Pb and Cd are shipped into the waste disposal facility; and the local government and the residents need to work hard to improve the situation including development of the machine to sort electronic substrates and batteries for separate collection of the waste of coated vinyl and plastics within domestic waste.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1176-1179
• /
• 2002

This paper presents the use of a Genetic Algorithm to find the optimal layout for the placement of garment patterns on a fabric of fixed width to minimize fabric waste. We developed a program to simulate garment pieces and their layout on a fixed-width fabric. Each piece in the order book is placed with 2 possible orientations: 0 degrees and 180 degrees. The efficiency is measured by the length of fabric used after all the patterns in the order book have been laid out. A comparison is made between the placement using our proposed genetic algorithm to that made by an expert human using our simulation program. The results from our experiments on various pattern designs indicate that our genetic algorithm can effectively be used to obtain highly efficient solutions, comparable to that done by an expert while using a reasonable amount of time. The algorithm can also be adapted for use in other areas related to optimal consumption of sheet material such as metal, paper, and leather.

• 한국토양비료학회지
• /
• 제11권3호
• /
• pp.195-206
• /
• 1979

산업(産業)의 발달(發達)과 인구(人口)의 증가(增加)로 그 종류(種類)와 양(量)이 증가(增加)되고 있는 산업폐기물(産業廢棄物)은 여러가지 공해(公害)의 원인(原因)이 되고 있으며 이를 방지(防止)하고 자연(自然)을 보호(保護)하기 위(爲)한 노력(努力)은 국내(國內) 뿐만 아니라 세계적추세(世界的趨勢)임이 확실(確實)하다. 제한(制限)된 자료(資料)에서 산업폐기물(産業廢棄物)의 비료(肥料) 자원화(資源化) 특(特)히 유기질비료(有機質肥料)로의 활용(活用)에 관(關)한 가능성(可能性)과 문제점(問題点) 그리고 그 효과(效果)를 알아보고 다음과 같이 요약(要約)한다. 1. 국내(國內)에서 생산(生産)되는 산업폐기물(産業廢棄物) 20여종(余種)의 성분분석(成分分析) 결과(結果), 비료(肥料)로서 개발가능시(開發可能視)되는 것으로 주정폐액(酒精廢液), 맥주박(麥酒粕), 피혁가공(皮革加工) 폐기물(廢棄物), 합섬공장(合纖工場) 회수탑폐액(回收塔廢液) 커피박등(粕等)이 지적(指摘)되었다. 2. 도시오물(都市汚物)은 그 조성(組成)이 외국(外國)의 것과 전혀 다르므로 그 이용(利用)이 어려우나 인분뇨처리잔사(人糞尿處理殘渣)는 그 조성(組成)으로 보아 유기물(有機物)과 특히 인산자원(燐酸資源)으로서의 활용(活用)이 기대(期待)되나 중금속함량(重金屬含量)과 냄새, 인산(燐酸)의 유효화(有效化) 등(等)이 문제시(問題視)된다. 3. 아미노산발효부산물(酸醱酵副産物)은 유기물(有機物) 및 질소함량(窒素含量)으로 보아 기대(期待)가 되며 이미 개발(開發)된 유일(唯一)한 것으로 그 비효(肥效)가 논의(論議)되었다. 4. 산업폐기물(産業廢棄物)을 비료자원화(肥料資源化)함에 있어 활용상(活用上)의 공통적(共通的)인 문제점(問題点)과 비료(肥料)로써 유통(流通)될 경우의 문제점(問題点) 등(等)이 논의(論議)되었으나 환경보존(環境保存)이란 큰과제(課題)를 놓고 산업계(産業系)는 물론 토양비료학자(土壤肥料學者)들의 보다 적극적(積極的)인 관심(關心)의 집중(集中)이 요청(要請)된다.

• 생명과학회지
• /
• 제14권2호
• /
• pp.229-234
• /
• 2004

케라틴으로 구성되어 있는 우모는 도계 공장에서 부산물로 대량 배출되는 단백질 폐기물이다. 현재, 물리화학적 처리를 통하여 우모를 가축의 사료로 재활용하기 위한 방법이 시행되고 있으나 이러한 방법은 많은 단점을 가지고 있으며, 결과적으로 keratinolytic protease의 이용은 우모의 생물 공학적 처리를 위해 반드시 필요한 과정임을 알 수 있다. 본 연구에서는 우모의 생물학적 처리를 위하여 keratinolytic protease를 생성함으로서 우모를 분해할 수 있는 세균을 자연계로부터 분리한 후, 그 분류학적 위치를 검토하였다. 퇴비화중인 볏짚, 닭 가공공장 주변의 토양 및 붕괴중인 우모로부터 keratinolytic protease생성능이 우수한 5균주를 최종 선정하였다. 그중 효소 생성능과 우모 분해능이 가장 우수한 F7-1을 실험 균주로 선정하여 형태학적, 배양적 및 생화학적 특성을 조사한 결과, Bacillus sp.로 동정되었으며, Biolog system을 이용한 동정에서도 Bacillus sp.로 조사되었다. 보다 정확한 균주 동정을 위하여 16S rDNA 염기서열 분석을 수행하였으며, 그 결과 F7-1 균주는 B. megaterium과 계통진화학적으로 가장 유연 관계가 높았다.

• Advances in environmental research
• /
• 제9권2호
• /
• pp.135-150
• /
• 2020

Many industries, such as textiles, chemical refineries, leather, plastics and paper, use different dyes in various process steps. At the same time, these industrial sectors are responsible for discharging contaminants that are harmful and toxic to humans and microorganisms by introducing synthetic dyes into wastewater. Of these dyes, methylene blue dye, which is classified as basic dyes, is accepted as a model dye. For this reason, methylene blue dye was selected in the study and its removal from the water was studied. In this study, two efficient biosorbents were developed from chitosan and sunflower waste, an agro-industrial waste and modified using iron nanoparticles. The biosorption efficiency was evaluated for methylene blue (MB) dye removal from aqueous solution under various parameters such as treating agent, solution pH, biosorbent dosage, contact time, initial dye concentration and temperature. We investigated the kinetic properties of dye removal from water for Chitosan-Sunflower (CS), Chitosan-Sunflower-Nanoiron (CSN). When the wavelength of MB dye was spectrophotometrically scanned, the maximum absorbance was determined as 660 nm. For the core shell biosorbents we obtained, we found that the optimum time for removal of MB from wastewater was 60 min. The pH of the best pH was determined as 5 in the studied pH. The most suitable temperature for the experiment was determined as 30℃. SEM-EDAX, TEM, XRD, and FTIR techniques were used to characterize biosorbents produced and modified in the experimental stage and to monitor the change of biosorbent after dye removal. The interactions of the paint with the surface used for removal were explained by these techniques. It was calculated that 80% of CS and 88% of CSN removed MB in optimum conditions. Also, the absorption of MB dye onto the surface was investigated by Langmiur and Frendlinch isotherms and it was determined from the results that the removal was more compatible with Langmiur isotherm.