• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.294-303
• /
• 2018

In this study, eco-friendly natural dyeing for pig leather was explored by using onion skin which is food waste. Sodium caseinate was used as a pre-treatment agent to improve dyeability of pig leather and its effect on dye uptake was investigated according to treatment concentration. Dye uptake of the pre-treated pig leather was increased by about two times compared to untreated one at 0.2% pre-treatment concentration. Onion skin colorant imparted YR color on pig leather. After mordanting, the color of pretreated/dyed pig leather was varied from brick-red to khaki shades. However, mordanting did not improved dye uptake of the pre-treated/dyed pig leather significantly. The color-fastnesses of un-mordanted samples to light, dry cleaning, rubbing were grades 3-4, 5, and 4, respectively, which is good enough to meet all Korean Standard for Fastness of leather products. After mordanting, the light fastness of pig leather was improved to 4, 4-5 grade. The efficacy of sodium caseinate as a pre-treatment agent for pig leather was verified by improved dye uptake and good colorfastness. And, the natural dyeing of pig leather using food waste would be a significant sustainable way in terms of eco-friendliness and reuse of biomass to reduce environmental pollution.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.321-328
• /
• 2018

Wet polyurethane resin was synthesized by using polytrimethylene ether glycol prepared from 1,3-propanediol produced by fermentation from corn sugar as bio polyol and polyether-polyol(PTMG). Physical properties and cell characteristics by wet coagulation were investigated using the synthesized wet polyurethane resin. The tensile strength of wet polyurethane resin decreased with increasing content of bio polyol as copolymer polyol, but it tended to increase elongation at break and tear strength. As a result of thermal characteristic analysis, it was found that the glass transition temperature was slightly increased as the content of bio polyol increased. As a result of comparing the cell characteristics by the wet coagulation method, it was found that the shape of the cell was good when the ether polyol and the bio polyol were used alone.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.1-13
• /
• 2019

In this study, eco-friendly functional leather was developed by recycling wastes such as eel skin, marigold(Tagetas erecta l.), hinoki cypress(Chamaecyparis obtusa). The hot water extracts of marigold and hinoki cypress leaves were freeze-dried at $-80^{\circ}C$ to prepare colorant powder. The dyeing of eel leather with marigold was carried out to investigate the effects of dyeing conditions, mordanting on dye uptake, color, morphological change, and color fastness. Considering shrinkage of eel leather caused by dyeing, the optimum dyeing conditions were $60^{\circ}C$ of dyeing temperature and 60 min of dyeing time at 1:100 of bath ratio, and color of the dyed eel leather was Y to YR Munsell series. In order to prevent the degradation of leather from microbe, we conducted combination dyeing with marigold and hinoki cypress leave colorants. In this case, the combination dyed eel leathers showed excellent antimicrobial activity with above 99% bacterial reduction rate against S. aurieus and K. pneumoniae. It was confirmed that all of the dyed eel leathers were sufficient to meet the Korean Standard for color fastness of leather products. It can be applied practically for the development of eco-friendly functional leather by utilizing some useful active components extracted from plant resources and by recycling food wastes.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.69-74
• /
• 2008

In this paper, a comfort evaluation system based on a product-focused process design (PFPD) has been proposed for high comforts interior seat covers. Correlations between comforts properties and physical/thermal properties of interior seat covers were examined by combining traditional regression analysis and data mining techniques. A skin sensorial comfort of leather samples was evaluated by only human tactile sensation. The adjectives of leather car seat covers are 'Soft', 'Sticky' and 'Elastic'. Thermo-physiological comfort properties of leather samples were evaluated by only human tactile sensation. The adjectives of leather car seat covers are 'Coolness to the touch' and 'Thermal and humid'. Skin sensorial comforts of cloth samples were evaluated by only human tactile sensation. The adjectives of cloth car seat covers are 'Soft', 'Smooth', 'Voluminous' and 'Elastic'. Thermo-physiological comforts of cloth samples were evaluated by only human tactile sensation. The adjectives of cloth car seat covers are 'Coolness to the touch' and 'Thermal and humid'.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.5 no.2
• /
• pp.35-40
• /
• 1981

This study aims at finding appropriate adhesive conditions with special regard the material of 'fusible padding cloth inter ling' was frequently used for leather. As for leather material, pig suede, sheep suede were selected and drum dyed, cow split, napa have also been used. Mixed spinning non-woven fabric (polyester $50\%$, nylon $50\%$) were used as for padding cloth. Experimental appearance has been observed under the following adhesive conditions: Temperature of press were devided four levers; $120^{\circ}C$, $130^{\circ}C$, $140^{\circ}C$, $150^{\circ}C$, respectively. Adhesive time has been limited 5, 10, 15 second each. And the pressure has been conditioned as $0.2kg/cm^2$ continuously. After all this experiment, it was discovered that the material which had long contact with low temperature conditions has similar adhesive power to material that has short contact with high temperature conditions. There is a great difference according to the leather's dying process, the finishing method of the cloth, and the part of leather surface. The best condition for suede are $140^{\circ}C$, $150^{\circ}C$, at 10 seconds. and for D/D, NAPA, $130^{\circ}C$, at 10 seconds. Although the conditions of $150^{\circ}C$, at 15 seconds was possible for split, the process time can be shortened according to the increase of temperature.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.31-36
• /
• 2006

Study has been made for producing anionic surfactant using waste fleshing scraps from the leather making process through refining, esterification, sulfonation and blending processes. As a most optimum lard oil refining method, refining was carried out for 4 hours under temperature of $120^{\circ}C$ and approximately 200 mbar vacuum, which gave a recovery of more than 80% lard oil. Refined lard oil obtained thus was undergone methlyl-esterification, then sulfonated to make a degreasing agent. By methyl-esterification using lard oil, more than 85% of fatty acid and $12{\sim}13%$ of glycerine were extracted from the oil. Sulfonation of the extracted fatty acid ester lard oil has shown most optimum at $15{\sim}20%$ chlorosulfonic acid content, and the content of bonding sulfate at this time was higher than 3.5%. Finally the followed anionic surfactant having degreasing force of 80% and higher could be made by blending process.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.167-175
• /
• 2020

In this study, the optimum conditions for manufacturing PVDF nano web according to various electrospinning conditions such as solution concentration and applied voltage conditions were confirmed. The optimum spinning conditions were studied by analyzing the changes in the radioactivity of PVDF/TiO₂ nano web according to the TiO₂ content and the content of β-phase closely related to the piezoelectric properties under established conditions. As a result, it was confirmed that the concentration of the spinning solution was 20 wt%, the applied voltage was 25 kV, and the TiO₂ content was 5 phr. PVDF nano web and PVDF/TiO₂ nano web were observed morphologies through Scanning Electron Microscope(SEM) analysis. Formation of β-phase by electrospinning was confirmed by Fourier transform infrared spectroscopy(FT-IR) and X-ray Diffractometer(XRD), and the effect of the trapped nano web structure on the piezoelectric properties was investigated.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.51-58
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for leather tanning and finishing industry. For the evaluation BAT, a subcategorization for the industry considering wastewater characteristics, source equipments, raw material and so on should be suggested. Three subcategories: A) Unharing, Chrome Tan, Retan-Wet Finish, B) Chrome Tan, Retan-Wet Finish, and C) Furskins were proposed in this study. Wastewater discharged from the each category contains high concentration of COD, chrome, nitrogen and sulfide. In particular, the concentration of nitrogen from the subcategory A is significantly greater. Twenty sites were surveyed and wastewater qualities were analyzed. Therefore, six different technologies were applied to the subcategory A for the end-of-pipe treatment technology, and a technology was used in the subcategory B and C, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options for each subcategories: A) primary chemical precipitation + modified Ludzack-Ettinger process (MLE) + secondary chemical precipitation, B) chemical precipitation + typical activated-sludge process + Fenton oxidation, C) chemical precipitation + typical activated-sludge process + batch Fenton oxidation or batch activated carbon treatment were selected as the BAT, respectively.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.141-149
• /
• 2018

This study aimed to investigate the efficacy of eco-friendly leather dyeing by utilizing food wastes. Natural dyeing of eel skin was attempted using onion peels which have been used commonly for natural dyeing of textile fabrics. Eel skin is a by-product from fishery processing and is used mainly for making leather products. The colorant was extracted from onion peels in boiling water, concentrated, and freeze-dried. Dyeing of eel skin was carried out to study the effects of dyeing conditions, mordant type and mordanting method on dye uptake, color change, drape stiffness and colorfastness. The optimum dyeing conditions were $60^{\circ}C$ of dyeing temperature, 60min of dyeing time at 1:100($H_2O$ 90%: ethanol 10%) of bath ratio. The onion peels produced yellowish color on eel skin. The pre-mordanting was effective than the post-mordanting. As a result of the drape stiffness measurement, the Fe-mordanted sample was somewhat stiffer comparing to other mordanted samples. The light fastness of the non-mordant dye was excellent in 3-4 grade. Drycleaning fastness and rubbing fastness showed excellent results, but fastness was not significantly improved by mordanting.

• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.177-186
• /
• 2019

In this study, we investigated for synthetic hydrotalcite in chloroprene rubber foam. Experiments were carried out to find the optimum content ratio by controlling the contents of MgO and Hydrotalcite. Swelling test in toluene immersion was made to measure the crosslinking density of CR foams, and the cure properties were investigated with flat die rheometer and Mooney viscosity. The difference of hardness, tensile strength and elongation at break were observed after immersing in 7% NaCl or 21% NaCl solutions for a day and four days. In addition, the volume change and water content remaining in CR foam were measured after immersing NaCl solution. As content of MgO increased, the value of the cure torque tended to increase, but it was almost constant above 2phr of MgO. However, the Mooney viscosity decreased with increasing MgO content. The crosslinking density, determined by the swelling ratio, showed that the CR compound without MgO showed a higher degree of swelling. When the content of hydrotalcite/MgO was 3:2, it was the lowest volume change of CR form. Also, As the content of hydrotalcite decreased, the difference of mechanical properties before and after immersion NaCl solution increased.