• 유기물자원화
• /
• 제12권3호
• /
• pp.134-139
• /
• 2004

피혁 제조 공정별 발생 폐수중 T-N 농도를 증가시키는 오염원이 가장 많이 배출되는 공정중 하나인 탈회공정에 적용 가능한 Non-phosgene화합물을 이용하여 Carbonate계 비질소계 탈회제의 합성 및 적용공정 연구를 통하여 배출 배액에서의 T-N, BOD, COD, SS의 측정결과 탈회후 혁에서의 Ca함량, Cr함량, TS를 측정하여 탈회효율 및 크롬 탄닝혁의 물리적 특성에 미치는 영향과 배출 배액에서의 T-N, BOD, COD, SS의 농도감소효과를 확인하여 친환경 피혁제조공정 확립을 위한 기초 연구를 진행하였다.

• 환경위생공학
• /
• 제22권2호
• /
• pp.41-52
• /
• 2007

K leather industry wastewater treatment plant(advanced treatment process) was selected to evaluate effluent quality and pollutants removal efficiencies. $BOD_5$ concentration of effluent was $3.95mg/{\ell}$ and its removal efficiency was 99.8%. Also, most of other pollutants removal efficiencies were over 90% as well. And 95% reliability of effluent concentration were $106.8mg/{\ell}$ of CODmn, $86mg/{\ell}$ of SS, $72.04mg/{\ell}$ of TN that is greater than the effluent limitation, $0.98mg/{\ell}$ of ABS, $1.8mg/{\ell}$ of n-Hexane, $9.7mg/{\ell}$ of $BOD_5$ and $0.11mg/{\ell}$ of Cr.

• 청정기술
• /
• 제11권2호
• /
• pp.83-90
• /
• 2005

본 연구에서는 크롬 탄닝을 대체할 수 있는 환경친화적인 유제 공정 처리제 (폴리머계, 폴리 페놀계, 폴리 레진계)를 개발하고, 이를 제혁 공정에 적용하여 혁의 물리적 특성에 미치는 영향 및 Cr, total nitrogen, COD, SS 등의 환경영향평가로 제혁 공정의 청정화를 위한 기초 연구를 진행하였다.

• 청정기술
• /
• 제10권2호
• /
• pp.111-120
• /
• 2004

피혁 탈모 공정 폐수의 질소감소 및 황화물 감소, COD, BOD의 오염부하를 감소할수 있는 탈모공정 처리용 환경 친화적 피혁용 약품을 제조 하였다. 본 연구에서 개발한 Hair saving 공정처리제는 Urea, Mercaptan을 기본 물질로 하는 Liming agent와 Unhairing assist 제품을 제조하였다. Hair saving 공정에 처리한 결과 기존의 Hair burning 방법에 비해 회수된 모의 양이 약 2배 정도 증가하였다. 혁의 품질 및 생산성 평가의 지표인 수율을 좌우하는 Grain상태, 수축현상(Drawing)이 개선이 가능하였다. Wet Blue 및 완성원단에서의 인장, 인열 등의 물성과 Softness및 Touch 등의 가죽 본래의 천연감도 증대되는 효과가 있었다. 또한, 탈모공정후 배출 배수에서의 COD, T-N 농도가 약 50% 이상 감소 가능한 것을 확인 가능하였다.

• 한국물환경학회지
• /
• 제23권5호
• /
• pp.740-747
• /
• 2007

The advanced wastewater treatment plant of leather industry was selected to evaluated with its effluent water quality and statistical characteristics. Most of pollutants removal efficiencies were over 90% as well. And 95% reliability of effluent concentration were 106.8 mg/L of $COD_{mn}$, 72.04 mg/L of TN. However Effluent quality of TN exceeds the regulated limit. The range of coefficient of variation (CV) were between 0.18 and 2.49. Also, coefficient of reliability (COR) were between $0.03(BOD_5){\sim}0.63(COD_{mn})$ and 0.43 in terms of T-N, $Z_{l-a}$(Normalized Percentiles) value were 55.7 and 2.25 in terms of $BOD_5$ and T-N as shown in the following table.

• 환경생물
• /
• 제34권3호
• /
• pp.212-215
• /
• 2016

국내 토착종을 이용한 생태독성평가시험법 개발을 위해 동양하루살이 알을 이용하여 다양한 종류의 공장 폐수를 대상으로 생태독성평가를 수행하였다. 산업폐수는 2006년 6월에 농약, 도금, PCB, 피혁1, 피혁2의 총 5가지 제조업체로부터 원수 및 배출수를 각각 채취하였으며, 원수와 배출수는 각각 100, 50, 25, 12.5, 6.3, 3.1, 0%의 7가지 농도가 되도록 증류수로 희석하여 시험용액을 준비했다. 동양하루살이 알을 각 시험용액에 20개 씩 분주하여 $20^{\circ}C$, 광도 2,000 lux 이상의 16L : 8D 광주기로 설정된 인큐베이터 내에서 14일간 노출을 진행하였고 반복수는 4회였다. 폐수 종류별로 반수 부화농도인 EHC50 값은 Probit 분석으로 추정하였다. 각 폐수별 원수의 EHC50은 PCB를 제외한 모든 종류의 폐수에서 3.1% 미만으로 생태독성이 매우 높게 나왔으며, 배출수의 EHC50은 피혁2가 7.3%로 독성이 가장 높은 반면 농약이 58%로 독성이 가장 낮게 나왔다.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.51-58
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for leather tanning and finishing industry. For the evaluation BAT, a subcategorization for the industry considering wastewater characteristics, source equipments, raw material and so on should be suggested. Three subcategories: A) Unharing, Chrome Tan, Retan-Wet Finish, B) Chrome Tan, Retan-Wet Finish, and C) Furskins were proposed in this study. Wastewater discharged from the each category contains high concentration of COD, chrome, nitrogen and sulfide. In particular, the concentration of nitrogen from the subcategory A is significantly greater. Twenty sites were surveyed and wastewater qualities were analyzed. Therefore, six different technologies were applied to the subcategory A for the end-of-pipe treatment technology, and a technology was used in the subcategory B and C, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options for each subcategories: A) primary chemical precipitation + modified Ludzack-Ettinger process (MLE) + secondary chemical precipitation, B) chemical precipitation + typical activated-sludge process + Fenton oxidation, C) chemical precipitation + typical activated-sludge process + batch Fenton oxidation or batch activated carbon treatment were selected as the BAT, respectively.

• Carbon letters
• /
• 제11권1호
• /
• pp.1-8
• /
• 2010

The adsorption of Acid Blue 92 onto three low cost and ecofriendly biosorbents viz., cow dung ash, mango stone ash and parthenium leaves ash and commercial activated carbon have discussed in this work. The ash of all the mentioned bio-wastes was prepared in the muffle furnace at $500^{\circ}C$ and all the adsorbents were stored in an air thermostat. Experiments at total dye concentrations of 10~100 mg/L were carried out with a synthetic effluent prepared in the laboratory. The parameters such as pH and dye concentration were varied. Equilibrium adsorption data followed both Langmuir and Freundlich isotherms. The results indicate that cow dung ash, mango stone ash and parthenium leaves ash could be employed as low-cost alternatives to commercial activated carbon in wastewater treatment for the removal of dye.

• Journal of Microbiology and Biotechnology
• /
• 제11권3호
• /
• pp.355-361
• /
• 2001

A Chromate tolerant strain of Pseudomonas aeruginosa isolated from the effluent of a tannery showed significant enzymatic activity of chromate reduction. Cells grown in chromate-supplemented medium reduced 8 $\mu\textrm{g}$ chromate/mg protein/h in the presence of NADH/NADPH. The chromate reducing activity was inducible as cells pregrown in chromate showed higher chromate reduction. In contrast, the periplasmic fraction of cells gown in chromate reduce $75\%$ chromate in 4 h and the spheroplast fraction failed to do so, indicating that chromate reductase may be located in the periplasm. The presence of a 30 kDa protein in the periplasmic extracts of cells grown in the presence of chromate, but its absence of the protein in cells grown without chromate, points out a possible role of this protein in chromate reduction.

• Journal of Microbiology and Biotechnology
• /
• 제29권11호
• /
• pp.1749-1759
• /
• 2019

Aspergillus ochraceus biofilm, developed on an inert support, can produce tannase in Khanna medium containing 1.5% (w/v) tannic acid as the carbon source, at an initial pH of 5.0, for 72 h at 28℃. Addition of 0.1% (w/v) yeast extract increased enzyme production. The enzyme in the crude filtrate exhibited the highest activity at 30℃ and pH 6.0. At 50℃, the half-life (T50) was 60 min and it was 260 min at pH 6.0. In general, addition of detergents and surfactants did not affect tannase activity significantly. Tannase has potential applications in various biotechnological processes such as the production of propyl gallate and in the treatment of tannin-rich effluents. The content of tannins and total phenolic compounds in effluents from leather treatment was reduced by 56-83% and 47-64%, respectively, after 2 h of enzyme treatment. The content of tannins and total phenolic compounds in the sorghum flour treated for 120 h with tannase were reduced by 61% and 17%, respectively. Interestingly, the same A. ochraceus biofilm was able to produce tannase for three sequential fermentative process. In conclusion, fungal biofilm is an interesting alternative to produce high levels of tannase with biotechnological potential to be applied in different industrial sectors.