• Tribology and Lubricants
• /
• 제23권2호
• /
• pp.43-48
• /
• 2007

Leakage reduction through annular type labyrinth seals of steam turbine is necessary for enhancing their efficiency. In this study, modified geometry of the original combination-type-staggered-labyrinth seal has been suggested and numerical analysis for leakage prediction has been carried out for the modified-combination-type-staggered-labyrinth seal both based on bulk-flow model and using the CFD code FLUENT. The theoretical analysis based on bulk-flow model yields leakage reduction of the modified combination type staggered labyrinth seal by about 11%. Comparing with the result of Bulk-flow model analysis, the leakage result of CFD analysis shows reasonable agreement within 9.8% error.

• 한국전자파학회논문지
• /
• 제30권1호
• /
• pp.88-94
• /
• 2019

본 논문에서는 FMCW 레이다에서 강한 송신신호의 누설로 발생하는 문제들을 해결하기 위한 누설신호 상쇄기 및 상쇄기 내 탑재되는 적응형 알고리즘을 제안한다. 누설신호 상쇄기는 실시간으로 누설신호를 제거하는 적응형 구조이며, 제안하는 알고리즘은 현재 누설신호에 최적화된 예측 벡터 및 학습적응 계수를 산출하여 기존 알고리즘 대비 10 dB 이상의 상쇄효과를 보인다.

• 한국수소및신에너지학회논문집
• /
• 제27권2호
• /
• pp.230-235
• /
• 2016

The purpose of this study is to evaluate the gas leakage for a 30-inch ball valve. The ball valve was designed and manufactured for a natural gas transportation through a long-distance pipeline mainly installed in the permafrost region. The gas leakage assessment is based on the pressure testing criteria of international standards. Pressure conditions of the gas leakage test was employed 70 bar, 100 bar, and 110 bar. The amount of the gas leakage at each pressure condition was small and had a value under the pressure testing criteria, ISO 5208. Gas leakage with respect to the test pressure was predicted by the polynomial curve fitting using the experimental results. It is found that the gas leakage rate according to the pressure is proportion to a second order curve.

• 한국전산구조공학회논문집
• /
• 제36권3호
• /
• pp.165-171
• /
• 2023

건설기계와 특장차의 상부와 하부 구조를 연결하는 로터리 조인트는 축과 하우징이 회전하면서 유압을 전달하는데 오일의 유로에 누유를 방지하기 위해 여러 개의 시일이 조립된다. 시일재료는 강성이 커서 조립에 어려움이 있기 때문에 자른 후 조립하는 방법을 모색하였다. 절단면의 모양은 L형과 /형으로 하였고 유압이 작용할 때 누유 기준은 절단면에 발생하는 접촉압력으로 하였다. 시일의 구조와 재료는 이중 탄성중합체로 구성되며 강성이 큰 PE 재질만 절단한 경우에 대하여 비선형 접촉 구조해석을 수행하였다. 연구결과 절단 길이가 짧을수록 누유 방지에 유리하며 PE와 하우징이 접촉하는 윗면보다 NBR과 PE가 접촉하는 아랫면으로 누유될 가능성이 큰 것으로 나타났다.

• 한국유체기계학회 논문집
• /
• 제4권3호
• /
• pp.29-38
• /
• 2001

The floating ring seal has the ability of minimizing clearance without the rubbing phenomenon. It is often used in the turbo pump units of liquid rocket engines due to its superior leakage performance. The exact prediction of the lock-up position of the floating ring, the leakage performance, and the rotordynamic coefficients of the seal is necessary to evaluate the rotordynamic performance of the turbo pump unit. The governing equations(which are based on the Bulk-flow Model) we solved by the Fast Fourier Transform method. The lock-up position, leakage flow rate, and rotordynamic coefficients are evaluated according to the geometric parameters of the floating ring seal.

• 한국유체기계학회 논문집
• /
• 제18권1호
• /
• pp.44-50
• /
• 2015

Labyrinth seals are commonly used in various kinds of turbomachinery to reduce leakage flow. In the present 3D CFD analysis of see-through-type labyrinth air seal, the methodology of determining leakage and rotordynamic coefficients is suggested with the relative coordinate system for steady-state simulation. The leakage flow and rotordynamic forces predicted by using different solvers and turbulent models of FLUENT are compared with the results of the existing bulk-flow analysis code LABYSEAL.FOR and experiment. The present CFD result of direct stiffness(K) shows only improvement in prediction. The results of leakage and rotordynamic coefficients as well as computing time are sensitive against the used solver and turbulent model.

• 전기산업
• /
• 제15권8호
• /
• pp.73-80
• /
• 2004

• 한국유체기계학회 논문집
• /
• 제16권2호
• /
• pp.15-20
• /
• 2013

An aero-acoustic performance analysis method of regenerative blower is developed as one of the FANDAS codes. The aerodynamic performance of regenerative blower is predicted by using momentum exchange theory coupled with pressure loss and leakage flow models. Based on the performance prediction results, the noise level and spectrum of regenerative blower are predicted by discrete frequency and broadband noise models. The combination of the performance and the noise prediction methods gives aero-acoustic performance map and noise spectrum analysis results, which are well-agreed with the actual measurement results within a few percent relative error.

• 한국재료학회지
• /
• 제13권1호
• /
• pp.11-17
• /
• 2003

DC characteristics of recessed gate 4H-SiC MESFET were investigated using the device/circuit simulation tool, PISCES. Results of theoretical calculation were compared with the experimental data for the extraction of modeling parameters which were implemented for the prediction of DC and gate leakage characteristics at high temperatures. The current-voltage analysis using a fixed mobility model revealed that the short channel effect is influenced by the defects in SiC. The incomplete ionization models are found out significant physical models for an accurate prediction of SiC device performance. Gate leakage is shown to increase with the device operation temperatures and to decrease with the Schottky barrier height of gate metal.

• 대한기계학회논문집B
• /
• 제27권12호
• /
• pp.1655-1666
• /
• 2003

It is experimentally well-known that high anisotropies of the turbulent flow field are dominant inside the tip leakage vortex, which is attributable to a substantial proportion of the total loss and constitutes one of the dominant mechanisms of the noise generation. This anisotropic nature of turbulence invalidates the use of the conventional isotropic eddy viscosity turbulence models based on the Boussinesq assumption. In this study, to check whether an anisotropic turbulence model is superior to the isotropic ones or not, the results obtained from the steady-state Reynolds averaged Navier-Stokes simulations based on the RNG k-$\varepsilon$ model and the Reynolds stress model (RSM) are compared with experimental data for two test cases: a linear compressor cascade and a forward-swept axial-flow fan. Through this comparative study of turbulence models, it is clearly shown that the RSM, which can express the production term and body-force term induced by system rotation without introducing any modeling, should be used to predict quantitatively the complex tip leakage flow, especially in the rotating environment.