• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.7-8
• /
• 2011

Basically, the lattice mismatch between film and substrate can make those BiFeO3(BFO) films distorted with strain structure. BFO phase can be stabilized on LaAlO3(LAO) represents the example of a multiferroic with giant axial ratio. Its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion and related to the rotation of the oxygen octahedra. In this study, we show that phases with a tetragonal-like epitaxial BFO films can indeed be ferroelectric and also can be stabilized via epitaxial growth onto LAO. Recent reports on epitaxial BFO films show that the crystal structure changes from nearly rhombohedral ("R-like") to nearly tetragonal("T-like") at strains exceeding approximately -4.5%, with the "T-like" structure being characterized by a highly enhanced c/a ratio. While both the "R-like" and the "T-like" phases are monoclinic, our detailed x-ray diffraction results reveal asymmetry change from MA and MC type, respectively. By applying additional strain or by modifying the unit cell volume of the film by substituting Ba for Bi, the monoclinic distortion in the "T-like" MC phase is reduced, i.e. the system approaches a true tetragonal symmetry. There are two different M-H loops for $Bi_{1-x}Ba_xFeO_{3-{\delta}}$(BBFO) and BFO films on SrTiO3(STO) & LAO substrates. Along with the ferroelectric characterization, these magnetic data indicate that the BFO phase stabilized on LAO represents the first example of a multiferroic with giant axial ratio. However, there is a significant difference between this phase and other predicted ferroelectrics with a giant axial ratio: its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion. Therefore, in going from bulk to highly-strained films, a phase sequence of rhombohedral(R)-to-monoclinic ["R-like" MA-to-monoclinic, "T-like" MC-to-tetragonal (T)] is observed. This sequence is otherwise seen only near morphotropic phase boundaries in lead-based solid-solution perovskites (i.e. near a compositionally induced phase instability), where it can be controlled by electric field, temperature, or composition. Our results show that this evolution can occur in a lead-free, stoichiometric material and can be induced by stress alone. Those major results are summarized as follows ; 1) Ba-doping increases the unit cell volume, 2) BBFO on LAO can be fully strained up to x=0.08 as a strain limit (Fig. 1), 3) P(E) & M(H) properties can be tuned by the variation of composition, strain, and film thickness.

• Journal of Environmental Science International
• /
• v.14 no.12
• /
• pp.1119-1127
• /
• 2005

The management of data on biological diversity is presently complex and confusing. This study was initiated to construct a database so that such data could be stored in a data management, and analysis instrument to correct the problems inherent in the current incoherent storage methods. MySQL was used in DBMS(DataBase Management System), and the program was basically produced using Java technology Also, the program was developed so people could adapt to the requirements that are changing every minute. We hope this was accomplished by modifying easily and quickly the advanced programming technology and patterns. To this end, an effective and flexible database schema was devised to store and analyze diversity databases. Even users with no knowledge of databases should be able to access this management instrument and easily manage the database through the World Wide Web. On a basis of databases stored in this manner, it could become routinely used for various databases using this analysis instrument supplied on the World Wide Web. Supplying the derived results by using a simple table and making results visible using simple charts, researchers could easily adapt these methods to various data analyses. As the diversity data was stored in a database, not in a general file, this study makes the precise, error-free and high -quality storage in a consistent manner. The methods proposed here should also minimize the errors that might appear in each data search, data movement, or data conversion by supplying management instrumentation on the Web. Also, this study was to deduce the various results to the level we required and execute the comparative analysis without the lengthy time necessary to supply the analytical instrument with similar results as provided by various other methods of analysis. The results of this research may be summerized as follows: 1)This study suggests methods of storage by giving consistency to diversity data. 2)This study prepared a suggested foundation for comparative analysis of various data. 3)It may suggest further research, which could lead to more and better standardization of diversity data and to better methods for predicting changes in species diversity.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.6
• /
• pp.1-19
• /
• 2017

This study set out to identify problems with amphibian habitation by the wetland types and improve their habitation environment in urban forest wetlands, thus creating a habitat for amphibians. Study site include forest swamps in Jatjul Park as well as Yeoji neighborhood Park in Guro-gu, and in Choansan neighborhood Park in Dobong-gu. The forest swamp in Jatjul Park gets its water from Mt. Maebong and it is a former escalated farmland-turned wetland. The swamp area is $2,500m^2$, a forest zone and a landscape planting site are 83.27% and 6.70% each. Target species Seoul pond frogs are inseparable from rice fields because they live in a short radius of and lay eggs in or near paddy fields, and Rana nigromaculata have similarities with Rana plancyi chosenica in choosing their habitats. There was need for paths that would lead to other paths so amphibians would spread to other parts of the forest and for measures to secure open water. Modifying a variety of routes for water, human and animals along with building a buffer to keep the core habitation zones were required. The forest swamp in Yeonji neighborhood Park used to be a water reservoir on the foot of Mt. Gunji. The swamp area is $1,980m^2$, a forest zone and farmland account for 80.61% and 4.88% each. Non-point pollutants from upstream along run into the subject forest marsh, bare ground on the around swamp and steep stone embankments obstructed amphibians. Target species was Bufo gargarizans that live in forests and edges of hills and spawn in deep water. The forest swamp in Choansan neighborhood Park gets its water from Mt. Choan and it is close to its water source that it is a mountain stream forest wetland. The basin and the swamp are $35,240m^2$ and $250m^2$ in size respectively. A forest zone accounts for 90.20%, high stone embankments laid in refurbishing the valley obstruct amphibians and there is water shortage in times of droughts. Target species were Rana coreana, Rana dybowskii and Hynobius leechii that live in mountain valleys, streams and wetlands and lay eggs in forest marshes and rocks in valleys. Looking into the three swamps of amphibian habitation, I came to conclusions that those wetlands were suitable for their amphibians but man-made facilities blocked their corridors leading to other corridors and even killed off target species in some parts of those swamps by destroying those parts. Amphibians live in water, on ground and underground at different stages of life. Hence, we should take this fact into consideration when planning their habitats and design core habitation zones, buffers zone and use zones accordingly. Buffer zones ought to be between core habitation zones and surrounding trees. Aiming at protecting core habitation zones, buffers should be in harmony with habitation zones. Use zones should be minimized in size and not in direct contact with core habitation zones.

• International Journal of Human Ecology
• /
• v.2 no.1
• /
• pp.95-110
• /
• 2001

The purpose of this research is to analyze how appropriately the sizing of domestically produced children's wear compares to children's sizes; it is based on an anthropometric survey conducted in 1998. By discovering and understanding discrepancies between the sizing system of children s wear and the real size of children, this study aims to suggest solutions that will lead to increased comfort and more suitable fitting in children's clothes. This research analyzes and compares 'the extent of growth between age groups' with 'the difference in sizing system in use by manufacturers'. The study focused on aged 4 to 12 children, who are usually divided in two groups; primary students and toddlers. In total, seven sizes were selected: bust, waist, and hip (which are girth sizes), and height, back neck to waist (top length), sleeve length, and waist to ankle (slacks length) as representing length. The results of this research are analyzed by basing on the actual increments between the sizes of children's wear in certain basic items rather than sizes themselves because each size quite differed according to companies, items and designs. Significantly, the increase in the sizing was not as great as the average biennial growth rate of children. The consequences are poorer fit and unsuitable representative value for each age group because the actual sizes of children increasingly differ from the sample size. Observing the increments in several sizes, we found that 81.8% of the companies used the certain and equal increases for grading sizes in sleeve length, waist, and bust. In addition, 72.7% of the companies adopted the same increments between sizes in height and hip girth, and 63.6% also chose equal increments in T-shirt length for making smaller or bigger sizes from the sample size. However, sleeve length and pant length were the components that displayed the most varied sizing. Interestingly, the few companies that used different increments between size groups, adopted the change only between one or two size groups, instead of all sizes. In conclusion, this research reveals the unsuitability of the current sizing system and the necessity to increase consumer confidence in the size tags on children's wear by modifying the system to reflect the actual growth of children. The results can also contribute to future study on the development of a new and more accurate sizing system for children's wear.

• Journal of Plant Biotechnology
• /
• v.38 no.4
• /
• pp.251-257
• /
• 2011

Rice is the most important crop as a model plant for functional genomics of monocotyledons. Rice is usually transformed using Agrobacterium tumefaciens. However, the transformation efficiency using previous method is still low. In this study, we established a new method by modifying the general Agrobacterium protocol especially in the inoculation and co-cultivation step. We directly inoculated Agrobacterium containing a CIPK15 gene under the control of CaMV 35S promoter and NOS terminator in the pCAM1300 vector into the pre-soaked seeds in N6D media for 24 hours. After 7 days of culture at $25^{\circ}C$, calli were formed on seeds cultured on the co-cultivation medium containing an antioxidant compound (1 mM dithiothreitol) and of Agrobacterium growth-inhibiting agent (3 mg/L silver nitrate). We obtained 35 and 22 transgenic plants in rice cultivars, Gopumbyeo and Ilpumbyeo, with increase of transformation efficiency by 30.4% and 22.6%, respectively compared to the general transformation method. The new method in this study would lead to reduction of substantial labor and time to generate transgenic plants.

• Journal of Plant Biotechnology
• /
• v.40 no.1
• /
• pp.37-42
• /
• 2013

Rice is one of the most important cereal crops as a model plant for functional genomics of monocotyledons and usually transformed using Agrobacterium tumefaciens. However, the transformation's process using previous method is still time consuming and uneconomical, low efficiency. In this study, we established a new method by modifying the general Agrobacterium protocol especially in the infection and co-cultivation, Agrobacterium elimination, infected calli's selection steps using liquid media. We directly inoculated Agrobacterium containing a ZjLsL gene under the control of constitutive promoter into the 1- to 3-week-old rice calli derived from mature seeds. After 3 days of co-cultivation, the infected calli were transferred onto liquid media of Agrobacterium elimination and calli's selection for 3 days. The calli were transferred to calli's growth solid media for 14 days and then the calli transferred to shoot induction and root induction media. Putative transformants were initially selected on the medium containing phosphinothricin, and the PAT protein verified by PAT strip test. This method in this study would lead to reduction of substantial labor and time to generate transgenic plants.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1264-1274
• /
• 1999

본 논문에서는 분산된 클록들을 주기적으로 동기화 시키는 분산 실시간 시스템에서 시간적 제약을 만족시키기 위한 정적/동적 시간 제약(timing constraint) 변환 기법을 제안한다. 전형적인 이산클록동기화(discrete clock synchronization) 알고리즘은 클록의 값을 순간적으로 조정하여 클록의 시간이 불연속적으로 진행한다. 이러한 시간상의 불연속성은 시간적 이벤트를 잃어버리거나 다시 발생시키는 오류를 범하게 한다.클록 시간의 불연속성을 피하기 위해 일반적으로 연속클록동기화(continuous clock synchronization) 기법이 제안되고 있지만 소프트웨어적으로 구현되면 많은 오버헤드를 유발시키는 문제점이 있다. 본 논문에서는 시간적 제약을 동적으로 변환시키는 DCT (Dynamic Constraint Transformation) 기법을 제안하였으며, 이를 통해 기존의 이산클록동기화 알고리즘을 수정하지 않고서도 클록 시간의 불연속성에 의한 문제점들을 해결할 수 있도록 하였다. 아울러 DCT에 의해 이산클록동기화 하에서 생성된 태스크 스케쥴이 연속클록동기화에 의해 생성된 스케쥴과 동일함을 증명하여 DCT의 동작이 이론적으로 정확함을 증명하였다.또한 분산 실시간 시스템에서 지역 클록(local clock)이 기준 클록과 완벽하게 일치하지 않아서 발생하는 스케쥴링상의 문제점을 다루었다. 이를 위해 먼저 두 가지의 스케쥴링 가능성, 지역적 스케쥴링 가능성(local schedulability)과 전역적 스케쥴링 가능성(global schedulability)을 정의하고, 이를 위해 시간적 제약을 정적으로 변환시키는 SCT (Static Constraint Transformation) 기법을 제안하였다. SCT를 통해 지역적으로 스케쥴링 가능한 태스크는 전역적으로 스케쥴링이 가능하므로, 단지 지역적 스케쥴링 가능성만을 검사하면 스케쥴링 문제를 해결할 수 있도록 하였고 이를 수학적으로 증명하였다.Abstract In this paper, we present static and dynamic constraint transformation techniques for ensuring timing requirements in a distributed real-time system possessing periodically synchronized distributed local clocks. Traditional discrete clock synchronization algorithms that adjust local clocks instantaneously yield time discontinuities. Such time discontinuities lead to the loss or the gain of events, thus raising serious run-time faults.While continuous clock synchronization is generally suggested to avoid the time discontinuity problem, it incurs too much run-time overhead to be implemented in software. We propose a dynamic constraint transformation (DCT) technique which can solve the problem without modifying discrete clock synchronization algorithms. We formally prove the correctness of the DCT by showing that the DCT with discrete clock synchronization generates the same task schedule as the continuous clock synchronization.We also investigate schedulability problems that arise when imperfect local clocks are used in distributed real-time systems. We first define two notions of schedulability, global schedulability and local schedulability, and then present a static constraint transformation (SCT) technique. The SCT ensures that it is sufficient to check the schedulability of a task locally in a node with a local clock, since the global schedulability of the task is derived from its local schedulability through SCT. We formally prove the correctness of SCT.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.637-648
• /
• 2009

As the cost of disks decreases, PCs are soon expected to be equipped with a disk of 1TB or more. Assuming that a single person generates 1GB of data per month, 1TB is enough to store data for the entire lifetime of a person. This has lead to the growth of researches on lifelog management, which manages what people see and listen to in everyday life. Although many different lifelog management systems have been proposed, including those based on the relational data model, based on ontology, and based on file systems, they have all advantages and disadvantages: Those based on the relational data model provide good query processing performance but they do not support complex queries properly; Those based on ontology handle more complex queries but their performances are not satisfactory: Those based on file systems support only keyword queries. Moreover, these systems are lack of support for lifelog group management and do not provide a convenient user interface for modifying and adding tags (metadata) to lifelogs for effective lifelog search. To address these problems, we propose a lifelog management system based on the relational data model. The proposed system models lifelogs by using the relational data model and transforms queries on lifelogs into SQL statements, which results in good query processing performance. It also supports a simplified relationship query that finds a lifelog based on other lifelogs directly related to it, to overcome the disadvantage of not supporting complex queries properly. In addition, the proposed system supports for the management of lifelog groups by providing ways to create, edit, search, play, and share them. Finally, it is equipped with a tagging tool that helps the user to modify and add tags conveniently through the ion of various tags. This paper describes the design and implementation of the proposed system and its various applications.