• 자연과학논문집
• /
• 제5권2호
• /
• pp.19-24
• /
• 1992

대전시 도로변의 대기오염 정도를 알아보기 위하여 주요 간선도로변, 외곽의 도로변 및 보문산의 가로수 중 버즘나무 (Platanus orientalis), 은행나무 (Ginkgo biloba) 및 백합나무(Lirodendron tulipifera) 를 선택하여 그 수피내의 납과 카드뮴의 축적량을 측정하고 교통량과의 관계를 분석하였다. 수피내의 납 축적량은 가로수의 수피에서는 2-1109ppm 으로 보문산 지역의 수피내의 함량이 5-11ppm 인데 비하여 지역에 따라 차이도 심하고 농도가 높았다. 또한 교통량과의 관계는 차량통행량의 증가에 따라, 특히 병목 현상이 심한 지역에서 납의 함량이 높게 나타났는데, 차량 통행량 증가에 따라 수피내의 중금속의 최대 축적량이 비례적으로 증가하였다. 이에 비하여 가로수 수피내의 카드뮴 축적량은 보문산 수피내의 축적량보다 다소 높았으나 변이가 적게 나타났다.

• 박물관보존과학
• /
• 제8권
• /
• pp.81-95
• /
• 2007

국립중앙박물관 보존과학팀에서는 금속 유물의 보존처리 과정에서 얻은 청동 녹의 과학적 연구로서 납동위원소비 데이터를 구축하고 이로부터 청동기 원료의 산지와 관련된 연구를 수행하고자 한다. 청동 녹의 납동위원소비 분석을 위한 분석 장비는 기초과학지원연구소의 열이온화질량분석기(Thermal ionization mass spectromete ; TIMS)를 활용하였다. 본 연구의 일환으로 2007년에는 낙랑시대의 청동기 11 점, 통일신라시대의 청동화형접시 등 6점, 고려시대 동종에서 4점의 청동 녹을 입수하였고 납동위원소비를 분석하였다. 기 분석한 한국, 중국 및 일본의 방연석 납동위원소비 데이터를 기초로 산지를 추정하였다. 앞으로 보존과학팀에서는 금속 유물의 보존처리를 수행하면서 얻을 수 있는 청동 녹을 최대한 수집하고 분석하여 이들 자료를 모아 유물의 종류별, 시기별, 지역별 산지연구를 위한 자료로 활용할 것이다.

• 대한임상독성학회지
• /
• 제19권2호
• /
• pp.127-132
• /
• 2021

Purpose: It is known that the most common cause of gas poisoning in Korea is suicide attempts by burning ignition coals. Ignition coals are made from waste wood, and studies have been reported that heavy metals are emitted when this coal is burned. However, there was no study on how much heavy metal poisoning occurs in the human body through this, so this study was planned to find out whether the concentration of heavy metals in the blood increased in patients exposed to ignition coal combustion. Methods: From April 2020 to April 2021, blood lead, mercury, and cadmium concentrations were investigated in carbon monoxide poisoning patients who visited one regional emergency medical center in Seoul, and their association with exposure time, source of poisoning, and rhabdomyolysis were investigated. Results: During the study period, a total of 136 carbon monoxide poisoning patients were tested for heavy metals, and 81 cases of poisoning by ignition coal were reported. When comparing poisoning caused by combustion of ignition coal and other substances, there was no difference in the concentrations of lead, mercury, and cadmium in the blood, and there was no difference in the number of patients above the reference range. However, the patients exposed to more than 5 hours of ignition coal gas exposure are more frequent than those in the group less than 5 hours in lead (51.4% vs. 23.9%, p=0.012). Conclusion: Compared to poisoning with other combustible substances, the blood concentration of lead, mercury, and cadmium does not increase further in patients with gas poisoning by ignition coal. However, prolonged exposure may result in elevated levels of lead.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권6호
• /
• pp.82-91
• /
• 2012

The heavy metal effects on the degradation of fluorene by Sphingobacterium sp. KM-02 was determined in liquid cultures. The results showed that 10 mg/L cadmium, copper, zinc, and lead not only affected the growth of KM-02 with fluorene but also the ability of growing or resting cells to degrade this compound. Growth and fluorene degradation were strongly inhibited by cadmium and copper at 10 mg/L, while the inhibitory effect of zinc and lead at the same concentration or at 100 mg/L were not significant. In contrast, arsenic did not affect degradation or growth, even at very high concentrations of 100 mg/L. Subsequent analyses additionally revealed that concentrations of arsenic remained unchanged following incubation, while those of cadmium and copper decreased significantly.

• Advances in environmental research
• /
• 제7권3호
• /
• pp.225-237
• /
• 2018

The sorption of metal ions with low-cost adsorbents plays an important role in sustainable development. In the present study, the efficacy of sugarcane bagasse, rain tree fruits (samaneasaman), banana stem and their mixtures, used as bio-sorbents, in the removal of Cu(II) and Pb(II) ions from aqueous solution is evaluated. Batch studies are conducted, and residual ions were measured using Inductively Coupled Plasma (ICP)-atomic spectrometer. Effect of pH, initial metal ion concentration, reaction time and adsorbent dosage are studied. The Pb(II) removal efficiency was observed to be 97.88%, 98.60% and 91.74% for rain tree fruits, banana stem and a mixture of adsorbents respectively. The highest Cu(II) ion removal was observed for sugarcane bagasse sorbent with an efficiency of 82.10% with a pH of 4.5 and a reaction time of 90 min. Finally, desorption studies were carried out to study the leaching potential of adsorbent, and it was found that the adsorbent is stable in water than the other leaching agents such as HCl, ammonium acetate, Sodium EDTA. Hence, these adsorbents can be effectively used for the removal of these heavy metals.

• Journal of Advanced Marine Engineering and Technology
• /
• 제9권1호
• /
• pp.74-88
• /
• 1985

The wear becomes the most complicated cause of making various machineries short lives. In the studies by many scholors so far, the accurate and perfect methods to eliminate it completely are not found yet owing to many affected factors. On this view point of Depositional Wear, the wear test with seven different specimens from the part of frequent usage of which are carbon steel, nickel, copper, aluminum, zinc, lead and tin was attempted to make clear the relation between the wear of different metals and their melting point, crystal structure, sliding speed, load and lattice factors. The results of this study are summerized as follows; 1) Worn amount of each metal is maximum when each metal is same quality. 2) The easier becomes the the formation of solid solution in the course of friction proceeding, the more it results in worn amount of each metal. 3) The samer is each metal in crystal structure as well as lattice factor, the more it results in worn amount of each metal. These results might be of use in designing machineries, selecting materials and operating machineries.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1369-1375
• /
• 2004

For many years and primarily for economical reasons, Dissimilar Metal Welds have been used as transition joints in a variety of equipment and applications. But Dissimilar Metal Welds have several fabrication and metallurgical drawbacks that can often lead to in-service failures. For example, the most pronounced fabrication faults are hot cracks. Laser welding techniques have been characterised for various materials. In this paper, the laser weldability of STS304 stainless steel and SM45C at dissimilar metal welds using a continuous wave Nd：YAG laser are experimentally investigated. An experimental study was conducted to determine effects of welding parameters, on eliminating or reducing the extent welding zone formation at dissimilar metal welds and to optimize those parameters that have the most influence parameters such as focus length, power, beam speed, shielding gas, and wave length of laser were tested

• 소성∙가공
• /
• 제3권2호
• /
• pp.167-177
• /
• 1994

Most of bulk metal forming processes may be limited by ductile fracture such as surface or internal cracks developing in the workpiece. It is important to identify the conditions within the deforming workpiece which may lead to fracture, and then it is possible to modify the forming processes to produce sound and reliable product. This paper suggests the scheme to simultaneously accomplish prediction of fracture initiation and analysis of deformation in metal forming processes. The Cockcroft-Latham criterion which is successfully applied to a variety of loading situations is used in the present investigation to estimate whether fracture occurs during the deformation process. The numerical predictions and experimental results of two types of metal forming process are compared, axisymmetric extrusion and simple upsetting. The proposed scheme has successfully predicted the fracture initiation found experimentally.

• 한국환경과학회지
• /
• 제17권9호
• /
• pp.943-947
• /
• 2008

For the purpose of safety identification, the concentrations of heavy metals in seaweeds collected from Busan Gijang coastal area were investigated. The average concentration of metals had a level of as high as the order of manganese (2.76 ppm)>zinc(2.11 ppm)>copper(0.59 ppm)>arsenic (0.092 ppm)>lead(0.06 ppm)> mercury(0.03 ppm)>cadmium(0.026 ppm). The contents of manganese and zinc were highly detected from P. elliptica, copper and mercury from agar, cadmium from sea mustard and arsenic from wild sea mustard, respectively. The metal contents of seaweeds varied with kinds of samples, but high level for the safety can be found in these samples. Because P. elliptica had shown a clear selectivity for both manganese and zinc, this seaweed could be useful as a bioindicator for these two metal pollution.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.17-26
• /
• 2005

Dissimilar-metal welds(DHWs) are used widely in various industrial applications due to the pratical importance from the technical and economic aspect. However, DMWs have several fabricative and metallurgical drawbacks that can often lead to in-service failures. For example, the most pronounced fabrication faults are hot cracks. Recently, DMWs have used the various of heat source to decrease such as faults. In this paper, the weldability on dissimilar metal welds of Austenite stainless steel and Low carbon steel using a continuous wave Nd:YAG laser was experimentally investigated. Experiments were conducted to determine effects of welding parameters, on eliminating or reducing the extent welding zone formation at dissimilar metal welds and to optimize those parameters that have the most influence parameters such as focus length, power, beam speed, shielding gas, and wave length of laser.