• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.211-219
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces stric시y related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials. In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.85-89
• /
• 1990

In this paper, the design of boiler drum level control system is important in power plant is studied. First of all, pressure compansation of level for boiler drum which is close tank with high temperature and pressure is designed. Physical penomena of drum level are analysed, controllers are designed, and simulation results are shown. Designed controller have a good performance compare with PI controller. Predictive controller of boiler drum level control system is proposed. It will be good system for boiler drum level control to reject the disturbance according to lead increase or decrease.

• Journal of Information Technology Services
• /
• v.10 no.4
• /
• pp.191-204
• /
• 2011

Recently, many software companies are trying to improve the software quality and project outcome with more costs and efforts in development time. In the software convergence and integration environments, it is required efforts to gain high quality of software. In other words, it is required to utilize software engineering knowledge and technology for higher software quality and better software project productivity. The Software development productivity can be varied by software process capability according to building a framework for software development, selection and use of appropriate technology, human resource management. Software process capability will influence software project outcome which is the general opinion. This study provides empirical evidence about software engineering efforts and investment approach to lead software project performance. We measured the software engineering efforts by SW engineering level and analyzed the corelation between software engineering level and schedule deviation. And, we verified that this performance is affected by the size of software company. As a result, software process capability is important to build a infrastructure and develop systematically software project. The higher software engineering level can lead to improved software project performance.

• Journal of Environmental Health Sciences
• /
• v.32 no.1 s.88
• /
• pp.8-18
• /
• 2006

The aim of this study is to evaluate the emission characteristics of mercury, lead, arsenic, and selenium from medium size municipal solid waste incinerators(MSWIs) in Korea. The concentrations of mercury, lead, arsenic, and selenium emitted from medium size MSWI stack were $2.67\;{\mu}g/Sm^3,\;0.38\;mg/Sm^3,\;1.33\;{\mu}g/Sm^3,\;0.28\;{\mu}g/Sm^3$, respectively. The concentration levels of mercury, lead, arsenic in flue gas from medium size MSW incinerator stacks selected were nearly detected under the Korea criteria level. Removal efficiencies of mercury, lead, arsenic, and selenium in waste heat boiler(WHE) and cooling tower(CT) were $90.36\%,\;69.76\%,\;43.04\%,\;40.64\%$, respectively. In general, the removal efficiencies of mercury and lead in WHE were higher than those of arsenic and selenium in WHE. Emission gas temperature reduction from waste heat boiler(WHB) and cooling tower(CT) can control mercury and lead of medium size MSWIs. To evaluate the relationship between mercury, lead, arsenic, selenium of fly ash and those of flue gas, it was carried out to correlation analysis of each metal concentration in the fly ash and in the flue gas from medium size MSWIs. From the correlation analysis, the coefficients of mercury, lead, arsenic, and selenium were 0.61, -0.38, 0.87, 0.28, respectively. The results of correlation analysis revealed that it should be highly positive to the correlation coefficients of mercury and arsenic in the fly ash and those of the flue gas emitted from medium size MSWIs. As it were, the concentrations of mercury and arsenic of flue gas from medium size MSWIs are high unless mercury and arsenic in fly ash are properly controlled in dust collection step in medium size MSWIs. It was also concluded that mercury, lead, arsenic, and selenium from MSWIs stacks could be controlled by waste heat boiler(WHE) and dust collecting step in medium size MSWIs.

• Journal of Nutrition and Health
• /
• v.19 no.3
• /
• pp.211-223
• /
• 1986

In this experiment forty-eight Sprague Dawley male rats were chosen and used in order to measure the growth rates and to see the effects of lead acumulation in their organs resulting from variously controlled lead protein diet. Protein sources were casein and isolated soyprotein (ISP), and each source was divided into three groups : 7% low protein [LP], 20% standard protein (SP) and 40% high protein (HP) groups. The six experimental groups were given lead acetate(25 mg/kg B.W.) and six control groups were given sodium chloride by oral administration 6 times a week for weeks. The results from this experiment were summeraized as following ; 1) Food consumption, weight gain, organ weight and food efficiency ; Lead acetate administration with protein source had no effects on food consumption, weight gain and organ weight . By their different levels of protein, food consumption of LP group was less the that of SP and HP groups after 3 weeks, weight gain of LP group was less than that of SP and HO groups after 1 weeks. The organ weight in LP group was significantly lower than SP and HP groups except teeth and adrenal s. Effect of lead acetate administration on food efficiency have significantly lower in LP-ISP diet and HP -casein diet than other groups only first week. By their different levels LP group showed significantly lower than SP group until 3 weeks. 2) Hematopoietic effect ; The hematopoieteic effect was not influencec by lead acdtate administration and protein source. But the LP group showed a significantly lowe hematopoietic effect than the SP, HP, groups. 3) Accumulation of lead in the liver, kidney, teeth by protein source showed no significantly differences. Accumulation of lead in blood, heart of LP group, spleen of LP and HP groups. femur of SP and HP groups fed with casein diet groups were significantly higher than fed with ISP diet groups. By their different levels of group showed generally higher than SP and HP groups. But accumulation of lead in teeth of HP group was high also.

• Journal of Nutrition and Health
• /
• v.19 no.4
• /
• pp.211-223
• /
• 1986

In this experiment forty-eight Sprague Dawley male rats were chosen and used in order to measure the growth rates and to see the effects of lead acumulation in their organs resulting from variously controlled lead protein diet. Protein sources were casein and isolated soyprotein (ISP), and each source was divided into three groups : 7% low protein [LP], 20% standard protein (SP) and 40% high protein (HP) groups. The six experimental groups were given lead acetate(25 mg/kg B.W.) and six control groups were given sodium chloride by oral administration 6 times a week for weeks. The results from this experiment were summeraized as following ; 1) Food consumption, weight gain, organ weight and food efficiency ; Lead acetate administration with protein source had no effects on food consumption, weight gain and organ weight . By their different levels of protein, food consumption of LP group was less the that of SP and HP groups after 3 weeks, weight gain of LP group was less than that of SP and HO groups after 1 weeks. The organ weight in LP group was significantly lower than SP and HP groups except teeth and adrenal s. Effect of lead acetate administration on food efficiency have significantly lower in LP-ISP diet and HP -casein diet than other groups only first week. By their different levels LP group showed significantly lower than SP group until 3 weeks. 2) Hematopoietic effect ; The hematopoieteic effect was not influencec by lead acdtate administration and protein source. But the LP group showed a significantly lowe hematopoietic effect than the SP, HP, groups. 3) Accumulation of lead in the liver, kidney, teeth by protein source showed no significantly differences. Accumulation of lead in blood, heart of LP group, spleen of LP and HP groups. femur of SP and HP groups fed with casein diet groups were significantly higher than fed with ISP diet groups. By their different levels of group showed generally higher than SP and HP groups. But accumulation of lead in teeth of HP group was high also.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.6
• /
• pp.1-10
• /
• 2001

In this study, the horizontal loading tests of 10ton and 200ton capacity of LRB(lead-rubber bearing) were performed for the evaluation of the dynamic properties of the LRB. It is noted from the test results that dynamic properties of the LRB are dependent on the loading frequency, vertical load and shear strain. A Slender bearing subjected to large deformation will tend to develop plastic hinges in the end regions of the lead plug which will cause the failure of the lead plug. It is recommended that the appropriate mechanical properties of LRB considering the level of structural response and input ground motion should be used in the design of base isolated structures.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.535-542
• /
• 1995

Monitoring of lead concentration in the ambient alt was performed in Kyung Hee University-Suwon Campus over a period of 5 year from November 1989 to September 1994 using a cascade impactor having 9 size stages. Lead level was analyzed by x-ray fluorescence. The lead levels have been extensively examined to identify annual trends, seasonal variations, and size distribution of lead concentration. Even though consumption of leaded gasoline has been decreased, the levels have not significantly changed during the sampling period. Probably other sources like fossil fuel emission and refuse incinerator will be potential contributors. The seasonal variation showed that Pb concentration significantly increased in the winter season and decreased in the summer season. The size distributions of Pb were observed to be unimodal distribution of the 1.1~2.1 $mu extrm{m}$ sixte ranges in the winter and 0.65~1.1 ${\mu}{\textrm}{m}$ in the summer.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.149-149
• /
• 1995

Monitoring of lead concentration in the ambient alt was performed in Kyung Hee University-Suwon Campus over a period of 5 year from November 1989 to September 1994 using a cascade impactor having 9 size stages. Lead level was analyzed by x-ray fluorescence. The lead levels have been extensively examined to identify annual trends, seasonal variations, and size distribution of lead concentration. Even though consumption of leaded gasoline has been decreased, the levels have not significantly changed during the sampling period. Probably other sources like fossil fuel emission and refuse incinerator will be potential contributors. The seasonal variation showed that Pb concentration significantly increased in the winter season and decreased in the summer season. The size distributions of Pb were observed to be unimodal distribution of the 1.1∼2.1 $mu extrm{m}$ sixte ranges in the winter and 0.65∼1.1 ㎛ in the summer.

• The Korean Journal of Physiology
• /
• v.11 no.2
• /
• pp.63-66
• /
• 1977

Motor vehicles are the major source of environmental air pollution through the combustion of lead-containing gasolines. People who live in the areas with heavy traffic usually have the higher blood lead levels. This study was to investigate the lead level between the maternal blood and their infants cord blood. Immediatly after Placental delivary, the sampls of cord blood and maternal venous blood were obtained randomly from 14 infants whose mothers had spent their entire pregnancy in Seoul. Lead concentration was determined by the dithizone method. The results obtained were summarized as follows: 1. Hemoglobin, Hct and RBC were significantly higher in cord blood than in the maternal blood, by 36%, 54.9%, 36.9% respectively. 2. MCV in cord blood was higher than that in maternal blood by 13.8%. But MCH and MCHC were lower than those in maternal blood, by 9.7%, 3.3% respectively. The differences were statistically significant. 3. Lead concentration of cord blood $(23.93\;{\mu}g%)$ was higher than that in maternal blood $(21.93\;{\mu}%)$ by 9.1%.