• Korean Journal of Remote Sensing
• /
• v.17 no.4
• /
• pp.285-295
• /
• 2001

We developed a CASE-II water model that will enable the simulation of remote sensing reflectance($R_{rs}$) at the coastal waters for the retrieval of suspended sediments (SS) concentrations from satellite imagery. The model has six components which are: water, chlorophyll, dissolved organic matter (DOM), non-chlorophyllous particles (NC), heterotrophic microorganisms and an unknown component, possibly represented by bubbles or other particulates unrelated to the five first components. We measured $R_{rs}$, concentration of SS and chlorophyll, and absorption of DOM during our field campaigns in Korea. In addition, we generated $R_{rs}$ from different concentrations of SS and chlorophyll, and various absorptions of DOM by random number functions to create a large database to test the model. We assimilated both the computer generated parameters as well as the in-situ measurements in order to reconstruct the reflectance spectra. We validated the model by comparing model-reconstructed spectra with observed spectra. The estimated $R_{rs}$ spectra were used to (1) evaluate the performance of four wavelengths and wavelengths ratios for accurate retrieval of SS. 2) identify the optimum band for SS retrieval, and 3) assess the influence of the SS on the chlorophyll algorithm. The results indicate that single bands at longer wavelengths in visible better results than commonly used channel ratios. The wavelength of 625nm is suggested as a new and optimal wavelength for SS retrieval. Because this wavelength is not available from SeaWiFS, 555nm is offered as an alternative. The presence of SS in coastal areas can lead to overestimation chlorophyll concentrations greater than 20-500%.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.95-100
• /
• 2014

In hypersonic aircraft, increase of aerodynamic heat and engine heat leads heat loads in airframe. It could lead structural change of aircraft's component and malfunctioning. Endothermic fuels are liquid hydrocarbon fuels which are able to absorb the heat load by undergoing endothermic reactions. In this study, exo-tetrahydrodicyclopentadiene was selected as a model endothermic fuel and experiments on endothermic properties were investigated with pore structure controlled zeolite catalyst using metal deposition. We secured the catalyst that had better endothermic performance than commercial catalyst. The object of this study is inspect catalyst properties which have effect on heat absorption improvement. Synthetic catalyst could be applied to system that use exo-THDCP as endothermic fuel instead of other commercial catalyst.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.1
• /
• pp.86-92
• /
• 2019

Although perylene bisimide derivatives have advantages such as excellent thermal stability and high luminance efficiency, they have poor solubility characteristics in organic solvents. In this research, in order to improve the solubility characteristics, we prepared perylene bisimide derivatives (1C) and (2C) with swallow-tail substituted imide, which is known to lead to excellent solubility. The structures and properties of swallow-tail perylene bisimide (1C) and (2C) were analyzed by $^1H-NMR$, FT-IR, UV/Vis spectroscopy, and thermogravimetric analysis (TGA). The maximum absorption wavelengths of (1C) and (2C) in the UV/Vis spectrum were 558 nm and 556 nm, respectively, and the maximum emission wavelengths were 602 nm and 600 nm, respectively. In the TGA, (1C) demonstrated good thermal stability with less than 5 wt% weight loss up to $242^{\circ}C$. In the solubility test, (1C) and (2C) exhibited solubilities of more than 5 wt% in chloroform, ethyl acetate, and dimethylformamide, but not in methanol. When the compounds (1C) and (2C) were mixed with PMMA (polymethyl methacrylate), thin films showed peaks at 679 nm and 677 nm, respectively, in the photoluminescence spectra. (1C) was found to be a possible candidate as red organic phosphor for hybrid LEDs.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.5
• /
• pp.449-456
• /
• 2019

Recent developments in architectural technologies and programs have enabled architects to think creatively and design free-form architecture. however, there are many problems in the production technology of FCP(Free-Form Concrete Panel). In particular, reduced accuracy due to lack of free-form panel production technology can lead to redesign of buildings as a result, problems such as an increase in construction cost and period. Therefore, this experiment aimed to compensate the decrease of the accuracy according to the displacement difference and to derive the proper mixing ratio for maintaining the shape during the free-form panel curing. In this study, molds were made using paraffin that is a recyclable phase change material. Concrete Panel is usually produced from Portland cement, dead burn magnesia, phosphate, borax and fine aggregate. In this study, four mixing ratios of FCP were selected after each material was blended to determine the proper blending ratio of the fluidity phase, the water absorption rate and the water content of the test piece. FCP was fabricated on the basis of the selected four compounding ratios and thickness and error rate were measured. Based on the error rate of the measured FCP, the quality standard was satisfied among the four compounding ratios.

• Korean Journal of Poultry Science
• /
• v.47 no.4
• /
• pp.255-265
• /
• 2020

This study was performed to evaluate the effects of available phosphorus (AP) levels with or without supplemental phytase on the performance, egg quality, and serum biochemical parameters of laying hens. A total of 540 laying hens (40-week-old) were housed in cages and assigned to 6 dietary treatments with 5 replicates each, for 20 weeks. The treatments consisted of 0.20%, 0.25%, and 0.30% AP diets with or without phytase supplementation. During the 20-week period, egg production was lowest in hens fed the 0.20% AP diet; however, phytase supplementation in the diet completely corrected the adverse effect (P<0.05). No consistent difference was observed in egg production between hens fed the 0.25% and 0.30% AP diets and those fed the 0.20% and 0.30% AP diets with phytase supplementation. Similarly, egg mass was lowest in the 0.20% AP diet-fed group, and no difference in egg mass was observed in the 0.25% and 0.30% AP diet as well as the phytase-supplemented diet groups; however, egg mass was improved in the phytase-supplemented diet groups(P<0.05). Egg quality traits did not differ with dietary treatments. Serum alkaline phosphatase level showed a linear decrease (P<0.05) in the phytase-treated groups with increasing AP levels; moreover, a numerically linear increase (P<0.05) in serum Ca and P levels was observed in the phytase-treated groups. The results of this study indicate that phytase supplementation in the diet of laying hens could increase egg production and may lead to greater mineral absorption.

• Journal of agricultural medicine and community health
• /
• v.21 no.1
• /
• pp.85-95
• /
• 1996

To examine the contamination in Ulsan coastal area, some heavy metal concentrations in sea water and Mytilus coruscus have been measured. Sea water samples were collected on April 6 in 1995 and Mytilus coruscus samples were collected on April 2 in 1995. Total number of sea water samples was 26 and that of Mytilus coruscus was 54. The sites where the samples collected were same in sea water and Mytilus coruscus. The method of analysis was atomic absorption spectrophotometer. The results indicated that the heavy metal concentrations of sea water were varied according to the sampling stations. The concentrations of cadmium, manganese, zinc in sea water collected in the coastal area near Mipo complex were higher than those of other coastal areas, and the concentrations of lead in sea water collected in the coastal area near petrochemical complex were higher than those of others. In general the concentrations of lead, zinc, copper in sea water were proportionate to those in Mytilus coruscus. The mean concentration rates of lead, cadmium, manganese in Mytilus coruscus inhabiting in Ulsan coastal area were similar, 1070, 1370 and 1300, respectively. The concentration rate of mercury was 80, the lowest value of other heavy metals, and that of copper was 6940, the highest value. Consequently it seems to be more desirable to use Mytilus coruscus as a sample to examine the contamination of coastal area than sea water.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.3
• /
• pp.185-193
• /
• 1992

To investigate differences in lead content in soils and paddy rices, affected by air pollutants from the Janghang Smelter, soil samples at the different directions, distances, and depths, surface(0-15cm depth) and subsurface(15-30cm depth) in 1982 and 1990, and rice plants at soil sampling sites in 1990 were separately collected at the Janghang Smelter area affected by combustible waste gas from the smelter chimney. Soil samples were extracted with $4M-HNO_3$ and plant samples were digested with mixture of $HNO_3$ and $HCIO_4$ for analyzing by atomic absorption spectrophotometry. The Pb contents in soils ranged from 10.3 to 644.8mg $kg^{-1}$. The average content in 1990 was higher than that in 1982. The Pb content in soils at sites nearer the center of the smelter was higher than that at sites farther from the center. The highest lead content was found at the east direction, and was low in order of east>north-north east>north east > north. The variation of Pb level in soils at east sites was more considerable than other directions. The Pb level in surface soils was higher than that in subsurface soils. The contaminated radius of Pb was until 3km all at east, north-north east and north east. A significant correlation was found between Pb content in surface soils of 1982 and that in surface soils of 1990, between Pb content in soils and contents of Cd and Zn in soils, and between Pb content in soils and soil properties as organic matter, available silicate, cation exchange capacity, exchangeable $Ca^{++}$, $Mg^{++}$ and $Na^+$. Pb content in brown rice was low in the panicle axis, and brown rice, and Pb content in stem was 3.26 times of that in brown rice. Pb content in brown rice ranged from 2.2 to 9.0 mg $kg^{-1}$.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.1 s.45
• /
• pp.25-43
• /
• 1994

To estimate the factors to the inclination of the criminal violence, the content of trace minerals and toxic metals in the scalp hair were measured during the period from May 1992 to October 1992. One hundred eleven violent and 89 nonviolent criminal inmates of Taegu Correctional Institute were selected. The inmates of violent criminals were imprisoned by murder, robber, rape, injury and violent acts. Those of nonviolent criminals were swindle, larceny, and adultery and had no history of institutional violence. The contents of two toxic metals (cadmium, lead) and five trace minerals (Cu, Fe, Zn, Mg, Na) were determined by an atomic absorption spectrophotometer (IL. 551). The contents of cadmium and lead in hair of violent criminals were significantly higher as $0.56{\pm}0.14ppm,\;11.53{\pm}3.32ppm$, respectively, than $0.42{\pm}0.20ppm,\;9.63{\pm}4.31ppm$ of nonviolent group (p<0.01). But the level of copper was significantly lower than nonviolent group (p<0.05). The factors that had a significant correlation with the inclination of violence in multiple logistic regression analysis were cadmium (odds ratio=98.09), unmarried (odds ratio=0.39), many times of criminal history(odds ratio=1.57) and residence of rural area (odds ratio=0.44). The results suggest that the sub-toxic contents of cadmium and lead in the hair may be of potential effect on behavior, and the mineral analysis may be an important adjunctive diagnostic procedure. Further studies into this problem are necessary.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.3 s.39
• /
• pp.287-302
• /
• 1992

Hemoglobin (Hb), zinc protoporphyrin(ZPP) and blood lead (PbB) levels were determined for 1,851 blood samples collected from healthy urban population to establish reliable baselines for Hb, ZPP and PbB levels by age and sex. ZPP values were analyzed with a hematofluorometer and PbB determinations were concurrently carried out using flameless atomic absorption spectrophotometry. The blood sampling period was about 6 months from May, 1991 and the summarized results were as follows ; 1. The mean value of Hb in male and female were $14.55{\pm}1.81g/dl$ and $12.61{\pm}1.18g/dl$ respectively and there was statistically significant difference(p<0.05). 2. The mean value of ZPP in pre-schoolchildren was $37.49{\pm}13.31{\mu}g/dl$ for male, $35.77{\pm}11.85{\mu}g/dl$ for female and that of ZPP in after 7 years groups was $31.91{\pm}8.23{\mu}g/dl$ for male, $30.11{\pm}9.11{\mu}g/dl$ for female and there was statistically significant difference(p<0.05). 3. The mean value of PbB in pre-schoolchildren was $25.10{\pm}5.21{\mu}g/dl$ for male, $24.45{\pm}4.18{\mu}g/dl$ for female and that of PbB in after 7 years groups was $24.28{\pm}3.00{\mu}g/dl$ for male, $21.99{\pm}5.05{\mu}g/dl$ for female and there was statistically significant difference(p<0.05).

• Journal of the Korean Chemical Society
• /
• v.12 no.2
• /
• pp.65-80
• /
• 1968

The physico-chemical properties of nine selected thallium borosilicate glasses and other 21 supplementary compositions were investigated. Their composition-property curves are found to be in many respects analogous to those of other borosilicate glasses containing lithia, soda, and lead oxide. It is indicated that certain minima found in the composition-property curves of thallium borosilicate glasses might be caused by a change in boron coordination as has been observed to occur in the $Na_2O-B_2O_3-SiO_2$ glasses. Typical effects of thallium ions on the borosilicate glass are summarized as follows: 1) Addition of thallium ions increased density, refractive index, water solubility, linear coefficient of thermal expansion, and dielectric constant. 2) Increased concentration of thallium decreased the softening point of the glasses, caused fluorescence under ultraviolet radiation and smeared out the absorption edges up to $15{\mu}$ in the infrared region. An extensive liquid immiscibility was found by replication electron microscope technique in the $Tl_2O-B_2O_3-SiO_2$ system. The immiscibility covers a composition range roughly from 55 wt. % Tl2O to the binary system $B_2O_3-SiO_2.$ By acid treatment, it was found that the immiscible glass consists of separate silica-rich and boron-rich phases.