• 제목/요약/키워드: lead & tin

검색결과 152건 처리시간 0.03초

순간접전기전력법에 의한 용융 Cd중의 Zn과 Cu, Ag, In, Bi, Pb 및 Sn와의 상위작용 파라미터 (Thermodynamic interaction parameter between Zn and Cu, Ag, In, Bi, Pb, Sn in Dilute cadmium alloy by Touch Instant electro-motive force method)

  • 김대룡;윤겸하
    • 한국표면공학회지
    • /
    • 제15권4호
    • /
    • pp.192-207
    • /
    • 1982
  • A study has been made of the interaction parameters of Zn other elements in dilute solutesd solution of molten cadmium alloys over the temperature range of 450 to 570$^{\circ}C$. The experi-mental measurementss were made in a touch instant cell using a fusedd Licl-KCl electrolyte. The activity of zinc in binary and ternary solutions sexhibiteds a strong positive deviation from Raoult's law. The addition of silver, indium or lead increased the activity of zinc whereas addition of copper, bismuth or tin decreased the zinc activity slightly. The results for all the metallic solutions showed a linear dependence of reciprocal of ab-solute temperature over the experimental range. The interaction parameters obtained are as follows.

  • PDF

Electrocatalytic Reduction of Carbon Dioxide on Sn-Pb Alloy Electrodes

  • Choi, Song Yi;Jeong, Soon Kwan;Park, Ki Tae
    • 한국기후변화학회지
    • /
    • 제7권3호
    • /
    • pp.231-236
    • /
    • 2016
  • Electrocatalytic reduction can produce useful chemicals and fuels such as carbon monoxide, methane, formate, aldehydes, and alcohols using carbon dioxide, the green house gas, as a reactant through the supply of electrical energy. In this study, tin-lead (Sn-Pb) alloy electrodes are fabricated by electrodeposition on a carbon paper with different alloy composition and used as cathode for electrocatalytic reduction of carbon dioxide into formate in an aqueous system. The prepared electrodes are measured by Faradaic efficiency and partial current density for formate production. Electrocatalytic reduction experiments are carried out at -1.8 V (vs. Ag/AgCl) using H-type cell under ambient temperature and pressure and the gas and liquid products are analyzed by gas chromatograph and liquid chromatograph, respectively. As results, the Sn-Pb electrodes show higher Faradaic efficiency and partial current density than the single metal electrode. The Sn-Pb alloy electrode which have Sn:Pb molar ratio=2:1, shows the highest Faradaic efficiency of 88.7%.

초음파-광음향 융합 영상을 위한 투명 초음파 변환기 (Optically transparent ultrasound transducers for combined ultrasound and photoacoustic imaging: A review)

  • 박성훈;장진호
    • 한국음향학회지
    • /
    • 제42권5호
    • /
    • pp.441-451
    • /
    • 2023
  • 초음파 변환기는 광음향 및 초음파 영상 조합과 영상 평가에 있어 필수 구성 요소이다. 그러나 기존의 초음파 변환기는 불투명하여 광음향 영상을 획득하기 위해서는 광이 초음파 변환기를 우회 해야한다. 동축 정렬이 없다면 광 도달 영역이 제한되고 이를 해결하기 위해 복잡한 구성으로 시스템의 부피가 커지는 문제가 있다. 이러한 문제점을 극복하기 위해 광학적으로 투명한 초음파 변환기를 개발하기 위해 다양한 접근 방법이 연구되었다. 기존의 불투명한 초음파 변환기와 다르게 광학적으로 투명한 초음파 변환기는 특정 압전소자와 용도에 맞는 다양한 제작 방법이 존재한다. 본 연구에서 압전소자 기반의 투명 초음파 변환기에 사용되는 재료로 Lithium Niobate(LNO), Lead Magnesium Niobate-Lead Titanate(PMN-PT), Polyvinylidene Difluoride(PVDF)를 사용한 결과를 비교하였다. LNO는 투명 초음파 변환기에서 많이 사용되는 압전소자이고, PMN-PT는 LNO보다 높은 송수신율로 최근 활발히 연구되고 있다. 기존 투명 변환기는 광음향 해상도보다 초음파 해상도가 낮지만, 최근 PVDF를 사용하여 높은 초음파 해상도의 투명 집속초음파 변환기를 제작하고 있다. 이러한 투명 초음파 변환기 제작 결과에 대한 비교 분석을 수행하였다.

Sn-Bi도금 $Sn-3.5\%Ag$ 솔더를 이용한 Capacitor의 저온 솔더링 (Lower Temperature Soldering of Capacitor Using Sn-Bi Coated $Sn-3.5\%Ag$ Solder)

  • 김미진;조선연;김숙환;정재필
    • Journal of Welding and Joining
    • /
    • 제23권3호
    • /
    • pp.61-67
    • /
    • 2005
  • Since lead (Pb)-free solders for electronics have higher melting points than that of eutectic Sn-Pb solder, they need higher soldering temperatures. In order to decrease the soldering temperature we tried to coat Sn-Bi layer on $Sn-3.5\%Ag$ solder by electroplating, which applies the mechanism of transient liquid phase bonding to soldering. During heating Bi will diffuse into the $Sn-3.5\%Ag$ solder and this results in decreasing soldering temperature. As bonding samples, the 1608 capacitor electroplated with Sn, and PCB, its surface was finished with electroless-plated Ni/Au, were selected. The $Sn-95.7\%Bi$ coated Sn-3.5Ag was supplied as a solder between the capacitor and PCB land. The samples were reflowed at $220^{\circ}C$, which was lower than that of normal reflow temperature, $240\~250^{\circ}C$, for the Pb-free. As experimental result, the joint of $Sn-95.7\%Bi$ coated Sn-3.5Ag showed high shear strength. In the as-reflowed state, the shear strength of the coated solder showed 58.8N, whereas those of commercial ones were 37.2N (Sn-37Pb), 31.4N (Sn-3Ag-0.5Cu), and 40.2N (Sn-8Zn-3Bi). After thermal shock of 1000 cycles between $-40^{\circ}C$ and $+125^{\circ}C$, shear strength of the coated solder showed 56.8N, whereas the previous commercial solders were in the range of 32.3N and 45.1N. As the microstructures, in the solder $Ag_3Sn$ intermetallic compound (IMC), and along the bonded interface $Ni_3Sn_4$ IMC were observed.

능산리절터 제3건물지 출토 청동덩어리에 대한 금속학적 분석 (The metallurgical Analysis of a Bronze-Lumps from the Third Building Site at Neungsan-ri Temple Site)

  • 노태천
    • 보존과학회지
    • /
    • 제10권1호
    • /
    • pp.31-37
    • /
    • 2001
  • 부여 능산리절터 제3건물지(공방)의 북측 공방터에서 수습된 청동덩어리 시료 4개에 대한 금속학적 조사를 실시하였다. 시료 단면의 미세조직은 SEM을 이용하여 관찰하였고, 시료의 정성 및 정량분석은 EDS를 이용하였다. 분석 결과는 다음과 같다. 절터 제3건 물지 내의 북측공방터에서 수습된 청동덩어리 시료 1과 시료 2는 동제련 과정에서 형성된 동피(matte)를 제련하여 만든 조동(粗銅)로 추정되고, 시료 3은 구리 제련 과정에서 만든 정동(精銅)에 주석만을 첨가하여 합금했을 가능성이 있는 Cu-Sn계 청동덩어리이고, 시료 4는 정동에 주석과 납을 함께 첨가하여 합금했을 가능성이 있는 Cu-Sn-Pb계의 청동덩어리였다. 이 제3건물지(공방)에서는 동광석을 제련하여 동피를 만들거나, 외부에서 반입된 동피를 녹여 조동을 만들고, 이것들을 다시 정련하여 정동을 만든 다음에, 주석과 납을 첨가시켜 조성이 다른 여러 가지 청동제품을 만든 것으로 추정된다.

  • PDF

분자배열된 4,4',4''-tris(N-(1-naphthyl)-N-phenylamino)-triphenylamine 박막 제조와 전기적 특성 (Formation and Current-voltage Characteristics of Molecularly-ordered 4,4',4''-tris(N-(1-naphthyl)-N-phenylamino)-triphenylamine film)

  • 강도순;최영선
    • 공업화학
    • /
    • 제18권5호
    • /
    • pp.506-510
    • /
    • 2007
  • 전기적 특성을 가지는 4,4',4''-tris(N-(1-naphthyl)-N-phenylamino)-triphenylamine (1-TNATA)가 유기발광소자(OLED)에서 전극으로 사용되는 ITO (Indium Tin Oxide)와 홀 수송층(Hole Transport Layer, HTL) 사이에 박막으로 진공증착되었다. 분자배열이 잘 되어진 1-TNATA의 경우 ITO와 홀 수송층 사이의 계면에서 생기는 전하주입장벽을 줄임으로 소자의 안정성과 효율을 높여준다. 본 연구에서의 라만 스펙트라(Raman spectra) 분석 결과, 증착된 1-TNATA 박막의 열처리와 증착하는 동안 전자기장 처리에 의해서 박막이 집적되고 분자배열이 이루어짐을 확인하였다. 열처리를 한 경우 1-TNATA 박막으로의 전류 흐름이 25% 증가하였다. 또한, $110^{\circ}C$에서 열처리한 1-TNATA 박막으로 제조된 다층유기발광소자의 전원 효율과 발광효율이 향상되었다. 열처리한 박막이 전자기장으로 처리한 박막에 비해 높은 효율을 나타내었다.

고효율 방사선 검출 센서를 위한 PbO 박막의 소결효과에 대한 연구 (The study of PbO's sintering effect for high efficiency x-ray detection sensor)

  • 정숙희;김윤석;김영빈;김민우;오경민;윤민석;남상희;박지군
    • 한국방사선학회논문지
    • /
    • 제3권3호
    • /
    • pp.37-40
    • /
    • 2009
  • 본 연구에서는 디지털 엑스레이 검출기의 직접 방식 다결정 lead oxide(PbO)를 이용하여 고효율 방사선 검출 센서를 제작하였다. 나노 크기의 PbO 입자들은 높은 효율을 가지기 위하여 액상법에 의한 합성법을 통하여 제작되었다. 제작된 나노 크기의 PbO 입자를 이용하여 실온에서 $200{\mu}m$ 두께의 후막을 PIB(particle-in-binder) 방법으로 다양한 온도에서 ITO(Induim Tin Oxide) 유리 위에 도포되었다. 제작된 PbO 후막은 누설전류, 엑스레이 감도, 신호 대 노이즈 비(SNR)을 통해 전기학적 특성이 분석되었다. 이로서 후막의 전기적 특성이 열처리 온도에 따라 많은 영향을 미치는 것을 발견하였고 산소 분위기에서 $500^{\circ}C$의 온도로 열처리과정을 거친 후막이 엑스레이 검출 센서로서의 효율이 가장 높다는 결론을 도출할 수 있었다.

  • PDF

위생캔으로 제조한 감주 음료의 품질 평가와 금속물질 함량에 관한 연구 (Studies on the Quality Evaluation and Metal Content of Sanitary Canned Kamju Beverage)

  • 허윤행
    • 환경위생공학
    • /
    • 제15권2호
    • /
    • pp.18-26
    • /
    • 2000
  • In order to improve the quality of Kamju(sikhae), Korean traditional sweat fermentated rice drink, Kamju made with laboratory fermenting from both covered barley malt and that added to commercial $\alpha-amylase$ and commercial sikhae can were investigated and analyzed ad follows 1. The amylase activities in L-malt(laboraory made malt), C-malt(commercial malt) were 25,065 units, 20,498 units at $60^{\circ}C$ and when heating at $60^{\circ}C$ for one hour their heat stability was getting lower and while at $70^{\circ}C$ after 2 hours both their heat stability was under 21%. 2. The external appearance, of all samples, in beating test, flipper, springer and leaker test were excellent and good valued. On the open test of sample can, head space was 7.9~9.0mm, net weight 247~250g, 432~435g, pH 4.96-5.76, Brix 13.2~14.0 and vacuum degree was 29~35cmHg. 3. The sucrose content of sample 1~5 was 8,57~10.01% highest ammount than sample 6(0.91%) 7(0.43%) and maltose content of sample 1~5 was 0.65~1.41% lower than 6 was 7.91% and 7 was 8,36%. The good traditional flavor texture and saccharides components content of glucose of sample 1~5 was 1.09~1.51, 6(3.86%), 7(3.97%), fructose content of sample 1~5 was 0.45~0.95%, 6(2.76%), 7(2.81%), maltotriose and raffinose of sample 1~5 were 0.04~0.291, 6(0.61%), 7(2.81%), and solid content of sample 1~5(3.1~3.8) was lower than 6(10.25%), 7(10.09%). 4. The result of sensory test as measured as lemone yellow of sample 6 and milky of sample 7, and weetness, flavor, color, traditional texture and sensory value for sample 1~5(3.1~3.8) was lower degree than that for 6(4.5), 7(4.0). 5. Among the heavy metals analyzed from sample cans, tin, iron and lead content for sample 1~5 were 31.95~36.71ppm, 5.84~6.39ppm and 0.075~0.09ppm while their content of sample 6.7, tin, 32.91ppm, 32.87ppm, iron 5.51ppm, 5.41ppm and lead, 0.074ppm, 0.079ppm.

  • PDF

The Effect of Barrel Vibration Intensity to the Plating Thickness Distribution

  • Lee, Jun-Ho;Roselle D. Llido
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 1999년도 추계학술발표회 초록집
    • /
    • pp.15-15
    • /
    • 1999
  • In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

  • PDF

고에너지 광자선치료에서 고정판 흡수물질을 이용한 피부보호효과의 향상 (The Enhancement of Skin Sparing by Tray Materials for High Energy Photon Beam)

  • 추성실;이창걸;김귀언
    • Radiation Oncology Journal
    • /
    • 제11권2호
    • /
    • pp.449-454
    • /
    • 1993
  • 종양치료를 위하여 고에너지 X-선 또는 감마선을 인체에 조사할 경우 피부 표면 선량이 최대지점 선량의 $30~60\%$에 불과 함으로 피부보호 효과(Skin sparing effect)를 얻을 수 있는 장점을 갖고있다. 그러나 종양특성과 발병위치에 따라 조사면을 크게 하거나 선속내에 차폐물질 또는 보상여과판을 설치하여 치료할 경우 피부보호 효과가 감소되거나 없어지는 경우가 있고 이것은 종양치료에 중요한 요인이 되고 있다. 연세 암전문병원에 설치된 코발트 60원격치료기와 선형가속기에서 발생되는 4 MV및 10 MV x-선에 대한 피부선량을 측정하였으며 차폐물고정판(Tray) 구성 물질의 종류와 조사면의 크기 및 피부와 고정판간의 거 리에 따른 피부선량의 변화를 평가하였다. 방사선 조사면이 $15{\times}15\;cm^2$ 이상 넓고 피부와 collimator 간의 거리가 30 cm 이상일 때 피부 표면선량은 코발트 -60, 4, 10 MV에서 각각최대선량의 40, 30, $20\%$로 감소하였으며 조사면의 크기와 차폐 고정판의 물질에 따라 증감하였다. 차폐물을 고정시키는 고정판을 Lucite로 제작하고 고정판과 피부간의 거리를 약 15 cm 이상 간격을 주면 표면선량을 $50\%$로 줄일 수 있었고 주석, 구리, 납등을 부착시키면 전방산란 선량비율이 감소되어 피부선량은 $35\%$로 피부보호 효과를 얻을 수 있었다. 방사선의 전방산란비율은 에너지와 흡수물질의 원자번호에 관계되며 납과 주석 이 각각 코발트-60 감마선과 4~10 MV x-선의 전방산란비를 가장 크게 감소시켰다.

  • PDF