• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.297-311
• /
• 1998

Landscaping on artificial ground is currently served as a means to imposing a greenery benefit on high-density and high-rise apartment sites. It functions as a sub-hierarchy in apartment planning such as ornamental element from the past. Major parking space tends to be allocated on the basement area in response to the required parking regulation. Therefore, competitive relatioinship between the parking and greenery space I limited outdoor of apartments leads to the development planning strategy and technology of artificial ground. This study aims at evaluating landscape planning on artificial ground of apartment complex through several approaches such as site survey, plan drawing analysis, and interview with related field experts. 15 survey apartment sites including Bundang Model, Shindaebang-dong, Pyoungchon Hyundai Apartments have been selected for conducting the research. Main results of this study are summarized below : First, scattering allocation of artificial ground between apartment building units is a dominant plan layout type among the survey sites. Even though unifying allocation type has an advantage to maximize underground parking space, it has a difficulty in maintaining proper soil ground base for nurturing plants. Therefore, underground parking space should be planned by unifying allocation type placed separately from apartment units. This plan type can provide a balanced planting between soil and artificial ground on surface level. Second, It is strongly recommended to integrate the whole planting base which involves architectural structure, drainage, and water proofing above the planting design. When considering that process as a professional subject dealing with natural material such as trees and shrubs, those tasks should be directed by landscape architectural divison and landscape architect. And planting area for artificial ground has to be specified in initial phase of architectural design. This step provides an opportunity to make a proper decision on structural load, drainage, and water proof design as an integrated part of the management.

• Journal of Navigation and Port Research
• /
• v.35 no.6
• /
• pp.469-475
• /
• 2011

Ulsan pilotage is one of the most busy pilots boarding among the korean pilotages. The route layout of ulsan port is simple but the complex degree of marine traffic flow is high because there are many navigating ships from/to piers and anchorages nearby route. So, this paper is surveyed and analysised the navigating dangerous factors as to navigation danger elements in/near the route, the proper distance between piers at the ulsan waterways. And this research assures the same place where shiphandling bunder is occurred to compare the danger sense of pilot with environment stress to represented the mariner's shiphandling stress quantitatively at the ulsan route.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.219-226
• /
• 2020

The container terminal operators established a re-marshalling plan to reduce the loading operation time and the release operation time. Re-marshalling is to rearrange the containers in the container yard to the advantageous position to shorten the working time using the spare time of the automated yard crane. This study assumed the automated container terminal with a perpendicular layout and deals with the inter-bay re-marshalling planning problem in a yard block. The inter-bay re-marshalling plan determines the container to be moved, the location to be relocated, and the sequence of relocation operations. This study presents a mixed integer programming model that simultaneously determines the storage location and the operation sequence while satisfying the spatial availability during the re-marshalling. Numerical experiments are conducted to understand re-marshalling operation using a beam search method.

• Journal of Korea Water Resources Association
• /
• v.39 no.1 s.162
• /
• pp.35-46
• /
• 2006

In this study, we proposed a layout of the integrated decision support system in order to prevent the contamination and to manage risk in water supply networks for safe and smooth water supply. We evaluated the priority of risk factors to detect anomaly in water supply networks using PROMETHEE and ANP techniques, which are applied to various Multi-Criteria Decision Making area in Europe and America. To develop the model, we selected pH, residual chlorine concentration, discharge, hydraulic pressure, electrical conductivity, turbidity, block leakage and water temperature as the key data item. We also chose pipe corrosion, pipe burst and water pollution in pipe as the criteria and then we present the results of PROMETHEE and ANP analysis. The evaluation results of the priority of risk factors in water supply networks will provide basic data to establish a contingency plan for accidents so that we can establish the specific emergency response procedures.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.1
• /
• pp.85-94
• /
• 2002

EMRCA(Explicit Max_min Rate Control Algorithm) switch, which has been proposed in the ATM(Asychronous Transfer Mode) standard, controls the ABR(Available Bit Rate) service traffic in the ATM networks. The ABR service class of ATM networks uses a feedback control mechanism to adapt to varying link capacities. The VS/VD(Virtual Source/Virtual Destination) technique offers the possibility to segment the otherwise end-to-end ABR control loop into separate loops. The improved feedback delay and the control of ABR traffic inside closed segments provide a better performance and QoS(Quality of Service) for ABR connections with respect to throughput, delay, and jitter. This paper is study of an ABR VS/VD flow control method. Linear control theory offers the means to derive correct choices of parameters and to assess performance issues, like stability of the system, during the design phase. The performance goals are a high link utilization, fair bandwidth distribution and robust operation in various environments, which are verified by discrete event simulations. The major contribution of this work is the use of linear control theory to model and design an ABR flow control method tailored for the special layout of a VS/VD switch, the simulation shows that this techniques better than conventional method.

• Advances in concrete construction
• /
• v.8 no.3
• /
• pp.173-185
• /
• 2019

This article presents a comparative study of the effect of steel layouts on the seismic behavior of transition steel-concrete composite connections, both experimental and analytical investigations of concrete filled steel tube-reinforced concrete (CFST-RC) and steel reinforecd concrete-reinforced concrete (SRC-RC) structures were conducted. The steel-concrete composite connections were subjected to combined constant axial load and lateral cyclic displacements. Tests were carried out on four full-scale connections extracted from a real project engineering with different levels of axial force. The effect of steel layouts on the mechanical behavior of the transition connections was evaluated by failure modes, hysteretic behavior, backbone curves, displacement ductility, energy dissipation capacity and stiffness degradation. Test results showed that different steel layouts led to significantly different failure modes. For CFST-RC transition specimens, the circular cracks of the concrete at the RC column base was followed by steel yielding at the bottom of the CFST column. While uncoordinated deformation could be observed between SRC and RC columns in SRC-RC transition specimens, the crushing and peeling damage of unconfined concrete at the SRC column base was more serious. The existences of I-shape steel and steel tube avoided the pinching phenomenon on the hysteresis curve, which was different from the hysteresis curve of the general reinforced concrete column. The hysteresis loops were spindle-shaped, indicating excellent seismic performance for these transition composite connections. The average values of equivalent viscous damping coefficients of the four specimens are 0.123, 0.186 and 0.304 corresponding to the yielding point, peak point and ultimate point, respectively. Those values demonstrate that the transition steel-concrete composite connections have great energy dissipating capacity. Based on the experimental research, a high-fidelity ABAQUS model was established to further study the influence of concrete strength, steel grade and longitudinal reinforcement ratio on the mechanical behavior of transition composite connections.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.1-12
• /
• 2019

The purpose of this study is to examine the fashion characteristics of fashion magazine cover by comparing and analyzing the formative characteristics of fashion, visual design characteristics and illustration vocabulary on the cover of 3 fashion magazines. The data analysis criteria consisted of the formative elements of fashion (fashion design element, fashion coordination element) and visual design element (color, illustration lexical layout, model photograph type). Data analysis methods were statistical analysis, stepwise lexical analysis, and content analysis. The results of the study are as follows. First, the formative characteristics of fashion on the cover of fashion magazines show that ELLE is a feminine and elegant characteristics, VOGUE is a modern, chic and mannish characteristics, and W is avant-garde and neutral characteristics. Second, visual design characteristics on the cover of fashion magazines, ELLE and VOGUE use modern and simple modern sensibility by using monotonous background color and background color number, and W showed original image characteristic by using various colors. Third, as a result of the illustration lexical analysis on the cover of fashion magazines, 4 core keywords of trend, star, event, and life appeared in 3 magazines in common. Elle differentiates by innovation, Vogue by discrimination, W by reconstruction.

• Explosives and Blasting
• /
• v.36 no.4
• /
• pp.26-34
• /
• 2018

Explosions of vapor cloud formed due to the leakage from installations with flammable fuels have often occurred in Korea and foreign countries. In this study, TNT equivalency method and Multi-Energy method for vapor cloud explosion blast modelling are described and demonstrated in a case study. As TNT equivalency method is simple and direct, it has been widely used for modelling a vapor cloud explosion blast. But TNT equivalency method found to be difficult to select a proper correlation between the amount of combustion energy produced from the vapor cloud explosion and the equivalent amount of TNT to model its blast effects. Multi-Energy method assumes that the strength of vapor cloud explosion blast depends on the layout of the space where the vapor cloud is spreading. Strictly speaking, the explosive potential of a vapor cloud is dependent upon the density of the obstructed regions. In this study, Flixborough accident are analyzed as a case study to assess the applicability of TNT equivalency method and Multi-Energy method. TNT equivalency method and Multi-Energy method found to be applicable if coefficient of TNT equivalency and coefficient of strength of explosion blast are selected properly.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.140-152
• /
• 2021

During the shift from gasoline vehicles to electric ones, auto parts manufacturing companies have realized the importance of improvement in the manufacturing process that does not require any layout changes nor extra investments, while maintaining their current production rate. Due to these reasons, for the auto part manufacturing company, I-company, this study has developed the simulation model of the PUSH system to conduct a process analysis in terms of production rate, WIP level, and logistics work's utilization rate. In addition, this study compares the PUSH system with other three manufacturing systems -KANBAN, DBR, and CONWIP- to compare the performance of these production systems, while satisfying the company's target production rate. With respect to lead-time, the simulation results show that the improvement of 77.90% for the KANBAN system, 40.39% for the CONWIP system, and 69.81% for the DBR system compared to the PUSH system. In addition, with respect to WIP level, the experimental results demonstrate that the improvement of 77.91% for the KANBAN system, 40.41% for the CONWIP system, and 69.82% for the DBR system compared to the PUSH system. Since the KANBAN system has the largest impacts on the reduction of the lead-time and WIP level compared to other production systems, this study recommends the KANBAN system as the proper manufacturing system of the target company. This study also shows that the proper size of moving units is four and the priority allocation of bottleneck process methods improves the target company's WIP and lead-time. Based on the results of this study, the adoption of the KANBAN system will significantly improve the production process of the target company in terms of lead-time and WIP level.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.520-527
• /
• 2021

In this study, we focused on the low practicality of traditional outdoor advertisements due to uniformity of materials, shapes, and designs, so in order to improve it, we will analyze impact on the practicality of outdoor advertisements depends on the attached type of advertising signboards. The research method is to set up a research model and hypotheses through a literature review and conduct a survey and then perform factor analysis and hierarchical regression analysis. Hypothesis1. The evaluation factors (readability, formability or symbolism) of outdoor advertising signboard in traditional markets will affect their practicality. Hypothesis 2. The type of attached advertising signboards (protruding type or wall-type) in traditional markets will control the impact of each evaluation factors' on practicality. In a result, readability and formability will affect practicality. To increase practicality, the size, color, font, layout and etc. of outdoor advertising signboards should be well recognized to get the better understanding. Also, practicality will be increased by the harmonization and the sense of balance.