• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.148-156
• /
• 2001

This paper proposed embedded application-specific microprocessor(YS-RDSP) whose structure has an additional DSP processor on chip. The YS-RDSP can execute maximum four instructions in parallel. To make program size shorter, 16-bit and 32-bit instruction lengths are supported in YS-RDSP. The YS-RDSP provides programmability. controllability, DSP processing ability, and includes eight-kilobyte on-chip ROM and eight-kilobyte RAM. System controller on the chip gives three power-down modes for low-power operation, and SLEEP instruction changes operation statue of CPU core and peripherals. YS-RDSP processor was implemented with Verilog HDL on top-down methodology, and it was improved and verified by cycle-based simulator written in C-language. The verified model was synthesized with 0.7um, 3.3V CMOS standard cell library, and the layout size was 10.7mm78.4mm which was implemented by using automatic P&R software.

• KIEAE Journal
• /
• v.14 no.3
• /
• pp.39-45
• /
• 2014

Energy poverty has been defined as low-income households who paid energy cost more than 10% of their ordinary income. Therefore, there are various subsidy programs focused on house remodeling for low-income households and one of them is the Home Energy Efficiency Assistance Program which have done by Korea Energy Foundation since 2007. The aim of the program is to improve the thermal performance of dilapidated dwellings and analyzed the detached house for the low-income households to develop the building typology. The database contained approximately 3,061 households which was obtained from the program in 2013 and the results of the study were like this; 1) For the shape of residential houses, the number of rectangular shaped building was higher than non-rectangular shaped ones. 2) For the orientation of buildings, the south layout of the detached housing was dominant to gain heating energy into buildings. 3) For the floor area, the average floor area was $44.2m^2$, although its size varied wide variations, which range from $6.3m^2$ to $107.1m^2$. 4) For the windows and doors, the south-facing window was larger than the other side. Finally it would be possible to determine the characteristics of residential houses for low-income families. A future study could establish typology of low-income housing that it would estimate the performance of each model building before and after the retrofit to improve the energy performance.

• Journal of Korea Water Resources Association
• /
• v.48 no.10
• /
• pp.845-855
• /
• 2015

Studies of optimizing pump operation in water distribution networks (WDN) are receiving spotlight in recent days. However, the water networks are quite complex including thousands of or even tens of thousands of nodes and pipes, thus simulation time is an issue. In some cases, implementing a computer model for pump operation decisions is restrictive due to intensive computation time. To that end, it is necessary to reduce the simulation time of water networks by simplifying the network layout. In this study, WDN skeletonization approaches were suggested and applied to a real water transmission network in South Korea. In skeletonizing the original network, it was constrained to match the water pressure and water age in the same junction locations to maintain the hydraulic and water quality characteristics in the skeletonized network. Using the skeletonization approaches suggested in this study, it is expected to reduce the simulation time of WDN and apply for developing a computer module of WDN real-time optimal operation.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.313-337
• /
• 2012

Recently, according to the being activated exhibition, it has been focused on the participants in order to enhance its interest and satisfaction. Consequently it is set up the model of research and the hypotheses based on the leading study of the physical environment of the exhibition and experience This study would like to analyze how the physical environments of the exhibition are effected on the factor of the experience and the participants' satisfaction. It also would like to check the factor of the experience to promote the participants' call and provide the useful information for the exhibitors to raise the participants' satisfaction. Being set the physical environment of the exhibition(layout accessibility, Facility aesthetics, facility cleanliness, convenience, comfort, human services) as a independent variable and fix the factor of experience (sense, feel, think, act and relate) as a parameter, the participants' satisfaction is identified. As a result of the research, the factor of experience is affected by the physical environment of the exhibition and the participants' satisfaction is affected by the factor of the experience. Therefore, the exhibitors have to consider the physical environments of the exhibition and the factor of experience for making the participants' satisfaction high when they hold the exhibitions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.120-128
• /
• 2018

OLED Display fabrication system is one of the most complicated discrete processing systems in the world. As the glass size grows from $550{\times}650mm$ to $1,500{\times}1,850mm$ in recent years, the efficiency of Automated Material Handling System (AMHS) has become very important and OLED glass manufacturers are trying to improve the overall efficiency of AMHS. Aiming to meet the demand for high efficiency of transportation, various kind of approaches have been applied for improving dispatching rules and facility layout, while simultaneously considering the system parameters such as glass cassettes due date, waiting time, and stocker buffer status. However, these works did not suggest the operational policy and conditions of distribution systems, especially for handling unnecessary material flows such as detour. Based on this motivation, in this paper, we proposed an efficient algorithm for improving detour transportation in OLED FAB. Specifically, we considered an OLED FAB simplifying OLED production environment in a Korean company, where four stockers are constructed for the delivery of Lot in a bay and linked to processing equipments. We developed a simulation model using Automod and performed a numerical experiment using real operational data to test the performance of three operation policies under considerations. We showed that a competitive policy for assigning alternative stocker in case of detour was superior to the current dedicated policy using a specified stocker and other considered policies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.83-94
• /
• 2017

There is a two lane ECTS(Electronic Toll Collection System) that users can pass with 80kph high speed in SeoBusan Tall Gate. This system to be combined two hi-pass lanes for removing meddle-island have been operated successfully. But, the appearance of two Lane ETCS makes toll gate more complicated, so it is very important how to arrange effectively various tolling lanes. This study was trying to evaluate lane configuration for minimizing speed and speed deviation among all kinds of lanes including two Lane ETCS in seoul toll gate. That is, we selected all scenarios to be happened actually, and evaluated them using micro traffic simulation model (VISSIM). The results of this study showed that each alternative had a very different speed and speed deviation by lane each other, so we will be able to achieve effective operation and configuration of lanes in toll gate using scenario methodology.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.376-378
• /
• 2011

Hamburg is going with the HafenCity Project to create new urban space for city's bustling central district. HafenCity will add an additional 155 hectares to Hamburg's central urban area, increasing its total area by some 40 percent. The new developments in HafenCity will be oriented towards the River Elbe and the great seaport. Its centre will have a close relation to water. They will be used for the construction of a fascinating mix of residential accommodation, offices, cultural and leisure amenities, retail facilities and restaurants set in a framework of an elaborate urban layout. This study is focusing on the purpose of the project goals, the task of the Hamburg authorities and GHS (Gesells chaft f$\ddot{u}$r Hafen und Standortentwicklung) and an urban planning ideas competition (draft masterplan). Regarding of the new trend of the reurbanisation in Europe, the aim of this study will be to find out, in which way Hafencity is trying to develope the new city district as a model for the European inner city of the 21st century.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.19-27
• /
• 2015

Objective: The aim of this study is to investigate how well eye movement times in visual target selection tasks by an eye input device follows the typical Fitts' Law and to compare vertical and horizontal eye movement times. Background: Typically manual pointing provides excellent fit to the Fitts' Law model. However, when an eye input device is used for the visual target selection tasks, there were some debates on whether the eye movement times in can be described by the Fitts' Law. More empirical studies should be added to resolve these debates. This study is an empirical study for resolving this debate. On the other hand, many researchers reported the direction of movement in typical manual pointing has some effects on the movement times. The other question in this study is whether the direction of eye movement also affects the eye movement times. Method: A cursor movement times in visual target selection tasks by both input devices were collected. The layout of visual targets was set up by two types. Cursor starting position for vertical movement times were in the top of the monitor and visual targets were located in the bottom, while cursor starting positions for horizontal movement times were in the right of the monitor and visual targets were located in the left. Results: Although eye movement time was described by the Fitts' Law, the error rate was high and correlation was relatively low ($R^2=0.80$ for horizontal movements and $R^2=0.66$ for vertical movements), compared to those of manual movement. According to the movement direction, manual movement times were not significantly different, but eye movement times were significantly different. Conclusion: Eye movement times in the selection of visual targets by an eye-gaze input device could be described and predicted by the Fitts' Law. Eye movement times were significantly different according to the direction of eye movement. Application: The results of this study might help to understand eye movement times in visual target selection tasks by the eye input devices.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.4
• /
• pp.292-301
• /
• 2001

IDDQ Testing is a very effective testing method to detect many kinds of physical defects occurred in CMOS VLSI circuits. In this paper, we consider the most commonly occurring bridging faults in current CMOS technologies and develop pattern generator for IDDQ testing using efficient IDDQ test algorithms. The complete set of bridging faults between every pair of all nodes(internal and external nodes) within circuit under test is assumed as target fault model. The merit of considering the complete bridging fault set is that layout information is not necessary. Implemented test pattern generator uses a new neighbor searching algorithm and fault collapsing schemes to achieve fast run time, high fault coverage, and compact test sets. Experimental results for ISCAS benchmark circuits demonstrate higher efficiency than those of previous methods.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.41-48
• /
• 2005

Before occupation of an apartment housing, the builders are required to inform the test result of IAQ to the public. However, there is no simplified method to predict IAQ before measurement of pollutant concentration. In this study, a simplified way of predicting IAQ based on the distribution of indoor pollutant concentration is proposed. 7 different cases of air change rate have been simulated through CFD analysis to get the distribution ratio of each pollutant material and then simplified functions were used with CRIAQ1 values derived from CFD simulation to evaluate by comparing the influence of each material in the indoor pollutant concentration. Again, a lot of efforts which can improve the indoor air quality have been performed. Materials used in indoor space are labeled with their pollutant emission level. Installation of ventilation system in residential buildings will be regulated by a building codes sooner or later. But it is important to understand the fact that layout of walls, location or size of openings will influence the indoor air flow and pollutant concentration. And location of emitting material influences to indoor air pollutants distribution. But until now there is few recognition and consideration of these factors. Therefore, in this paper the effects of these factors is proved and some kind of guideline is made for designers after a comparison of typical apartment floor plan and a new type plan with their average pollutant concentration and its distribution of each room. CFD(Computational Fluid Dynamics) program was used to show the indoor air flow and pollutant concentration distribution. For this purpose, a typical $100m^2$ apartment floor plan was chosen as a case study model and several alternatives were reviewed to improve the IAQ performance. The simulation took place in the condition of natural ventilation through windows.