• Proceedings of the ESK Conference
• /
• 1995.04a
• /
• pp.155-164
• /
• 1995

For efficient operation, vital hand controls must be easily controlled by the operator from his normal working position. The primary working area based on operator's working comfort was developed to serve as a design guideline tothe control panel layout. Ten male subjects participated in the experiment in which working comfort was measured for two controls of a lever type control and a knob type control with respect to the frontal and sagittal distances from the body center and the slope of a workplace. The response surface methodolgy using a central composite design was employed to develop a prediction model for perceived working comfort of each control. Both controls have a similar pattern of comfortable working area, but the lever type control has slightly broader working area. The concept of the proposed working area is a significant extension to the conventional working area such as Farley's or Squires' curves. It is shown that the distance toa control device and the slope have a quadratic effect to working comfort. It is noticeable that comfortable working area exists outside the conventional working area. The result of the response surface analysis also indicated that a little slope of about 15 .deg. for a control panel improves working comfort.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.190-198
• /
• 2011

The purpose of this research is to suggest the direction of the school planning for the future that could respond actively to fast-changing circumstances of the times. The specific purpose is as follows. First, this research creates the education spatial model for the future that could prepare the education for globalization, informationization, liberalization and suggests the direction of the school planning that would correspond to the revised curriculum in 2009. Based on the research findings, establish the fundamental architectural planning guidelines and provide a blueprint of the advanced school for the future. Second, this research suggests diverse layout method of the school building blocks for the future. Key factors, which are method of teaching, planning for eco-school, planning for ubiquitous computing environment, planning of mixed-use school facilities that would give direction of the school planning for the future are determined through theoretical consideration about the social structure, direction of education for the future and case study. Based on these keys factors, this research suggests directions of the school planning for the future.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.2
• /
• pp.9-18
• /
• 1997

Abstract This paper presents a heuristic method for optimal design of water distribution system with multiple sources and potential links. In multiple source pipe network, supply rate at each source node affects the total cost of the system because supply rates are not uniquely determined. The Linear Minimum Cost Flow (LMCF) model may be used to a large scale pipe network with multiple sources to determine supply rate at each source node. In this study the heuristic method based on the LMCF is suggested to determine supply rate at each source node and then to optimize the given layout. The heuristic method in turn perturbs links in the longest path of the network to obtain the supply rates which make the optimal design of the pipe network. Once the best tree network is obtained, the frequency count of reconnecting links by considering link failure is in turn applied to form loop to enhance the reliability of the best tree network. A sample pipe network is employed to test the proposed method. The results show that the proposed method can yield a lower cost design than the LMCF alone and that the proposed method can be efficiently used to design irrigation systems or rural water distribution systems.

• Journal of the Korean Society of Safety
• /
• v.27 no.4
• /
• pp.90-95
• /
• 2012

To prevent similar accidents with the basis of industrial accidents already occurred in industrial plants, it would be possible only after true causes are grasped. Unfortunately, however, most accident investigation carried out with the basis of legal regulation failed to grasp them so that similar accidents have been repeated without cease. This research aimed to find out differences between results from conventional accident investigation and those from human error analysis, and to draw out effective and practical counter-plans against industrial accidents occurred repeatedly in an autoglass manufacturing company. As for analysis, about 110 accident cases that occurred for last 7 years were collected, and by adopting the Comprehensive Human Error Analysis Technique developed by the previous researchers, not direct causes but basic fundamental causes that might induce workers to human errors were sought. In consequence, the result showed that facility factors or environmental factors such as improper layout, mistakes in engineering design, and malfunction of interlock system were authentic major accident causes as opposed to managerial factors such as personal carelessness or failure to wearing personal protective equipments, and/or improper work methods.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.4
• /
• pp.87-94
• /
• 2013

This study aims to research the characteristics of space composition and location for the rural community center. The phenomenon of urban areas from rural areas by the dismantlement of the community is being increasingly deepened. The current village welfare center in the rural villages of the dismantlement phenomenon of the community in rural areas can not be solved alone. The location of the Community Center in rural villages for the interaction of existing local inhabitants and should be located where possible near existing villages. This thesis studies and analyzes the characteristics of rural villages in the rural new town project districts. The basic function of the community center space analysis model is the Public service space, the Communication space, the Health space, the Amenity space, the Education space(including the childcare). This study analyze the local characterristics, the location type and the floor plan characteristics about the Community Center in rural villages by the rural new town example project.

• Journal of Korean Society of Rural Planning
• /
• v.14 no.3
• /
• pp.75-87
• /
• 2008

Changes in society organization of rural villages in our country are caused by aging society and lessening of economic activity population aggravates the economy of rural villages. With this, it joins in with the aging of village community center, the representative center space of the rural village and therefore, it is a point of view where the change is necessary in the size and the side of function. The research which it sees is made on-the-spot inspection and literature investigation compensate in behalf of 25 administrative village community centers led in the object by grasping present status and drew up the layout sketches and plane surface degrees of the village community centers. By referring to the photographs and the topographical maps taken in the spot, it was able to divide the village community centers into side of arrangement, side of plane surface and side of form and managed to seize the characters, problems and improvable directions of each of them. The research result could be used as a guidable provision and be applied in the fundamental research in developing model of village community centers during space planning in the future.

• Journal of the Korean Institute of Gas
• /
• v.10 no.3 s.32
• /
• pp.48-53
• /
• 2006

In case of fire and explosion which resulted from LP gas release of LPG vessel retail store, the populated area such as apartment complex is supposed to be damaged either partially or totally. To estimate the damage of LP gas explosion, we conducted quantitative risk analysis procedure as has been recommended by AIChE/CCPS. For incident scenario selection, event tree analysis was proposed. TNT equivalent method, SAFER Trace v.8.0 and probit model were also used for consequence analysis. The various methods and analyses which were performed in this study are presented with the effect zones in the layout.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.2
• /
• pp.23-34
• /
• 1993

Although there are numerous studies that address the problem of optimal machine grouping and part family classification for cellular manufacturing, little research has been reported that studies the conditions where cellular manufacturing is appropriate. This paper, in order to evaluate and compare the job shop with the GT cellular shop, the performance of those shops were simulated by using SIMAN. We tested the effect of independent variables including changes of product demands, intercell flow level, group setup time, processing time variability, variety of material handling systems, and job properties (ratio of processing time and material handling time). And also performance measures (dependent variables), such as machine utilization, mean flow time, average waiting time, and throughput rate, are discussed. Job shop model and GT cellular shop written in SIMAN simulation language were used in this study. These systems have sixteen machines which are aggregated as five machine stations using the macro feature of SIMAN. The results of this research help to better understand the effect of production factors on the performance of cellular manufacturing systems and to identify some of the necessary conditions required to make these systems perform better than traditional job shops. Therefore, this research represents one more step towards the characterization of shops which may benefit from cellular manufacturing.

• Journal of KIISE:Software and Applications
• /
• v.35 no.9
• /
• pp.547-553
• /
• 2008

We propose a two-stage document layout segmentation method. At the first stage, as top-down segmentation, morphological distance map algorithm extracts a collection of rectangular regions from a given input image. This preliminary result from the first stage is employed as input parameters for the process of next stage. At the second stage, a machine-learning algorithm is adopted RBF network, one of neural networks based on statistical model, is selected. In order for constructing the hidden layer of RBF network, a data clustering technique bared on the self-organizing property of Kohonen network is utilized. We present a result showing that the supervised neural network, trained by 300 number of sample data, improves the preliminary results of the first stage.

• Journal of Distribution Science
• /
• v.17 no.2
• /
• pp.25-34
• /
• 2019

Purpose - This research strives to analyze and investigate customers' perception of the dimensions of service quality at retails in Makassar Municipality of Indonesia Country. This research tries to present its results empirically, which might be helpful to prepare a strategy to improve the service quality at retail companies. Research design, data, and methodology - The research uses Parasuraman's in 1985 unmodified SERVQUAL approach. This research is conducted using a questionnaire by purposive random sampling with 150 housewives customers who are met while they are shopping. The object of the study included several retail companies such as Alfa Mart, Alfa Midi, and Indomart operating in Makassar, Indonesia, which has been serving in 2017. Analysis was conducted by quantitative descriptive analysis, measurement of variable dimensions on the questionnaire using a Likert scale, and using cartecius graph and quadrant graphs to determine the gap size of each variable. Result - This research finds that the tangible and empathy dimensions such as product layout and lighting condition should be prioritized, and the empathy dimension whose gap value is too prominent such us peak load time condition and problem-solving adjustment. Conclusion - The second priority is responsiveness dimensions, and the last priority is reliability and assurance dimensions.