• Journal of the Korean Wood Science and Technology
• /
• 제20권2호
• /
• pp.9-22
• /
• 1992

The aim of this research was to investigate physical and mechanical properties of various composition panels, each fabricated with a ratio of fiber to particle of 2 to 10. Type A consisted of fiber-faces and particle-core in layered-mat system. Type B consisted of fiberboard-faces on particleboard-core. Type C consisted of fibers and particles in mixed-mat system. The results obtained from tests of bending strength, internal bond, screw holding strength and stability were as follows: 1. The bending strength and internal bonding of both the Type A panel and the Type B panel were higher than those of the Type C panel and three-layered particle board. 2. The mechanical properties of the Type C panel showed the lowest values of all composition methods. It seems that the different compression ratios of the particle and fiber interrupted the densification of the fibers when hot pressed. 3. The dimensional stability of layered-mat system panels consising of fiber-faces and particle-core was better the than control particleboard. 4. In composition methods of particle and fiber, layered-composition method was more resonable than mixed-composition. The Type B panel had the highest mechanical properties of all the composition types. 5. The Type A panel was considered the ideal composition method because of its resistance to delamination between the particle-layer and the fiber-layer and because of its lower adhesive content and more effective manufa cturing process.

• ETRI Journal
• /
• 제32권1호
• /
• pp.112-119
• /
• 2010

We present a useful design for a free access mat which supports two frequency bands of 2.4 GHz and 5 GHz. The free access mat is a sheet-shaped waveguide which consists of a tightly coupled double-layered microstrip resonator array. It provides easy access for devices in short-range wireless communications. Interference is a common problem with conventional applications which use free space transmission. Our proposed wireless access system uses a subsidiary waveguide, the free access mat. Wireless devices are proximately coupled to the free access mat through which the coupled electromagnetic (EM) wave transmits. The arrival domain of the EM wave of an application is therefore limited to an area close to the free access mat. Wireless devices can be coupled to the free access mat at an arbitrary position without contact. We previously presented a free access mat for a single frequency band. This paper presents a free access mat for the two frequency bands of 2.4 GHz and 5 GHz. The free access mat uses a ring patch resonator array which is easily excited by typical antennas and is resistant to interference. These characteristics are demonstrated by numerical simulation and confirmed by experiment.

• 폴리머
• /
• 제33권3호
• /
• pp.219-223
• /
• 2009

전기방사 공정을 이용하여 제조된 나노파이버는 나노 소자, 필터, 방호닦, 항균성 드레싱 및 약물전달 등 다양한 분야에서 이용되고 있다. 약물전달시스템(drug delivery system, DDS)은 기존 의약품의 부작용을 최소화하며 그 효능 및 효과를 극대화할 수 있어야 하고 필요한 양의 약물을 원하는 환부에 효율적으로 전달할 수 있어야 한다. 본 연구에서는 전기유체역학공정의 하나인 전기방사공정을 이용하여, poly($\varepsilon$-carprolactone)(PCL) poly(ethylene oxide(PEO)를 나노파이버 매트로 만들었으며, 고분자와 동시 방사된 Rhodamine B의 방출량을 측정하였다. PCL/Rhodamine B/PEO/PCL 나노파이버 매트는 전기방사 시간을 통한 두께 조절을 통하여 약물전달 거동이 조절될 수 있음을 확인하였으며, 실제 Peptide를 PEO와 동시 전기방사시켜 얻어진 나노파이버 peptide가 방출되는 거동을 확인하였다. PCL/Peptide/PEO/PCL시스템에서 방출된 peptide는 약물방출 시험 후에도 약물로서의 활성도를 잃지 않았으며, 이러한 나노파이버를 이용한 Peptide 방출메커니즘은 새로운 약물전달시스템으로 적용 및 응용될 수 있을 것으로 예상된다.