• Journal of the Korean Wood Science and Technology
• /
• v.20 no.2
• /
• pp.9-22
• /
• 1992

The aim of this research was to investigate physical and mechanical properties of various composition panels, each fabricated with a ratio of fiber to particle of 2 to 10. Type A consisted of fiber-faces and particle-core in layered-mat system. Type B consisted of fiberboard-faces on particleboard-core. Type C consisted of fibers and particles in mixed-mat system. The results obtained from tests of bending strength, internal bond, screw holding strength and stability were as follows: 1. The bending strength and internal bonding of both the Type A panel and the Type B panel were higher than those of the Type C panel and three-layered particle board. 2. The mechanical properties of the Type C panel showed the lowest values of all composition methods. It seems that the different compression ratios of the particle and fiber interrupted the densification of the fibers when hot pressed. 3. The dimensional stability of layered-mat system panels consising of fiber-faces and particle-core was better the than control particleboard. 4. In composition methods of particle and fiber, layered-composition method was more resonable than mixed-composition. The Type B panel had the highest mechanical properties of all the composition types. 5. The Type A panel was considered the ideal composition method because of its resistance to delamination between the particle-layer and the fiber-layer and because of its lower adhesive content and more effective manufa cturing process.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.112-119
• /
• 2010

We present a useful design for a free access mat which supports two frequency bands of 2.4 GHz and 5 GHz. The free access mat is a sheet-shaped waveguide which consists of a tightly coupled double-layered microstrip resonator array. It provides easy access for devices in short-range wireless communications. Interference is a common problem with conventional applications which use free space transmission. Our proposed wireless access system uses a subsidiary waveguide, the free access mat. Wireless devices are proximately coupled to the free access mat through which the coupled electromagnetic (EM) wave transmits. The arrival domain of the EM wave of an application is therefore limited to an area close to the free access mat. Wireless devices can be coupled to the free access mat at an arbitrary position without contact. We previously presented a free access mat for a single frequency band. This paper presents a free access mat for the two frequency bands of 2.4 GHz and 5 GHz. The free access mat uses a ring patch resonator array which is easily excited by typical antennas and is resistant to interference. These characteristics are demonstrated by numerical simulation and confirmed by experiment.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.219-223
• /
• 2009

The nanofibers fabricated by using an electrohydrodynamic process has been used as various applications, such as nano-device, filtering system, protective clothes, wound dressing, and drug delivery system (DDS). Of these applications, the DDS should be needed to minimize side effects of drugs, maximize the properties of medicine, and efficiently deliver the required amount of drugs to the diseased area. In this paper, by using the electro spinning process, which is one of electrohydrodynamic processes, two different types, polycarprolactone and poly(ethylene oxide)/Rhodamine B, of electrospun mats were fabricated layer by layer and the release behavior of Rhodamine B was characterized with time. In addition, to show the feasibility of DDS of this type, we tested release behavior of a peptide of the nanofiber system, a PCL/(Peptide+PEO)/PCL nanofiber mat. The released peptide did not loss biological activities. From these results, we believe that the layered nanofiber mat as a DDS has enough function of a new drug delivery system.