• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.9
• /
• pp.3870-3884
• /
• 2020

The proposed framework of Four Layer Robust Storage in Cloud (FLRSC) architecture involves host server, local host and edge devices in addition to Virtual Machine Monitoring (VMM). The goal is to protect the privacy of stored data at edge devices. The computational intelligence (CI) part of our algorithm distributes blocks of data to three different layers by partially encoded and forwarded for decoding to the next layer using hash and greed Solomon algorithms. VMM monitoring uses snapshot algorithm to detect intrusion. The proposed system is compared with Tiang Wang method to validate efficiency of data transfer with security. Hence, security is proven against the indexed efficiency. It is an important study to integrate communication between local host software and nearer edge devices through different channels by verifying snapshot using lamport mechanism to ensure integrity and security at software level thereby reducing the latency. It also provides thorough knowledge and understanding about data communication at software level with VMM. The performance evaluation and feasibility study of security in FLRSC against three-layered approach is proven over 2³² blocks of data with 98% accuracy. Practical implications and contributions to the growing knowledge base are highlighted along with directions for further research.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.938-941
• /
• 2006

We present a new design method of one-dimensional multi-layered acoustic foams for transmission loss maximization by topology optimization. Multi-layered acoustic foam sequences consisting of acoustic air layers and poroelastic material layers are designed for target frequency values. For successful topology optimization design of multi-layered acoustic foams, the material interpolation concept of topology optimization is adopted. In doing so, an acoustic air layer is modeled as a limiting poroelastic material layer; acoustic air and poroelastic material are handled by a single set of governing equations based on Biot's theory. For efficient analysis of a specific multi-layered foam appearing during optimization, we do not solve the differential equations directly, but we use an efficient transfer matrix approach which can be derived from Biot's theory. Through some numerical case studies, the proposed design method for finding optimal multi-layer sequencing is validated.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.49-60
• /
• 1999

This paper addresses a welding task sequencing for robot arc welding process planning. Although welding task sequencing is an essential step in the welding process planning, it has not been considered through a systematic approach, but it depends rather on empirical knowledge. Thus, an effective task sequencing for robot arc welding is required. Welding perations can be classified by the number of welding robots. Genetic algorithms are applied to tackle those welding task sequencing problems. A genetic algorithm for traveling salesman problem (TSP) is utilized to determine welding task sequencing for a MultiWeldline-SingleLayer problem. Further, welding task sequencing for multiWeldline-MultiLayer welding is investigated and appropriate genetic algorithms are introduced. A random key genetic algorithm is also proposed to solve multi-robot welding sequencing : MultiWeldline with multi robots. Finally, the genetic algorithm are implemented for the welding task sequencing of three dimensional weld plate assemblies. Robot welding operations conforming to the algorithms are simulated in graphic detail using a robot simulation software IGRIP.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1458-1467
• /
• 1999

VLSI 공정 기술이 발달하면서 이웃한 전선 간의 간격이 점점 더 가까워 지고 있으며, 그에 따라 인접 전선 간의 혼신 문제가 심각해지고 있다. 본 논문에서는 3층 그리드 채널 배선에 적용 가능한 혼신을 최소화시키는 배선층 할당 방법을 제안한다. 이 방법은 선형 의사 불린 최적화 기법에 맞도록 고안되었으며, 적절한 변수 선택 휴리스틱과 상한값 추정 방법을 통하여 최적의 결과를 짧은 시간 안에 찾아낸다. 실험 결과를 통하여, 일반적인 0/1 정수 선형 프로그래밍 기법과 비교하여 성능과 수행시간 면에서 우수함을 보인다. Abstract Current deep-submicron VLSI technology appears to cause crosstalk problem severe since it requires adjacent wires to be placed closer and closer. In this paper, we deal with a horizontal layer assignment problem for three layer HVH channel routing to minimize coupling capacitance, a main source of crosstalk. It is formulated in a 0/1 integer linear programming problem which is then solved by a linear pseudo boolean optimization technique. Experiments show that accurate upper bound estimation technique effectively reduces crosstalk in a reasonable amount of running times.

• International Journal of Contents
• /
• v.7 no.1
• /
• pp.14-22
• /
• 2011

Temporal Sign Language Recognition (TSLR) from hand motion is an active area of gesture recognition research in facilitating efficient communication with deaf people. TSLR systems consist of two stages: a motion sensing step which extracts useful features from signers' motion and a classification process which classifies these features as a performed sign. This work focuses on two of the research problems, namely unknown time varying signal of sign languages in feature extraction stage and computing complexity and time consumption in classification stage due to a very large sign sequences database. In this paper, we propose a combination of Dynamic Time Warping (DTW) and application of the Single hidden Layer Feedforward Neural networks (SLFNs) trained by Extreme Learning Machine (ELM) to cope the limitations. DTW has several advantages over other approaches in that it can align the length of the time series data to a same prior size, while ELM is a useful technique for classifying these warped features. Our experiment demonstrates the efficiency of the proposed method with the recognition accuracy up to 98.67%. The proposed approach can be generalized to more detailed measurements so as to recognize hand gestures, body motion and facial expression.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.453-462
• /
• 1994

Variation of seismic wave field in a multi-layered attenuating elastic half space is studied by the propagator matrix method and point source models of which fault-slip functions are defined as ramp functions. In this paper, the earth is modeled as being composed of horizontally stratified layers, with uniform material properties for each layer. The partial differential equations for the seismic motion in each layer are solved using a Fourier Hankel transform approach. Time histories and frequency contents of accelerations and displacements due to a vertical dip-slip and strike-slip point source located in the underlain half space are calculated at the layer interfaces using the developed programs and their characteristics are represented.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.306-310
• /
• 2018

In order to develop a highly sensitive infrared sensor, it is necessary to develop techniques for decreasing the rate of heat absorption and the transition of the absorption wavelength to a longer wavelength, both of which can be induced by decreasing the pixel size of the bolometer. Therefore, in this study, $1{\mu}m$ hole-arrays with a subwavelength smaller than the incident infrared wavelength were formed on the amorphous silicon-based microbolometer pixels in the absorber, which consisted of a TiN absorption layer, an a-Si resistance layer and a SiNx membrane support layer. We demonstrated that it is possible to reduce the thermal time constant by 16% relative to the hole-patternless bolometer, and that it is possible to shift the absorption peak to a shorter wavelength as well as increase absorption in the $4-8{\mu}m$ band to compensate for the infrared long-wavelength transition. These results demonstrate the potential for a new approach to improve the performance of high-resolution microbolometers.

• Structural Engineering and Mechanics
• /
• v.34 no.4
• /
• pp.449-474
• /
• 2010

A smart hollow cylinder consisting of a host functionally graded elastic core layer and two surface homogeneous piezoelectric layers is presented in this paper. The bonding between the layers can be perfect or imperfect, depending on the parameters taken in the general linear spring-layer interface model. The effect of such weak interfaces on free vibration and steady-state response is then investigated. Piezoelectric layers at inner and outer surfaces are polarized axially or radially and act as a sensor and an actuator respectively. For a simply supported condition, the state equations with non-constant coefficients are obtained directly from the formulations of elasticity/piezoelasticity. An approximate laminated model is then introduced for the sake of solving the state equations conveniently. It is further assumed that the hollow cylinder is embedded in an elastic medium and is simultaneously filled with compressible fluid. The interaction between the structure and its surrounding media is taken into account. Numerical examples are finally given with discussions on the effect of some related parameters.

• Wind and Structures
• /
• v.13 no.2
• /
• pp.145-167
• /
• 2010

By using the 'failure' model approach, the effects of wind direction on the flight of sheathing panels from the roof of a model house in extreme winds was investigated. A complex relationship between the initial conditions, failure velocities, flight trajectories and speeds was observed. It was found that the local flow field above the roof and in the wake of the house have important effects on the flight of the panels. For example, when the initial panel location is oblique to the wind direction and in the region of separated flow near the roof edge, the panels do not fly from the roof since the resultant aerodynamic forces are small, even though the pressure coefficients at failure are high. For panels that do fly, wake effects from the building are a source of significant variation of flight trajectories and speeds. It was observed that the horizontal velocities of the panels span a range of about 20% - 95% of the roof height gust speed at failure. Numerical calculations assuming uniform, smooth flow appear to be useful for determining panel speeds; in particular, using the mean roof height, 3 sec gust speed provides a useful upper bound for determining panel speeds for the configuration examined. However, there are significant challenges for estimating trajectories using this method.

• Journal of Chest Surgery
• /
• v.2 no.1
• /
• pp.59-64
• /
• 1969

Three cases of traumatic diaphragmatic hernia were repaired in this department from June 1967 to Nov.1968. The first case, a 14 year old girl, was diagnosed as diaphragmatic hernia during the operation of the diffuse peritonitis from jejunaI perforation 3 days after the traffic accident at local clinic and she was transfered to this hospital after the closure of the perforated jejunum. Herniated stomach, transverse colon, spleen and left lobe of the liver were repositioned and the diaphragmatic rupture at the posterolateral portion of the left diaphragm was repaired with two layer sutures by transthoracic approach. The second case. a 26 year old man. was diagnosed immediately after the traffic accident at local clinic and transfered to this hospital 24 hours later. Herniated and distended stomach, transverse colon and jejunum were repositioned and the large diaphragmatic rupture, about 9 cm in length, from the posterolateral portion to the base of the pericardium was directly repaired with two layer sutures. The third case, a 26 year old man, who had a history of stab wound at left lower lateral chest two years ago,was admitted with the sudden onset of abdominal pain and vomiting. The diaphragmatic hernia was confirmed with barium enema. The herniated stomach and transverse colon through the defect, about 3.5 cm in diameter, at anterolateral portion of the left diaphragm, were repositioned and the defect was repaired with two layer sutures. All of the cases recovered uneventfully.