• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.18-25
• /
• 2005

We derive refraction statics for seismic data recorded in a hard rock terrain, in which there are large and rapid variations in the depth of weathering. The statics corrections range from less than 10 ms to more than 70 ms, often over distances as short as 12 receiver intervals. This study is another demonstration of the importance in obtaining accurate initial refraction models of the weathering in hard rock terrains in which automatic residual statics may fail. We show that the statics values computed with a simple model of the weathering using the Generalized Reciprocal Method (GRM) and the Refraction Convolution Section (RCS) are comparable in accuracy to those computed with a more complex model of the weathering, using least-mean-squares inversion with the conjugate gradient algorithm (Taner et al., 1998). The differences in statics values between the GRM model and that of Taner et al. (1998) systematically vary from an average of 2ms to 4ms over a distance of 8.8 km. The differences between these two refraction models and the final statics model, which includes the automatic residual values, are generally less than 5 ms. The residuals for the GRM model are frequently less than those for the model of Taner et al. (1998). The RCS statics are picked approximately 10 ms later, but their relative accuracy is comparable to that of the GRM statics. The residual statics values show a general correlation with the refraction statics values, and they can be reduced in magnitude by using a lower average seismic velocity in the weathering. These results suggest that inaccurate average seismic velocities in the weathered layer may often be a source of short-wavelength statics, rather than any shortcomings with the inversion algorithms in determining averaged delay times from the traveltimes.

• Geophysics and Geophysical Exploration
• /
• v.8 no.3
• /
• pp.201-206
• /
• 2005

Interpretation of high-resolution seismic profiles from the southeastern continental shelf of Korea reveals that the sedimentary deposits consist of seven seismic units formed during the late Quaternary. These units comprise lowstand, transgressive, and highstand systems tracts. The lowstand systems tract consists of a lowstand prograding wedge (SU1) and a mass flow deposit (SU2) including slumps and slides. The transgressive systems tract contains four seismic units: an ancient beach/shoreface deposit (SU3), a channel-fill deposit (SU4), a transgressive sand layer (SU5), and a transgressive sand ridge (SU6). The highstand systems tract consists of an inner-shelf mud deposit (SU7) derived from the Nakdong and Seomjin rivers during the last 6 ka when sea level was close to the present level.

• Korean Journal of Plant Resources
• /
• v.34 no.2
• /
• pp.144-155
• /
• 2021

This study was conducted to analyze community structure and species composition of Abies koreana forest. Field survey was carried out from June, 2019 to 2020, September. 121 plots (20×20 m) were set up, 5 herb layer plots (3×3 m) were constructed for each plot, and there, Diameter at Breast Height(DBH), height, environmental factor were measured. It was analyzed that water stress did not have a significant effect on the factors affecting the growth of A. koreana in Mt. Halla-san, and in the case of Mt. Deokyu-san, the more forest stands located at the ridge, the higher the tree density. It was found that the factors affecting the distribution of Abies koreana were not consistent according to the environment of study site.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.496-503
• /
• 2021

Pinus densiflora is an essential tree species native to the Republic of Korea (ROK) and covers most of the total natural forest areas in the ROK. This study was conducted to understand the site characteristics and stand structure of P. densiflora forests distributed at sites where P. densiflora covered over 50% of the stand basal area during the 7th National Forest Inventory (NFI) period from 2016 to 2020. P. densiflora dominated 3,665 circular sample plots (400 m²). P. densiflora forests predominated at elevations less than 600 m above sea level (a.s.l). However, most P. densiflora forests were distributed at the slopes facing south and west over 800 m a.s.l. At altitudes below 800 m, they were distributed at all slopes but dominated at the southern and western slopes. P. densiflora grew mainly in the soils of sandy loam, loam, or silt loam with relative infertility. Dominant tree species distributed with P. densiflora were Quercus mongolica, Q. variabilis, Q. serrata, Prunus serrulata var. pubescens and Castanea crenata by the descending order. P. densiflora, P. thunbergii, and P. rigida were grown in large DBH classes, Quercus species and Fraxinus rhynchophylla in middle DBH classes, while Juniperus rigida and Styrax japonicus in small DBH classes. Dominant tree species distributed mainly at the lower layer of P. densiflora stands were Rhododendron mucronulatum, Q. serrata, Lindera obtusiloba, Fraxinus sieboldiana, Toxicodendron trichocarpum and Rhododendron schlippenbachii by the descending order.

• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.50-55
• /
• 2010

The R-r:standard (R-r:std) allele of maize R gene complex consists of S subcomplex and P component; the S subcomplex regulates anthocyanin pigmentation of seed aleurone layer, and the P component confers pigmentation of the other plant parts. The S subcomplex contains two functional genes, S1 and S2 components. In the presence of Pl gene some alleles of R gene induce anthocyanin pigmentation of pericarp. In the present study, the effects of different R alleles on the anthocyanin pigmentation of pericarp in the presence of Pl gene were analyzed in order to identify the R gene component responsible for pericarp pigmentation. The results show that R-ch and r-ch alleles condition similar degrees of pericarp pigmentation, and that R-r:Ecuador (R-r:Ec) conditions stronger pigmentation. The r-ch allele, which is inferred that its S subcomplex has lost function but the P component is normal, induces pericarp pigmentation in the presence of Pl gene. On the contrary, the R-g:g1111 allele, derived from R-r:Ec and inferred that its S subcomplex functions normal but the P component has lost its function, did not induce pericarp pigmentation in the presence of Pl gene. Moreover, PCR analysis of genomic DNA's of R-ch and r-ch indicate that R-ch maintains both P and S1 components, whereas r-ch lacks for the S1 component. Taken together, The results suggest that the P components of R alleles inducing pericarp pigmentation in the presence of Pl gene are responsible for pericarp pigmentation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.209-216
• /
• 2019

Ultraviolet rays (UV) cause photoaging by inducing skin photodamages such as erythema and sunburn. Silymarin is a mixture of antioxidant polyphenols extracted from Silybum marianum fruit (S. m), which is known as milk thistle. It is known to protect skin tissues from UV treatment and antioxidant effects. In this study, we aimed to identify the photoprotective effects of S. m extract, which has silymarin in the epidermis layer of the skin. We found that the extract can function as a UV filter, so it can reduce DNA damage by UV treatment. Especially, we found that, in the stratum corneum, the extract can suppress the protein carbonylarion and DNA damages caused by suberythemal dose of UV treatment which does not induce erythema in the skin. UV treatment also increased protein carbonylation levels in the stratum corneum by oxidation, but it was prevented by applying the extract. The extract can absorb UV with minimal phototoxicity. Together, our study suggests that S. m extract can be used as a photo-protective ingredient to avoid photoaging of the skin.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.133-151
• /
• 2019

This study aims to analyze cold air characteristics in the watershed areas and to suggest strategies for utilizing them in urban ventilation corridor plans. For this purpose, the Jungnangcheon watershed and Uijeongbu-si in the northern part of Gyeonggi province, and Anyangcheon watershed as well as Yangjaecheon Tancheon watershed and Gwacheon-si in the southern part were selected as study areas. We used KALM (Kaltluftabflussmodell), a cold air simulation model developed in Germany and identified both the cold air flow and the height of cold air layer generated during 6 hours at night. Uijeongbu City is located on the main stream of the Jungnangcheon watershed, and the local cold air from the southern outskirts is an important part of Uijeongbu-si's overall ventilation corridor planning. In addition, the cold air generated in the vicinity of Mt. Sapae flows into the central business district near the city hall and plays a major role in regulating the thermal environment of the city. But, the cold air flows in the eastern part of Uijeongbu-si was not smoothly. The cold air flow generated in the east of Gwanak Mountain and in the west of Cheonggye Mountain was the most active in the northern part of Gwacheon-si. This flow is also a major ventilation corridor in Anyangcheon watershed as well as Yangjaecheon Tancheon watershed. But, the southern part where the cold air flow is not smooth is planed to be developed as 'Gwacheon Knowledge Information Town Public Housing District', so rapid development is expected in the future. Hence, it is suggested that an additional ventilation corridor plan should be established based on the detailed local wind flow analysis.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.40-61
• /
• 2009

A new construction methodology has been proposed on a scientific basis to reason a rational explanation for the structure and the present configuration of Chum-Sung-Dae. This is because there is no way to otherwise explain the gap between our expectation that the people in Shilla are assumed to be and the problems, such as the use of a temporary supporting structure including falsework, the use of a conveying device for stonework and the practice of soil fill, raised when the construction method in nowadays is applied to the structure. Furthermore, it is because the questions, such as the difference of an azimuth angle between the southward opening and the square podium, the skewed circular plan in layers of the body, misalignment between neighboring layers of the body, disagreement between the inclination due to slight sidesway and the eccentricity in each layer of the circular body, perfectly aligned vertical and horizontal joints and the existence of soil fill, raised from the present configuration of Chum-Sung-Dae, also require a reasonable explanation based on scientific evidences, if any. Therefore, the proposed new construction methodology, in which the soil hill outside as well as the soil fill inside the Chum-Sung-Dae may have been utilized as a temporary scaffolding system for construction, is the highly probable one that the builders of Chum-Sung-Dae might have inevitably employed. The existence of great tombs, scattered in Hwang-Nam-Dong close to Chum-Sung-Dae, implies that the people of Shilla might have accepted the proposed new construction methodology as a natural one.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.75-83
• /
• 2019

In order to fulfill the obligation to voluntarily reduce greenhouse gas emissions under the Paris Climate Agreement, the proportion of coal and nuclear power generation is reduced worldwide and national efforts are being made to spread renewable energy including solar power generation. Korea also intends to increase the proportion of renewable energy generation to 30~35% by 2040 by introducing laws and regulations. In addition, while the country is trying to apply solar power generation to sidewalks and roads, there is no research related to it in Korea. Therefore, as a precedent study to develop solar power generation roads, solar power generation concrete blocks applicable to sidewalks and plazas were developed and the applicability was evaluated by constructing them on the site. As a result of indoor experiment, compressive strength was measured by 25.5~35.7MPa and flexural strength was measured by 5.1~10.5MPa, which showed that all domestic standards were satisfied. However, the higher the unit cement amount, the lower the strength was measured according to the mixing of the broken fine aggregate. The absorption rate was 5.7%, which satisfied the domestic standard of 7% or less. As a result of the freeze-thawing test, the reduction rate of the compressive strength after 100 cycles was up to 6.3%. As a result of measuring the settlement amount after construction, the maximum of 2.498mm was measured and irregular settlement occurred in the overall area, which is because the resolution of the sand layer was poor during construction. Maintenance techniques of sidewalk concrete block and solar panel need to be established more efficiently through long-term operation in the further.

• Resources Recycling
• /
• v.28 no.4
• /
• pp.44-50
• /
• 2019

In the electric arc furnace process, the chemical energy such as the heat of oxidation reaction and the heat of carbon combustion etc. is consumed as 30% of the total input energy. In order to reduce $CO_2$ emission in EAF, it is necessary to decrease the use of electric power energy during scrap melting stage and increase the use of chemical energy. In general, when the carbon materials is individually charged into the molten steel, the carbon materials floated to the slag layer due to low density before it is dissolved in molten steel. When the concentration of carbon in the molten steel is high, the combustion energy of carbon by oxygen injection can lower the electric power energy and improve the chemical energy consumption. Therefore, an efficient charging methods of carbon material is required to increase the efficiency of carbon combustion heat. On the other hand, Al-dross, which is known as a by-product after Al smelting, includes over 25 mass% of metallic Al, and the oxidation heats of Al is lager than that of carbon. However, the recycling ratio fo Al-dross was very low and is almost landfilled. In order to effectively utilize the heats of oxidation of Al in Al-dross, it is necessary to study the application of Al-dross in the steel process. In this study, the dissolution efficiency of carbon and aluminum in molten steel was investigated by varying the reaction temperature and the mixing ratios of coke and Al-dross.