• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• 제23권2호
• /
• pp.89-95
• /
• 2017

Although the global coffee market is growing every year and the demand for coffee wrapping paper is increasing accordingly, research on the effect of PE material and PP material on the coffee aroma used in the sealant layer, which will directly contact the product, is lacking. In this study, we studied the change of aroma patterns and flavor materials by adding coffee to PP and PE pouches. In addition, we observed changes in aroma patterns depending on the temperature and the presence of the deoxidizer. As a result, it was found that the PP type packaging material was slightly better than the PE type packaging material, but the performance was hardly changed by the material. Rather, the change in the aroma pattern due to temperature was dominant rather than the material. It is ideal that refrigerated distribution ($4^{\circ}C$) is the best storage temperature and sales are done within a short period of time. Among the indicators, pyridine was the most suitable material to study and there are many data about pyridine. Therefore, it is expected that the results can be derived by using pyridine.

• Wind and Structures
• /
• 제31권2호
• /
• pp.143-152
• /
• 2020

The wind design of buildings is typically based on strength provisions under ultimate loads. This is unlike the ductility-based approach used in seismic design, which allows inelastic actions to take place in the structure under extreme seismic events. This research investigates the application of a similar concept in wind engineering. In seismic design, the elastic forces resulting from an extreme event of high return period are reduced by a load reduction factor chosen by the designer and accordingly a certain ductility capacity needs to be achieved by the structure. Two reasons have triggered the investigation of this ductility-based concept under wind loads. Firstly, there is a trend in the design codes to increase the return period used in wind design approaching the large return period used in seismic design. Secondly, the structure always possesses a certain level of ductility that the wind design does not benefit from. Many technical issues arise when applying a ductility-based approach under wind loads. The use of reduced design loads will lead to the design of a more flexible structure with larger natural periods. While this might be beneficial for seismic response, it is not necessarily the case for the wind response, where increasing the flexibility is expected to increase the fluctuating response. This particular issue is examined by considering a case study of a sixty-five-story high-rise building previously tested at the Boundary Layer Wind Tunnel Laboratory at the University of Western Ontario using a pressure model. A three-dimensional finite element model is developed for the building. The wind pressures from the tested rigid model are applied to the finite element model and a time history dynamic analysis is conducted. The time history variation of the straining actions on various structure elements of the building are evaluated and decomposed into mean, background and fluctuating components. A reduction factor is applied to the fluctuating components and a modified time history response of the straining actions is calculated. The building components are redesigned under this set of reduced straining actions and its fundamental period is then evaluated. A new set of loads is calculated based on the modified period and is compared to the set of loads associated with the original structure. This is followed by non-linear static pushover analysis conducted individually on each shear wall module after redesigning these walls. The ductility demand of shear walls with reduced cross sections is assessed to justify the application of the load reduction factor "R".

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권12호
• /
• pp.1789-1794
• /
• 2003

Two experiments were conducted to evaluate the effect of substituting different levels of hazelnut kernel oil meal (HKOM) for dehulled soyabean meal (DSBM) in diets for Japanese quail. Five diets in which HKOM was replaced with 0, 25, 50, 75 and 100% of DSBM protein in a growing diet for a 5 week period using 450 Japanese quails of initial age of 1 week and in a layer diet for a 112 days period using 180 Japanese laying quails of initial age of 7 week were examined in experiments 1 and 2, respectively. Hence, treatment groups were: control (0 HKOM), 0.25 HKOM, 0.50 HKOM, 0.75 HKOM and 1HKOM. In the experiment 1, 1 HKOM decreased BWG compared with the 0 HKOM and 0.25 HKOM, while it increased FCR compared with the 0HKOM at day 21 (p<0.05). Compared with the other groups, 0.75 HKOM and 1 HKOM decreased BWG (p<0.01) at day 28. While the FCR of 1 HKOM was higher (p<0.01) than that of 0 HKOM, 0.25 HKOM and 0.50 HKOM, respectively, that of 0.75 HKOM was higher than that of 0 HKOM and 0.25 HKOM diets at day 28. However, at day 42 of age, BWG, FCR and the feed intake (FI) were not affected (p>0.05) by inclusion of HKOM. Mortality rate, carcase yield and liver, heart and gizzard weight (% of body weight) were not affected (p>0.05) by inclusion of HKOM to the diet. In the experiment 2, egg production was decreased (p<0.05) by the 1 HKOM diet compared with the 0.50 HKOM diet. While FCR increased by the 1 HKOM diet compared with the 0.25 HKOM and 0.50 HKOM diets (p<0.05). Feed intake for quails fed with the 0 HKOM diet was higher (p<0.05) than for quails fed with 0.50 HKOM diet. The egg yolk weight for 0 HKOM diet group was lower (p<0.05) than for quails in 1 HKOM diet group. In conclusion, the results indicate that DSBM can be replaced by HKOM in diets for growing and laying Japanese quails. However 50% HKOM has higher laying performance than 100% HKOM in the laying period.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권9호
• /
• pp.4217-4222
• /
• 2016

Purpose: To compare the expression level of CK 15 in normal esophageal and esophageal squamous-cell carcinoma (ESCC) tissues and analyse possible functions of CK15 in occurrence and development. Materials and Methods: Immunohistochemistry was used to compare CK14, CK15 and proliferating cell nuclear antigen (PCNA) expression levels in ESCCs. Expression level of CK15 was also assessed by Western blotting. In addition, levels of CK15, cytokeratin 19 fragment antigen 21-1 (CYFRA21-1) and PCNA were detected in serum by enzymelinked immunosorbent assay (ELISA) and chemiluminescence methods. Relationships between clinicopathological parameters and CK14 and CK15 expression were then analyzed. Results: According to immunohistochemistry, in esophageal and intraepithelial neoplasia (SIN) tissues, the expression of CK14, CK15 and PCNA localized to basal layer of the epithelium. CK14 and CK15 levels were higher in normal esophageal squamous epithelial tissue than in SIN and ESCC, and greater in highly differentiated than poorly differentiated carcinoma tissue. By Western blotting, we found more pronounced expression of CK15 in normal esophageal tissue, compared with carcinoma tissue. The specificity of changed CK15 and CYFRA21-1 expression was respectively 90.0% and 96.7% in serum of ESCC patients. Joint detection could improve the sensitivity of esophageal carcinoma diagnosis. Relationships between CK14, CK15 expression and clinical parameters were not statistically significant (P>0.05). Postoperative survival in patients of CK14, CK15 positive expression was longer than with negative expression ($x^2=4.35$, P=0.037; $x^2=9.852$, P=0.002). Conclusions: CK15 expression decreased in esophageal squamous cell carcinoma tissue and serum of esophageal squamous carcinoma patients. We infer that CK15 may play an important role for the occurrence and development of esophageal squamous-cell carcinoma. In the future, CK15 may be used for the diagnosis, treatment and prognostic evaluation of esophageal squamous-cell carcinoma.

• Journal of the Microelectronics and Packaging Society
• /
• 제24권1호
• /
• pp.45-50
• /
• 2017

We investigated effect of Zn content on shear strengh of Sn-0.7Cu-xZn and OSP surface finished solder joints. Five pastes of Sn-0.7Cu-xZn (x=0, 0.5, 1.0, 1.5, 2.0 wt.%) solders were fabricated by mixing of solder powder and flux using planatary mixer. $180{\mu}m$ diameter solder balls were formed on OSP surface finished Cu electrodes by screen print method, and the reflow process was performed. The shear strength was evaluated with two high shear speeds; 0.01 and 0.1 m/s. The thickness of the intermetallic compound(IMC) layer was decreased with increasing Zn content in Sn-0.7Cu-xZn solder. The highest shear strength was 3.47 N at the Zn content of 0.5 wt.%. As a whole, the shear strength at condition of 0.1 m/s was higher than that of 0.01 m/s because of impact stress. Fracture energies were calculated by F-x (Force-displacement) curve during high speed shear test and the tendency of fracture energy and that of shear strength were good agreement each other. Fracture took place within solder matrix at lower Zn content, and fracture occured near the interface of OSP surface finished Cu electrode and solder at higher Zn content.

• Korean Journal of Environment and Ecology
• /
• 제28권2호
• /
• pp.128-141
• /
• 2014

This study established a plan to establish the roadside green for enhancing the urban green network and enhancing of urban greenery in Songpa-gu. As for the present conditions of the streets, that of the parks, the green axes, sidewalk in Songpa-gu were analyzed. This study derived 19 parks by the roadside and 13 lines to connect green axes. The result of roadside greenery status were selected 56,546m lines by natural green space and constructed green space. The result of sidewalks width were selected 8,600m lines that sidewalks width more than 5m for enhancing urban green network in Songpa-gu. For enhancing the urban green network lines were selected: Olympic Expressway, Songpa-daero, Nambusunhwan-no and Wiryeseong-gil. To improve the street planting strips, two plans were suggested: to improve the green structures of the street planting strips mainly with shrubs and to effectively create street planting strips through the green spaces along the streets. A plan to promote the amount of planting street trees in Songpa-gu analyzed the streets. Complements the understory layer sections were the highest the entire length of 34,206 m of 63.6% in strengthening for network streets. Greenspace network streets were calculated for planting of volume by promotion plan. Planting volume increased 4,708 trees before expand planting plan, so the total tree was considered 9,518 trees.

• Korean Journal of Plant Resources
• /
• 제14권1호
• /
• pp.15-23
• /
• 2001

Effects of growth regulators, scion length and scion diameter on shooting and seedling characteristics were investigated to increase seedling products by root cuttings of lacquer tree. Shoots developed and emerged above-ground from the root scion at 3∼5 weeks after cut plating, most of that was a shoot but some of that were 2∼3 shoots. Otherwise, non-shooting was the reason that cortical layer was decayed. Soaking in zeatin was the most effective on shooting of root cuttings and high concentration was effective. Also soaking on high contents of BA or kinetin was effective on shooting but was lower totally than soaking on zeatin. Seedling characteristics among 3 growth regulators and 3 concentrations were not any difference in statistical significant, but were move excellent than control. As root scion was tall, shoots were developed at early. 15cm length scion was the most excellent to use seedlings but 3cm length scion was wickedness. 10cm scion, however, was highest to product of seedlings than any others. 0.3∼0.5 cm length scion was showed 76% shooting rate at 10 weeks after cut planting, but seedling characteristics were not any difference among the kind of 3 diameters.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• 제45권4호
• /
• pp.415-422
• /
• 2019

Human epidermal stem cells(ESCs) residing in the basement membrane of the skin have an important role in maintenance of skin homeostasis of epidermal layer. Although, ESCs provide new cells to repair damaged tissue in response to tissue injury, subsets of stem cells remain in the quiescent state protected from differentiation and senescence for prolonged survivals. In this perspective, the stem cell niche, which is specific microenvironment composed of niche cells and an extracellular matrix(ECM), supplies the relevant signal to save stem cells from microenvironmental damages. The expression of stemness marker on the surface of ESCs contributes to the attachment on their ECM of the basement membrane, which lead to growth potential and apoptotic resistance against environmental stimuli. In this study, we observed that UV irradiation, a major factor of environmental stimuli, reduced the expression of α2, β1 and α6 integrin in ESCs. Rhus Semialata M extract(RSE) showed inhibitory effect on the UVB-induced reduction of integrin expression. Furthermore, RSE could upregulate the expression of Col-IV and Laminin, which contribute to the attachment of ESCs. These results indicated that RSE could be a potent ingredient for the protection of ESCs from UV irradiation by increasing the expression of integrin and substrate ECM components at their niche.

• Journal of the Korean Geophysical Society
• /
• 제9권1호
• /
• pp.37-45
• /
• 2006

Velocity structures were defined in the vicinty of the 140-m deep test borehole in the pungam basin through simultaneous inversion of surface seismic refraction and far-ofset VSP traveltime data. Seismicenergy generated at the surface by a seisgun was recorded both at 42 surface locations at 3-m intervalsalong the profiles in the N20E and its orthogonal directions and at 71 m depth in the borehole. Forthe ofset VSP study, seismic energy was generated by a 5 kg sledgehamer at the surface in the horizontal ofset range of -19.5∼+19.5 m from the borehole. The seismic signals were detected at 9∼99 m depths with 1∼2 m intervals and recorded for 204 ms per shot. After shot static corrections,first-arrival times picked from both the surface refraction and borehole records were simultaneouslyinverted to yield velocity tomograms. The tomograms indicate that a 1.5 m thick soil layer with velocities les than 500 m/s overlies basements having a velocity range of 3,067 ∼5,717 m/s. Within the basements,∼4 m and deeper than 71 m. The high-velocit yzones may be due to conglomerates intercalated with sandstones and siltstones. No evidence for large-scale fracture zones or faults is detected near the borehole

• Journal of Ginseng Research
• /
• 제32권4호
• /
• pp.291-299
• /
• 2008

The fresh ginseng roots were extracted in aqueous methanol (MeOH), and the obtained extracts were partitioned using ethyl acetate (EtOA), n-butanol (n-BuOH), and water, successively. The repeated silica gel column chromatography for n-BuOH fraction afforded a purified ginsenoside $Rg_1$. The physico-chemical, spectroscopic and chromatographic data of ginsenoside $Rg_1$, such as crystallization characteristics, melting point, specific rotation, infrared spectrometry (IR) data, fast atom bombardment/mass spectrometry (FAB/MS) data, nuclear magnetic resonance (NMR) data, retention factor (Rf) in thin layer chromatography (TLC) experiment, and retention time (r.t.) in HPLC analysis, were measured and compared with those reported in literatures. Especially, the previous literatures reported different data for ginsenoside $Rg_1$ in the $^{1}H-$ and $^{13}C$-NMR experiments. This paper gives the exactly assigned NMR data through 2D-NMR experiments, such as $^{1}H-^{1}H$ correlation spectroscopy (COSY), hetero nuclear single quantum correlation (HSQC), and hetero nuclear multiple bond connectivity (HMBC).