• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.8
• /
• pp.993-999
• /
• 2010

Serum lysozyme gene is one of the important genes influencing the immune system as its product can cause lysis of bacterial cell wall by cleaving the peptidoglycan layer. The present investigation on the serum lysozyme gene of Indian riverine buffalo was undertaken with the objectives to identify and characterize single nucleotide polymorphic patterns by PCR-SSCP method as well as to study the effect of different genotypes on serum lysozyme activity and somatic cell count. A total of 280 animals comprising four different famous bubaline breeds (Murrah, Mehsana, Surti and Bhadawari), spread over six different farms across the country were used for this study. A 276 bp (partial intron 2, complete exon 3 and partial intron 3) fragment of lysozyme gene was screened for polymorphism using the SSCP technique. Four genotypes namely AA, AB, BC and AC were observed, out of which BC genotype was found to be the most frequent. Among these three alleles, C allele (0.38) was most prevalent in these populations. Various SSCP allelic variants were cloned for sequencing and sequences were submitted to NCBI Genbank. From the alignment of the nucleotide sequences of various allelic variants, it was found that there were differences in 12 positions among the alleles, out of which maximum variation (at 8 places) was found in the intronic region. The allele A was closer to allele-C than allele-B. Allele B was phylogenetically equidistant from both of the other alleles. Mean lysozyme activity determined in serum samples of different animals of Murrah buffalo was $27.35{\pm}2.42\;{\mu}g$ per ml of serum, whereas the mean somatic cell count was $1.25{\pm}0.13{\times}10^5$ cells per ml of milk. The SSCP pattern-wise effects of various genotypes on lysozyme activity and SCC were analyzed. Although the mean values were apparently different in various genotypes, these differences were statistically non-significant. It can be concluded that the riverine buffaloes are sufficiently polymorphic with respect to serum lysozyme gene. The absence of AA genotype in Bhadawari breed of buffalo can be considered as a marker for breed characterization. The difference of four nucleotides in exon-3 indicates high selection pressure on the gene.

• Microbiology and Biotechnology Letters
• /
• v.10 no.4
• /
• pp.267-273
• /
• 1982

Among 12 kinds of ginsenosides in ginseng saponin, ginsenoside-Rb$_1$was contained the most abundantly. But ginsenoside-Rd which is similar to ginsenoside-Rb$_1$in structure, was known to be superior to ginsenoside-Rb$_1$pharmaceutically. In order to convert ginsenoside-Rb$_1$into ginsenoside-Rd by microbial enzyme treatment, a Rhizopus sp. was selected among various strais of molds found in rotten ginseng roots. Enzyme was prepared from the extract of wheat bran koji culture by ammonium sulfate precipitation (1.0 sat'd) and succeeding ammonium sulfate fractionation method (0.6-0.9 sat'd). For the purpose of use as substrate, saponins were purified by the several purification steps from alcohol extract of red ginseng roots. We obtained the total saponin which was composed of 36.5% of ginsenoside Rb$_1$, 12.2% of ginsenoside-Rd and other ginsenosides. For increase of ginsenoside-Rb$_1$ component ratio, we also obtained further purified ginsenoside-Rb group saponin containing 54.5% of ginsenoside-Rb$_1$, 1.1% of ginsenoside- Rd and other ginsenosides from purified the total saponin. In the enzymatic reaction system including the total saponin or the ginsenoside-Rb group saponin, we confirmed the specific conversion of ginsenoside-Rb$_1$to ginsenoside-Rd proportionally and no change of any other ginsenoside patterns by thin layer chromatography and high performance liquid chromatography.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.7
• /
• pp.391-402
• /
• 2017

Particulate matter becomes an important issue in the environmental society recently so that it is necessary to evaluate that the commercial application of baghouse systems for effective control of fine particulates is viable. A laboratory-scale baghouse experimental apparatus with filter bags made of PTFE felt or PTFE felt coated with PTFE membrane is used to investigate the filtration performances of fine particulates. Experiments by changing filtration velocity, inlet dust concentration, and average dust particle size show that the dust collection efficiency becomes higher at lower filtration velocity, higher inlet dust concentration and larger average dust particle size. The total pressure drop through the filter media and dust layer becomes higher at higher filtration velocity and higher inlet dust concentration. The dust collection efficiency is higher and the pressure drop is lower at a baghouse with filter bags coated with PTFE membrane than that without membrane coating. From the result that the dust collection efficiency of $PM_{2.5}$ in a reasonable filtration velocity range during off-line pulsing at a baghouse with PTFE felt bag filters coated with PTFE membrane is as high as 99.99%, it is confirmed that the use of baghouse is an effective measure to control the fine particulates.

• Analytical Science and Technology
• /
• v.26 no.1
• /
• pp.99-105
• /
• 2013

To identify oxidative hair dyes in hair-coloring products, the thin-layer chromatography (TLC) screening method was used in accordance with Korean Quasi-drug Codex. However, the TLC method is not reliable when there are very small amount of materials to be tested or when $R_f$ values of several components are similar. In this study, Ultra Performance Liquid Chromatography (UPLC) with a rapid sample preparation method was developed for the reliable and sensitive identification of active components contained in oxidative hair-coloring products. Hexane-distilled water was used for the extraction of active components contained in the products prior to UPLC analysis. The limit of detection of active components was 6.7-77.9 ${\mu}g/L$, and the limit of quantitation was 22.3-259.7 ${\mu}g/L$. Except for ${\alpha}$-naphthol, the range of recovery ratio was 96.2-101.5%. From this study, we demonstrated that oxidative active hair-coloring components can easily be analyzed by rapid extraction method followed by UPLC analysis.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.595-605
• /
• 2018

In recent years, researches on organic-inorganic coating films have conducted a nanocomposite system composed of organic resin matrices having excellent flexibility and chemical stability and inorganic materials having excellent mechanical properties. The o-phenylphenoxyethyl acrylate (OPPEA) used as the acrylate monomer has a high refractive index of 1.58, and the bisphenol A ethoxylate diacrylate (BAEDA) has a low refractive index but improves the chemical stability of the organic resin. In addition, zirconia used as an inorganic material exhibits excellent durability and optical properties. In this study, the BAEDA contents in acrylate monomer were controlled to produce a film with suitable optical transparency. And optimum conditions were established by comparing the changes in surface properties of PET films detected with pencil hardness tester, Abbe's refractometer, and UV-vis spectrophotometer. The hydrophobicity and the dispersibility of zirconia in acrylate monomer were much improved after modification with ${\gamma}$-methacryloxypropyltrimethoxysilane (MPS), which is a silane coupling agent. And the existence of ester C=O bond peak at $1716cm^{-1}$ introduced by MPS through FT-IR ATR spectrophotometer confirmed the completion of surface modification of zirconia with MPS. In addition, the presence of silicon atom on the surface modified zirconia was also proved using X-ray fluorescence spectrometer. When the photocurable hybrid coating was prepared by introducing chemically modified zirconia into acrylate monomer, the refractive index of this coated PET film was improved by 1.2%, compared to the only acrylate coated PET film. The homogeneous distribution of zirconia in acrylate coating layer on PET film was also identified through SEM/EDS mapping analysis technique.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.71-76
• /
• 2017

The roll damping problem in the design of ships and offshore structures remains a challenge to many researchers due to the fluid viscosity and nonlinearity of the phenomenon itself. In this paper, the study on viscous roll damping of a circular cylinder was carried out using forced oscillations. The roll moment generated by forced oscillation using a torque sensor was measured for each forced oscillation period and compared with the empirical formula. Although the magnitude of the measured torque from the shear force was relatively small, the results were qualitatively similar to those obtained from the empirical formula, and showed good agreement with the quantitative results in some oscillation periods. In addition, the flow around the circular cylinder wall was observed closely through the PIV measurements. Owing to the fluid viscosity, a boundary layer was formed near the wall of the circular cylinder, and a minute wave was generated by periodical forced oscillations at the free surface through the PIV measurement. In this study, the suitability of the empirical formula for the roll moment caused by viscous roll damping was verified by model tests. The wave making phenomenon due to the fluid viscosity around the wall of a circular cylinder was testified by PIV measurements.

• Journal of Conservation Science
• /
• v.33 no.2
• /
• pp.107-120
• /
• 2017

This research involves a gilding experiment using plum acid that has previously been reported to restore Geumdongsamjonpanbul excavated from Wolji, Gyeongju. Chromaticity analysis revealed that the yellowness of the samples was high, and the samples treated with acid for more than 10 minutes showed high brightness. SEM studies revealed that the sample subjected to amalgam application and immediate heating was rarely gilded with gold. When the amalgam application time was longer than 36 h, the gold layer observed was uneven. Therefore, the optimum amalgam application time was 12-24 h. EDS analysis showed that mercury content was ~5 wt.% for samples with an acid treatment time of 20 min, lower than that in other samples. Gold gilding was successful for the sample with amalgam application time of 24 h and acid treatment time of 20 min. This sample showed the high-resolution XPS peak corresponding to Au and retains a little Hg compared with the other samples. In other words, experimental and analytical results using plum acid showed that gilding was successful when acid treatment time was 20 min and amalgam application time was 24 h. Based on these results, Geumdongsamjonpanbul excavated from Wolji, Gyeongju can be restored.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.157-176
• /
• 2015

This research describes render pass synthetic techniques required to use for the effectiveness of them in 3D animation synthetic technology. As the render pass is divided by property and synthesized after rendering, elaborate, rapid synthesis can be achieved. In particular, occlusion pass creates a screen as if it had a soft, light shading, expressing a sense of depth and boundary softness. It is converted into 2D image through a process of pass rendering of animation projects created in 3D space, then completed in synthetic software. Namely, 3D animation realizes the completeness of work originally planned through compositing, a synthetic process in the last half. To complete in-depth image, a scene manufactured in 3D software can be sent as a synthetic program by rendering the scene by layer and property. As recently the occlusion pass can express depth notwithstanding conducting GI rendering of 3D graphic outputs, it is an important synthetic map not omitted in the post-production process. Nonetheless, for the importance of it, currently the occlusion pass leaves much to be desired for research support and books summarizing and analyzing the characteristics of properties, and the principles and usages of them. Hence, this research was aimed to summarize the principles and usages of occlusion map, and analyze differences in the results of synthesis. Furthermore, it also summarized a process designating renderers and the map utilizing the properties, and synthetic software usages. For the future, it is hoped that effective and diverse latter expression techniques will be studied beyond the limitation of graphic expression based on trends diversifying technique development.

• The Korean Journal of Pesticide Science
• /
• v.2 no.2
• /
• pp.75-82
• /
• 1998

This study was conducted to find out the biochemical or metabolic resistance mechanism of brown planthopper (BPH) to carbofuran. Differences between resistant ($LD_{50};\;20.3{\mu}g/g$) and susceptible strains($LD_{50};\;0.3{\mu}g/g$) were shown. The amounts of carbofuran metabolite, benzofuranol, and the origin, not developed by Thin Layer Chromatography, were much more in the susceptible strain. But the mother compound, carbofuran, was much more in the resistant strain. The tendencies of metabolism one and three hours after treatment were similar in both strains except for the amounts of metabolites described above. From the study, it is supposed that hydrolytic enzyme, esterase, changes its role from cleaving the esteric bond of carbofuran to making conjugates with carbofuran. This seems to be the main resistance mechanism of BPH to carbofuran. Oxidase and transferase may play little or no role in resistance mechanism. Oxidative and transferring enzymes gave no effects on the metabolism of carbofuran in the resistant strain compared with the susceptible strain.

• The Journal of the Korea Contents Association
• /
• v.7 no.2
• /
• pp.246-254
• /
• 2007

As for comics and animation, the specific gravity came to become still larger in all the art fields together with the importance in various image media now which is useful and goes the time of the 21st century new media. Especially the demand of users to the vision culture which develops day by day, Sensitivity Engineering Department is trying to realize the necessity for a sensitivity design acutely together. The influence of the comics which have toxicity most also in Japanese culture in a geographical position like South Korea on it, and animation is the actual condition in the reason which has reached from youth universally to the layer for years, to be inquired systematic to a Korean comics language. This research was conducted as we thought sufficient study on various situations are required, and among them for the research of expressions of cartoons's characters, we've divided the expressions of characters that comes out in Japanese cartoons into categories of 'happiness, anger, sadness, pleasure' and 'fear, astonishment and dislike' and based on these categories, we've drawn out the minimum elements to express emotions in cartoon and prepared image-map by relating them with languages that express emotions of people and based on this, we've made a calculating tools on how our readers would recognize the expression languages. Samples of Japanese cartoons of which we've chosen for the purpose of drawing out the elements of expressions were limited to only published cartoons and we've made a foot steps for expression analysis of animation characters in the future.