• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.537-548
• /
• 2016

The objective of this study was to evaluate the antimicrobial activities of 9 kinds of medicinal plants against crown gall in grapevine. The medicinal plants extracted with several solvent systems were screened for in vitro antibacterial activity by the disc diffusion method. The ethanol and ethyl acetate extracts from magic lily flowers, tachys roots, asian plantain flowers and seeds, sweet wormwood leaves, stems and flowers, immature bitter melon fruits, cockscomb flowers, and peach tree resin showed in vitro antimicrobial activities against Rhizobium vitis with growth inhibition zones ranging from 10 to 27 mm in diameter. The minimum inhibitory concentration values of extracts against R.vitis ranged from 10,000 in Asian plantain flower and 50,000 fold diluted extracts in sweet wormwood flowers, stems, leaves, cockscomb leaves and immature bitter melon fruits. The active fractions of ethyl acetate and ethanol extracts from the medicinal plants were partially separated through silica gel column chromatography and thin layer chromatography (TLC). The active fractions were separated at Rf 0.36, 0.69, 0.75, 0.84, and 0.94 in sweet wormwood extracts, Rf 0.96 and 0.99 in cockscomb flower extracts, Rf 0.92 and 0.97 in cockscomb leaf extracts, and Rf 0.85 in immature bitter melon fruit extracts in TLC analysis developed with hexane:ethyl acetate (20:80, v/v) and methanol:chloroform (20:80, v/v). Among extracts from plants with in vitro antimicrobial activities, sweet wormwood, cockscomb leaves, and immature bitter melon fruits showed in vivo antimicrobial activities with inhibition activity of 100, 67, and 83.3%, respectively, in 'Kyoho' grapevine inoculated with R. vitis compared with the untreated control. These findings indicate that extracts of medicinal plants could be used as sustainable candidates to control crown gall disease caused by R. vitis in grapevines.

• Biomedical Science Letters
• /
• v.2 no.1
• /
• pp.1-12
• /
• 1996

Antigenic components reacting with IgE and IgG antibodies were localized in muscular layer of adult and of larva, sparganum. But the antigenic components inducing IgG were localized at tegument and parenchyma in addition to muscular layer in adult and sparganum. Also in sparganum, the surface of calcareous corpuscles of parenchyma showed immunoreactivity to IgG antibody. However antigenic components inducing IgE antibody were not localized in tegument and parenchyma, but in adult worm, we observed the immunopositive reaction at the lining of vitelline follicles in mature proglottis and on surface of egg shell within uterus of graved proglottis. By the method of immunogold-labelling, we observed the location of antigenic particles in tegument of sparganum. The density of antigenic particles inducing IgG was higher than that of antigen particles inducing IgE in syncytial tegument, tegument cells. A total of 43 and 36 protein bands were resolved from crude extracts of adult and sparganum, respectively, by SDS-PAGE. 34 bands from crude extracts of adult and larva were migrated to same positions. By EITB, 21 bands of 44 bands in adult were recognized with IgG antibody, and also 21 bands of 36 bands in sparganum. 13 bands of them were common antigenic components both in the adult worm and sparganum. Because 19 bands of 44 bands in adult worm were reacted with IgE antibody, they were IgE antigenic component. In sparganum, 13 bands were IgE antigenic components. 9 bands of them were common antigenic component inducing IgE antibody in both a-dult and sparganum. 3 bands of antigenic component recognized by IgE and IgG antibody were nonspecific antigen in both adult and sparganum of Spirometra erinacei.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.373-380
• /
• 1996

Prevention of thromboembolism is the most important task in the development of bioconpatible small caliber artificial vascular graft. In normal vessels, vascular endothelial cells maintain homeosatsis by secreting numerous factors. The aim of this study is to develope a method which Improves biocompatibility of small caliver polyurethane graft using endothelial cell culture technique, and ev luate the efTectiveness of extracelluar matrix for endothelization which was produced by cultured fibroblast. Methods ; Multiporous polyurethane tube of 3 mm diameter, 0.3 mm thickness was manufactured for vascular graft. Three mongrel dogs were intubated and internal jugular veins removed. Extracelluar matrix produced by cultured flbrobast which was obtained from dog's internal jugular vein were coated to the polyurethane graft. Then, endothelial cells extracted from Jugular vein were cultured and fixed on the extracelluar matrix layer of vascular graft. Endothelial cell coated vascular grafts were implanted to the carotid arteries of experimental dogs as interposed autograft. Implanted grafts were removed after 3 and 6 weeks. As a control, PTFE graft was interposed on carotid artery. These experiments demonstrated that extracelluar matrix produced by fibroblast can afford a base for endothelial cell linings of polyurethane graft. Although thrombosis were developed on autografted en othelial cell coated graft, 33% opening was noticed, and showed less adhesion to adjacent tissue layer. These findings suggest that fiboblast produced extracelluar matrix which can be used for edothelial cell lining vascular graft, and by improving the cultured endothelial cell function, there will be a new modality for reducing thrombosis on small vascular graft.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.4
• /
• pp.199-213
• /
• 2008

Saemangeum salt-water Lake has been created by the completion of the sea-dike in April 2006. To monitor the water qualities of the lake during the sea-dike construction, salinity, SS, nutrients(DIN, DIP, DISi), and chlorophyll-$\alpha$ was analyzed for the surface water from 1999 to 2007. Due to the dike construction, weaker tidal current and lesser resuspension of bottom sediment resulted in the marked decrease of the concentrations of SS in the lake water. Consequently the clearer lake water has provided better condition for primary production with deeper penetration of sunlight into the water column and sufficient nutrient content in the water. Finally the chlorophyll-$\alpha$ content became approximately double in the concentration after the dike construction. Highly stimulated algal production with the marked decrease of the concentrations of SS was decreased the concentration of DIP in the surface water. On the other hand the concentration of DIN and DISi in surface water was increased after dike construction due to the expansion of the freshwater and the supply from bottom layer. As a result, the lake revealed an extremely high NIP ratio and a DIP-limited ecosystem. The lake has been transformed from a typical coastal ecosystem to a brackish one. Since the dike completion, the lake has shown a similar change pattern to the Geum River estuary. Due to the salt-wedge intrusion of seawater, it is highly probable to expect the formation of low-oxygen zone at the bottom layer near the river-mouth area of the lake during the summer. Therefore we need a continuous sentinel monitoring of bottom water qualities in the near future.

• Microbiology and Biotechnology Letters
• /
• v.41 no.2
• /
• pp.221-227
• /
• 2013

The methane oxidation characteristics at the top and bottom layers in up-flow biofilters were investigated. Two biofilters were packed with perlite and tobermolite (biofilter A: respectively top and bottom; biofilter B: respectively bottom and top) and then compared. The methane oxidation rate was analyzed with the packed bed of the biofilter layers. The bacterial population in the biofilter was characterized using quantitative real-time PCR. For the methane oxidation rate of the biofilter A column, the perlite top part ($845.16{\pm}64.78{\mu}mol{\cdot}VS^{-1}{\cdot}h^{-1}$) gave a relatively higher value than the tobermolite bottom part ($381.85{\pm}42.00{\mu}mol{\cdot}VS^{-1}{\cdot}h^{-1}$). For the methane oxidation rate of the biofilter B column, the tobermolite top part ($601.25{\pm}37.78{\mu}mol{\cdot}VS^{-1}{\cdot}h^{-1}$) provided a relatively higher value than the perlite bottom part ($411.07{\pm}53.02{\mu}mol{\cdot}VS^{-1}{\cdot}h^{-1}$). The pmoA gene copy numbers, responsible for methanotrophs, in the top layer of biofilter A (1.27E+13 pmoA gene copy number/mg-VSS) was higher than in the bottom layer (3.33E+13 pmoA gene copy number/mg-VSS). However, the population of methanotrophs in biofilter B was not significantly different between the top and bottom layers. These results suggest that although the methane oxidation rates of perlite and tobermolite in the top parts of biofilter A and B were high, methanotroph populations were higher in the bottom parts of both biofilters, with a rapid decline in methane concentrations within the biofilters.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.4
• /
• pp.37-55
• /
• 2000

Two-dimensional numerical experiments and field surveys have been conducted to clarify some environmental variations in the flow and sedimentation in the adjacent seas after the construction of a tidal embankment. Velocities of flow and water levels in the bay decreased after the construction of the barrage. When the freshwater was instantly released into the bay, the conditions of flow were unaltered, with the exception of a minor variation in velocities and tidal levels around the sluices at the ebb flow. The computational results showed that freshwater released at the low water reached the outside of the bay and then returned to the inside with the tidal currents at the high water. The front sea regions of the embankment had a variety of sedimentary phases such as a clayish silt, a silty clay and a sandy clayish silt. However, a clayish silt was prevalent in the middle of the bay. On the other hand, the skewness, which reflects the behaviour of sediments, was $\{pm}0.1$ at the front regions of the embankment while it was more than ±0.3 in the middle of the bay. Analytical results of drilling samples acquired from the front of the sluice gates showed that the lower part of the sediments consists of very fine silty or clayish grains. The upper surface layer consisted of shellfish, such as oyster or barnacle with a thickness of 40～50 cm. Therefore, it seemed that the lower part of the sediments would have been one of intertidal zones prior to the embankment construction while the upper shellfish layer would have been debris of shellfish farms formed in the adjacent seas after the construction of the embankment. This shows the difference of sedimentary phases reflected the influence of a tidal embankment construction.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.59-66
• /
• 2004

This paper presents a novel fabrication process for a tapered hollow metallic microneedle array using backside exposure of SU-8, and analytic solutions of critical buckling of a tapered hollow microneedle. An SU-8 meta was formed on a Pyrex glass substrate and another SU-8 layer, which was spun on top of the SU-8 mesa, was exposed through the backside of the glass substrate. An array of SU-8 tapered pillar structures. with angles in the range of $3.1^{\circ}{\sim}5^{\circ}$ was formed on top of the SU-8 mesa. Conformal electrodeposition of metal was carried out followed by a mechanical polishing using a pianarizing polymeric layer. All organic layers were then removed to create a metallic hollow microneedle array with a fluidic reservoir on the backside. Both $200{\mu}m\;and\;400{\mu}m$ tall, 10 by 10 arrays of metallic microneedles with inner diameters of the tip in the range of $33.6{\sim}101\;{\mu}m$ and wall thickness of $10{\mu}m\;-\;20{\mu}m$ were fabricated. Analytic solutions of the critical buckling of arbitrary-angled truncated cone-shaped columns are also presented. It was found that a single $400{\mu}m$ tall hollow cylindrical microneedle made of electroplated nickel with a wall thickness of $20{\mu}m$, a tapered angle of $3.08^{\circ}$ and a tip inner diameter of $33.6{\mu}m$ has a critical buckling force of 1.8 N. This analytic solution can be used for square or rectangular cross-sectioned column structures with proper modifications.

• Journal of Veterinary Clinics
• /
• v.29 no.4
• /
• pp.309-314
• /
• 2012

The study was undertaken to evaluate sensitivity and specificity of rapid Avian Influenza (AI) and Newcastle Disease virus (NDV) combo antigen kits from field samples of domestic (broiler and layer chicken, native chicken) and semi-domestic (duck, goose, pigeon and quail) birds of Bangladesh. Samples were collected from naturally infected AI suspected domestic and semi-domestic birds of five different outbreak areas in Bangladesh. From each area two birds were selected for sampling, and from each bird three types of samples (tracheal, cloacal and oro-nasal swabs) were collected. A total of 210 field samples from a total of 70 birds were collected and tested using AI and NDV combo antigen rapid diagnostic kits in the study. All three different samples from a bird showed similar pattern of reaction. Out of 210 samples, 15 samples (5 birds), 63 samples (21 birds) and 27 samples (9 birds) were positive for AIV, NDV and both for AIV and NDV, respectively; whereas the remaining birds were negative for either AIV or NDV in this screening test. Among the five AIV positive, a layer chicken from wet market in Mymensingh, Netrokona, Gibandha and Kurigram and a native chicken from wet market in Kurigram area was positive to AIV. The semi-domestic birds are either positive to NDV or free from both AIV and NDV. This study revealed that the AIV and NDV rapid diagnostic kits could be effectively use to diagnose the respective virus in trachea, oro-nasal and cloacal samples simultaneously. AIV-NDV combo Ag test result clearly indicates that the test kit designed for AIV and NDV could diagnose the disease rapidly with less effort and higher scientific know how which could be used for the detection of AIV and NDV using field samples in large scale.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.161-172
• /
• 2012

The purpose of this study is to classify, evaluate and grade the existing highway tunnels to increase landscape and natural statistics keeping the structural safety about tunnel gates area and induce the ones that will be constructed in the future by drawing the improvements and restoring the techniques as an environment-friendly. To examine the types of tunnel gate area, total 54 tunnels were investigated by selecting Gyeongbu Expressway, Yeongdong Expressway, and Jungang Expressway. Tunnel entrances and exit ports were classified as a Wall-closed type and Protruding type, which is based on tunnel gate type. Vegetation Landscape types were classified as Multilayer-Same as the surrounding landscape_(MS), Multilayer-Difference of surrounding landscape_(MD), Single layer-Same as the surrounding landscape_(SS), Single layer-Difference of surrounding landscape_(SD), and a Desolate type which based on vegetation layers and environment-friendly. Potential vegetation recovery was identified based on the structural stability and revegetation potential of the tunnel. The factors include the structural stability of the slope height and slope gradient were selected. Revegetation potential was identified as a growth potential. This factor was used in the step to classify vegetation recovery potential of a tunnel. The result, which investigated the types of tunnel entrances and exit parts has found that the most typical in 33 places was a Wall closed type with 61.1% of the total ones. The case of vegetation landscape types was created but different from the ones surrounding it with 85.2% of the total ones. It is judged that the currently constructed vegetation of tunnel entrance and exit parts had put convenience on the safety and management before landscape consideration. In addition, tunnel entrance and exit parts with excellent potential for vegetation recovery were all Protruding type. In addition, it is judged that slope stability can easily obtain growth. Therefore, entrance and exist of the highway tunnels, which will be constructed in the future, should reflect location and the result of the natural and ecological survey in design by performing it in advance and their types, which minimize the damage area range, should be applied to the local characteristics suitably. In addition, the ecologically healthy tunnel construction should be done by introducing active vegetation recovery techniques based on its safety.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.2
• /
• pp.95-103
• /
• 2002

The object of this study was to interpret the ralationship between expandability (% $S_{XRD}$), MacEwan crystallite thickness ( $N_{CSD}$), and mean fundamental particle thickness ( $N_{F}$ ) in illite-semctite mixed layer (I-S), quantitatively. This interpretation was extracted from comparison of two structural models (MacEwan crystallite model and fundamental particle model) of I-S mixed layers. In I-S structure, % $S_{XRD}$, $N_{CSD}$, and $N_{F}$ are not independent parameters but are related to each others by particular geometric relations. % $S_{XRD}$ is dependent on $N_{CSD}$ by short-stack effect, whereas, % $S_{XRD}$ and $N_{F}$ have relation to smectite interlayer number (Ns)=( $N_{F-}$1)/(100%/% $S_{XRD-}$ $N_{F}$ . Therefore, % $S_{XRD}$ and $N_{F}$ should satisfy a specific physical condition, 1< $N_{F}$ <100%/% $S_{XRD}$, because $N_{s}$ is positive. Based on this condition, this study suggested % $S_{XRD}$ vs $N_{F}$ diagram which can be used to interpret % $S_{XRD}$, $N_{F}$ , $N_{S}$ , and ordering, quantitatively. The diagram was examined by XRD data for I-S samples from Ceumseongsan volcanic complex, Korea. I-S samples showed that $N_{F}$ departs from the physical upper-limit ( $N_{F}$ =100%/% $S_{XRD}$) with decrease in % $S_{XRD}$. This phenomenon may happen due to decrease of stacking-capability of fundamental particles with their thickening.g.s with their thickening.g.