• Journal of the Korean Vacuum Society
• /
• v.22 no.4
• /
• pp.188-192
• /
• 2013

Many studies have been conducted for preventing from diffusion between silicon wafer and metallic thin film due to a decrease of line-width and multi-layer thin film for miniaturization and high integration of semiconductor. This paper has focused on the nano-mechanical property of diffusion barrier which sample is prepared for various gas flow rate of nitrogen with tungsten (W) base from 2.5 to 10 sccm. The deposition rate, resistivity and crystallographic properties were measured by a ${\beta}$-ray back-scattering spectroscopy, 4-point probe and x-ray diffraction (XRD), respectively. We also has investigated the nano-mechanical property using the nano-indenter. As a result, the surface hardness of W-N thin film was increased rapidly from 10.07 to 15.55 GPa when the nitrogen gas flow was increased from 2.5 to 5 sccm. And the surface hardness of W-N thin film had 12.65 and 12.77 GPa at the nitrogen gas flow of 7.5 and 10 sccm respectively. These results were decreased by the comparison with the W-N thin film at nitrogen gas flow of 5 sccm. It was inferred that these severe changes were caused by the stoichiometric difference between the crystalline and amorphous state in W-N thin film. In addition, these results were caused by increased compressive stress.

• Korean Journal of Microbiology
• /
• v.33 no.4
• /
• pp.257-261
• /
• 1997

To scrutinize the bacterial community composition of Lake Soyang in winter, bacterial numbers belonging to Eubacteria, Proteobacteria and Cytophaga-Flavobacterium group were estimated by using 16S and 23S rRNA targeted oligonucleotide probes. Total bacterial numbers ranged from $0.7{\times}10^6$ to $1.1{\times}10^6cells{\cdot}ml^{-1}$, and vertical profile of total bacteria showed a peak at 5 m depth. The ratio of eubacteria to total bacteria were 34~90% and at 5 m and 10 m depths those were low exhibiting, 39 and 34%, respectively. The percentage of proteobacteria ${\alpha}$-group ranged 10.8~28.7%, ${\beta}$-group 4.5~53.5%, ${\gamma}$-group 4.9~35.5% and Cytophaga-Flavobacterium group 6.1~21.1%. The dominant groups were ${\beta}$-group at 0, 2 and 5 m, ${\gamma}$-group at 10 m, ${\alpha}$-group at 30 m and Cytophaga-Flavobacterium group at 50 m depth. In winter season, Lake Soyang can be divided into three layer, 0~2 m, 5~10 m and 30~50 m, by the bacteria community composition. By this method, new informations about aquatic ecosystem were developed.

• Korean Journal of Acupuncture
• /
• v.22 no.1
• /
• pp.67-74
• /
• 2005

Objectives : This study was carried to identify the component of the Pericardium Meridian Muscle in human. Methods : The regional muscle group was divided into outer, middle, and inner layer. The inner part of body surface were opened widely to demonstrate muscles, nerve, blood vessels and to expose the inner structure of the Pericardium Meridian Muscle in the order of layers. Results We obtained the results as follows; He Perfcardium Meridian Muscle composed of the muscles, nerves and blood vessels. In human anatomy, it is present the difference between terms (that is, nerves or blood vessels which control the muscle of the Pericardium Meridian Muscle and those which pass near by the Pericardium Meridian Muscle). The inner composition of the Pericardium Meridian Muscle in human is as follows ; 1) Muscle P-1 : pectoralis major and minor muscles, intercostalis muscle(m.) P-2 : space between biceps brachialis m. heads. P-3 : tendon of biceps brachialis and brachialis m. P-4 : space between flexor carpi radialis m. and palmaris longus m. tendon(tend.), flexor digitorum superficialis m., flexor digitorum profundus m. P-5 : space between flexor carpi radialis m. tend. and palmaris longus m. tend., flexor digitorum superficialis m., flexor digitorum profundus m. tend. P-6 : space between flexor carpi radialis m. tend. and palmaris longus m. tend., flexor digitorum profundus m. tend., pronator quadratus m. H-7 : palmar carpal ligament, flexor retinaculum, radiad of flexor digitorum superficialis m. tend., ulnad of flexor pollicis longus tend. radiad of flexor digitorum profundus m. tend. H-8 : palmar carpal ligament, space between flexor digitorum superficialis m. tends., adductor follicis n., palmar interosseous m. H-9 : radiad of extensor tend. insertion. 2) Blood vessel P-1 : lateral cutaneous branch of 4th. intercostal artery, pectoral br. of Ihoracoacrornial art., 4th. intercostal artery(art) P-3 : intermediate basilic vein(v.), brachial art. P4 : intermediate antebrachial v., anterior interosseous art. P-5 : intermediate antebrarhial v., anterior interosseous art. P-6 : intermediate antebrachial v., anterior interosseous art. P-7 : intermediate antebrachial v., palmar carpal br. of radial art., anterior interosseous art. P-8 : superficial palmar arterial arch, palmar metacarpal art. P-9 : dorsal br. of palmar digital art. 3) Nerve P-1 : lateral cutaneous branch of 4th. intercostal nerve, medial pectoral nerve, 4th. intercostal nerve(n.) P-2 : lateral antebrachial cutaneous n. P-3 : medial antebrachial cutaneous n., median n. musrulocutaneous n. P-4 : medial antebrachial cutaneous n., anterior interosseous n. median n. P-5 : median n., anterior interosseous n. P-6 : median n., anterior interosseous n. P-7 : palmar br. of median n., median n., anterior interosseous n. P-8 : palmar br. of median n., palmar digital br. of median n., br. of median n., deep br. of ulnar n. P-9 : dorsal br. of palmar digital branch of median n. Conclusions : This study shows some differences from already established study on meridian Muscle.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.189-196
• /
• 2005

Recently as map making skills developed and as digital maps prevailed, peoples began to take interest in the realistic 3dimension topography rather than the flat 2 dimension one. The experiment is done by using the topographical information from the digital maps, To analyze the preciseness of this 3dimension topography, analysis of the coordinate-changed standard map image and the location errors of the plane and height from digital values of the map's topography by layers and features, were done. The visual results of locational values differed by every programs of coordinate transformation. Errors of locations also appeared from the methods of correcting the visual sources, when deciding the standard source's datum point. The plan's accuracy of the image data coordinate transformation is about ${\pm}4.1m$. In ground distance, therefore, it is included in the allowed error of the 1:25,000 scale changed map, satisfying the plan's accuracy. Also, by the use of reasonably spaced grid, it satisfied the visual topographical accuracy. Because the 3 dimension topographical map can be produced effectively and rapidly by using various scale's standard map image and the digital map, the further practical use of 3 dimension topographic map made by using the existing topographies and changed maps has high expectations.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.954-961
• /
• 2017

We investigated the purifications of PE-gal and CPN-gal, synthesized by transgalactosylation reaction using recombinant ${\beta}$-gal. The reaction mixture containing PE and PE-gal was first mixed with EA, and thereafter PE and PE-gal were distributed in two-phase (EA/water) system. In this system, PE and PE-gal was selectively moved into EA and water phase, respectively. Then, the water phase was collected, and silica gel chromatography was carried out using the collected water phase. Finally, we compared two purified PE-gal samples using HPLC and TLC analysis, in which the one was purified only by silica gel chromatography and the other was purified by EA extraction followed by silica gel chromatography. In the latter case, the residual PE was almost completely removed, whereas, in the former case, the residual PE was remained remarkably. Additionally, the purification yield of PE-gal was about 21% on the basis of mole. In the same purification protocol, CPN-gal was able to be purified using EA extraction followed by silica gel chromatography, in which the residual CPN was almost removed when CPN-gal was purified by EA extraction followed by silica gel chromatography.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.387-394
• /
• 2019

In this study, in order to evaluate the damage and deterioration of the track components of sleeper floating track (STEDEF), the field samples(specimens) were taken from the serviced line over 20 years old, and the track components were visually inspected, and investigated by laboratory tests and finite element analysis. As a result of visual inspection, the damage of the rail pad and fastener was slight, but the rubber boot was worn and torn at the edges of bottom. The resilience pads were clearly examined for thickness reduction and fatigue hardening layer. As a result of spring stiffness test of rail pad and resilience pad, the deterioration of rail pad was insignificant, but the deterioration of resilience pad exceeded design standard value. Therefore resilience pad was directly affected by train passing tonnage. As a result of comparing the deterioration state of the field sample and the numerical analysis result, the stress and displacement concentration position of the finite element model and the damage position of the field sample were coincident.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.54-54
• /
• 2019

Color-fleshed potatoes 'Hong-young' and 'Ja-young' were developed by RDA, and it has reported that they have high content of anthocyanin. Additionally they show higher radical scavenging activity compared to white or yellow fleshed potatoes. So it will be expected that the consumption of color-fleshed potatoes gradually increase by pre-peeled potatoes and color potato chips. This study was conducted to enhance the utilization of the tuber of color-fleshed potatoes. At first, we isolated four compounds from the organic solvents soluble layer in ethanol extract of tuber, and their structures were characterized by spectroscopic methods and by comparing their data to those in the literature. Their structures were characterized to be caffeic acid (1), chlorogenic acid (2), gallic acid (3) and protocatechuic acid (4) for the first time reported from this source. These compounds were already reported ingredients but considered to exhibit a high physiological activity. The quantitative determination on the four compounds in tuber of color-fleshed [Hong-young (HY) & Ja-young (JY)] and white-fleshed [Superior (SP)] potatoes samples were measured using HPLC. The concentration of caffeic acid in each total fractionations of HY (184.4 g/g) and JY (435.1 g/g) were higher than in total fractionation of SP (31.1). The concentration of gallic acid in each total fractionations of HY (282.1 g/g) and JY (315.2 g/g) were higher than in total fractionation of SP (143.3 g/g). The concentration of chlorogenic acid contents appeared to be highest in total fractionation of SP (954.2 g/g). The concentration of protocatechuic acid in total fractionation of HY (120.3 g/g) was higher than in each total fractionationss of JY (74.4 g/g) and SP (102.7 g/g). Overall, color-fleshed potatoes had higher amount of physicochemical properties than 'Superior'. Therefore, color-fleshed potatoes are expected to be highly valuable items for the development and applications of a functional food. In addition, these results will provide fundamental information for improving sitological value, and breeding of new cultivar.

• Journal of Korea Port Economic Association
• /
• v.30 no.1
• /
• pp.159-173
• /
• 2014

This study is key competence port logistics companies analyze the priorities of evaluation factors. key competence index of NCS(National competency standard) was designed on the basis of the research model. The priorities of evaluation factors were analyzed using AHP method. The results of the analysis of 1 layer's key competence priorities are as follows: Interpersonal skills(0.217), communication skills(0.153), ability to develop problem(0.148), ability to understand the organization(0.103), and resource management skills(0.090), self-development ability and professional ethics(0.070), information skills(0.065), technical skills(0.049), numeracy skills(0.035).

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.461-468
• /
• 2006

Optical characteristics in polymer films of MEH-PPV/DFPP blends were for the first time investigated. DFPP (N, N'-diperfluorophenyl-3,4,9,10-perylenetetracarboxylic diimide) used here was a novel n-type polymer, which had good stability in air and solubility in common solvents. For a 1:9 DFPP:MEH-PPV blend, highly efficient quenching of photoluminescence (PL) was observed. In addition, the photocurrent responses of these MEH-PPV/DFPP photovoltaic cells were measured. When the light intensity was $50mW/cm^2$, short-circuit photocurrent densities were two times higher than those of single layer MEH-PPV devices.

• Korean journal of applied entomology
• /
• v.60 no.4
• /
• pp.479-487
• /
• 2021

This study investigated the life history of the plum sawfly Monocellicampa pruni Wei, 1998 through field observations and laboratory experiments. M. pruni is a univoltine, complete metamorphosis species with five instars at the larval stage. Adults emerge from the soil around mid-March when Japanese plum trees are in their flowering period. The adults deposit one (rarely two) egg(s) under the epidermis layer of the calyx. After hatching, the larva soon burrows into the fruitlet, consumes the endocarp and remains inside the fruit within its four-time moulting transitions before reaching full growth. At maturity (in May), the larva leaves the infested fruitlet through an exit hole and burrows into the soil at a depth of 2 - 11 cm for spinning its cocoon and hibernates until the next spring as the larval form. Under laboratory conditions (T = 20℃; RH = 40 - 60%), the male lived for a slightly shorter period than the female, 6.03 ± 0.40 and 7.55 ± 0.45 days, respectively. A female could produce 30.29 ± 4.50 eggs in her lifespan. In the field, the duration of the egg was approximately 10 - 11 days and that of the larva was approximately 31 - 34 days.