• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.51-56
• /
• 2008

The waveform inversion for isotropic media has ever been studied since the 1980s, but there has been few studies for anisotropic media. We present a seismic waveform inversion algorithm for 2-D heterogeneous transversely isotropic structures. A cell-based finite difference algorithm for anisotropic media in time domain is adopted. The steepest descent during the non-linear iterative inversion approach is obtained by backpropagating residual errors using a reverse time migration technique. For scaling the gradient of a misfit function, we use the pseudo Hessian matrix which is assumed to neglect the zero-lag auto-correlation terms of impulse responses in the approximate Hessian matrix of the Gauss-Newton method. We demonstrate the use of these waveform inversion algorithm by applying them to a two layer model and the anisotropic Marmousi model data. With numerical examples, we show that it's difficult to converge to the true model when we assumed that anisotropic media are isotropic. Therefore, it is expected that our waveform inversion algorithm for anisotropic media is adequate to interpret real seismic exploration data.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.105-113
• /
• 2009

The interpretation of observed waveform characteristics identified in refraction and wide-angle reflection data increases confidence in the crustal structure model obtained. When calculating traveltimes and raypaths, wavefront methods on a regular grid based on graph theory are robust even with complicated structures, but basically compute only first arrivals. In this paper, we develop new algorithms to compute traveltimes and raypaths not only for first arrivals, but also for fast and later reflection arrivals, later refraction arrivals, and converted waves between P and S, using the modified wavefront method based on slowness network nodes mapped on a multi-layer model. Using the new algorithm, we can interpret reflected arrivals, Pg-later arrivals, strong arrivals appearing behind Pn, triplicated Moho reflected arrivals (PmP) to obtain the shape of the Moho, and phases involving conversion between P and S. Using two models of an ocean-continent transition zone and an oceanic ridge or seamount, we show the usefulness of this algorithm, which is confirmed by synthetic seismograms using the 2D Finite Difference Method (2D-FDM). Characteristics of arrivals and raypaths of the two models differ from each other in that using only first-arrival traveltime data for crustal structure analysis involves risk of erroneous interpretation in the ocean-continent transition zone, or the region around a ridge or seamount.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.68.1-68.1
• /
• 2012

The best part of graphene is - charge-carriers in it are mass less particles which move in near relativistic speeds. Comparing to other materials, electrons in graphene travel much faster - at speeds of $10^8cm/s$. A graphene sheet is pure enough to ensure that electrons can travel a fair distance before colliding. Electronic devices few nanometers long that would be able to transmit charge at breath taking speeds for a fraction of power compared to present day CMOS transistors. Many researches try to check a possibility to make it a perfect replacement for silicon based devices. Graphene has shown high potential to be used as interconnects in the field of high frequency electrical devices. With all those advantages of graphene, we demonstrate characteristics of electrical and optical properties of graphene such as the effect of graphene geometry on the microwave properties using the measurements of S-parameter in range of 500 MHz - 40 GHz at room temperature condition. We confirm that impedance and resistance decrease with increasing the number of graphene layer and w/L ratio. This result shows proper geometry of graphene to be used as high frequency interconnects. This study also presents the optical properties of graphene oxide (GO), which were deposited in different substrate, or influenced by oxygen plasma, were confirmed using different characterization techniques. 4-6 layers of the polycrystalline GO layers, which were confirmed by High resolution transmission electron microscopy (HRTEM) and electron diffraction analysis, were shown short range order of crystallization by the substrate as well as interlayer effect with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups on its layers. X-ray photoelectron Spectroscopy (XPS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation, and Fourier Transform Infrared spectroscopy (FTIR) and XPS analysis shows the changes in oxygen functional groups with nature of substrate. Moreover, the photoluminescent (PL) peak emission wavelength varies with substrate and the broad energy level distribution produces excitation dependent PL emission in a broad wavelength ranging from 400 to 650 nm. The structural and optical properties of oxygen plasma treated GO films for possible optoelectronic applications were also investigated using various characterization techniques. HRTEM and electron diffraction analysis confirmed that the oxygen plasma treatment results short range order crystallization in GO films with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups. In addition, Electron energy loss spectroscopy (EELS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation and XPS analysis shows that epoxy pairs convert to more stable C=O and O-C=O groups with oxygen plasma treatment. The broad energy level distribution resulting from the broad size distribution of the $sp^2$ clusters produces excitation dependent PL emission in a broad wavelength range from 400 to 650 nm. Our results suggest that substrate influenced, or oxygen treatment GO has higher potential for future optoelectronic devices by its various optical properties and visible PL emission.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.670-679
• /
• 1997

The pH changes in 4 small cavities prepared at the facial inner dentin and lingual outer dentin of the cervical and apical portion of root filled with calcium hydroxide pastes were investigated. Forty extracted permanent teeth with single canal were instrumented with step-back method, and then 4 small cavities were prepared. Two inner dentin cavities were cut a distance of about 1.0mm from the canal wall and two outer dentin cavities were cut to a depth of about 0.5mm from the root surface. Root canals and prepared cavities were flushed with 17% EDTA, and then irrigated with 5% NaOCl to remove smear layer. Teeth were randomly divided into four groups. Control group was not filled and the remaining other groups were filled with mixture of calcium hydroxide and distilled water, Vitapex$^{(R)}$ paste and Pulpdent$^{(R)}$ paste respectively. The pH change of the dentin in each cavity was measured at 0, 1, 3, 7, 14, 21, 28, 60, 90 days with pH microelectrode(WPI Co., USA). The results were as follows : 1. The groups obturated with Pulpdent$^{(R)}$ paste and Aqueous calcium hydroxide produced the increased pH level at 1 day and maintained plateau over next 3weeks and decreased after 3weeks. 2. The group obturated with Vitapex$^{(R)}$ paste observed no significant pH change until 2weeks and slight increased pH at 3weeks and sequential increasing after 3weeks. But, the pH in the group obturated with Vitapex$^{(R)}$ paste remained significantly below the pH measured in the other two experimental groups(P<0.05). 3. All experimental groups showed pH level similar to control group after 28 days. 4. The pH of outer dentin is slightly higher than that of inner dentin. There is no significant difference in pH level between apical and cervical dentin throughout the duration of the experiment, though apical dentin showed slightly higher pH than cervical dentin at 1 day(P<0.05).

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.405-412
• /
• 2001

Corrosion tests were carried out in $360^{\circ}C$ water and $360^{\circ}C$ 70ppm LiOH solution to investigate the corrosion behavior of new zirconium alloys (Zr-0.4Nb-0.8Sn-xFeCrMn, Zr-0.2Nb-1.1Sn-xFeCrMn, Zr-1.0Nb-xFeCu). Microstructures of tested alloys were analyzed by optical microscope and TEM. The cross-sectional surface and crystalline structure of the oxide layer were analyzed by SEM and XRD. From the results of corrosion test, all the alloys showed higher corrosion rates in $360^{\circ}C$ 70ppm LiOH aqueous solution thats in $360^{\circ}C$ water. Especially, high Nb-containing alloy exhibited the acceleration of corrosion rate in LiOH solution. The low Nb- and Sn-added alloys showed better corrosion resistance than the Sn- free high Nb alloy. from the effect of final annealing on the corrosion, it was observed that the partially recrystallized alloys showed better corrosion resistance than fully recrystallized alloys. This would be related to the size and distribution of the second phase particles.

• Microbiology and Biotechnology Letters
• /
• v.3 no.2
• /
• pp.63-68
• /
• 1975

A biological active substance was isolated from the cultured medium of Streptomyces sp. and its biochemical characteristics were investigated. Isolation process of the substance was as follows; the pH of filterate of the cultured medium was adjusted to 3.0 with N-hydrochloric acid and saturated with sodium chloride, then chloroform was added to this filterate in one fifth portions and stirred vigorously. After extracting the active substance with chloroform in 3 stages, the chloroform layer combined and evaporatea after dehydrating with sodium sulfate. The substance was found to be to be toxic to various fresh water fishes; the lethal dose for an average size Pseudorasbora parva T. et. S. was 50ug per ml. In the acidic condition, the toxicity of the substance remained fora long time, while in the alkaline state, the toxicity was decreased very fast. This substance was found to be stable to organic solvents, but labile to heat treatment. The maximal revival time of Pseudorasbora parva T. et. S. was about 20 minutes in 25 ug/ml of the substance solution.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.494-500
• /
• 2006

Life Cycle Assessment(LCA) is an environmental assessment tool for evaluating environmental burdens associated with products, processes and activities from the raw material acquisition stage to the end-of-life stage. End-of-life stage as well as other processes requires a reliant database in order to increase the confidence in the LCA results. In this study, the flow of Personal Computer(as PC) in the end-of-life stage was examined and the database of two scenarios has been established, i.e. one is part reuse and the other is no part reuse, in the end-of-life phase of PC. Also, key environmental issues were identified by carrying out LCA on a PC in the end-of-life phase for eight environmental impact categories. The 'ozone layer depletion' contributes the highest environmental impact due to generation of $Cl_2$ gas during the incineration of waste plastics. In addition, the scenario 1(part reuse) is more environmentally sound than the scenario 2(no part reuse) when comparing two scenarios.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.245-253
• /
• 2001

To investigate the effects of hydromechanical and textural characteristics of sediment deposits on the cultivation of Manila clam, Ruditapes philippinarum surface and sub-surface core sediments were collected seasonally in Gomso tidal flat. Grain size distribution were analyzed to investigate the annual variation of sediment texture. In winter unimodal distribution of grain size with the peak at $5\phi$ is dominant However, during the summer sediment texture become a little bit coarser and grain size distribution shows the peaks at $4\~5 \phi$. Optimum sediment texture for the cultivation of manila clam, R. philippinarum was found to be sandy silt in which mean Brain size was between 4 and $5 \phi$ with the sand content less than $50\%$ and clay content of $5\~10\%$. Mechanical and hydrological characteristics of sediment deposits were also studied in the laboratory and the results were applied to the numerical simulation for the behavior of surface sediment subjected to the cyclic loading from sea-water level change. Results of numerical simulation illustrate that the permeability of sediment had to be maintained in the range of $10^{-11}\sim10^{-12}m^2$ to ensure the proper sedimentological environment for the cultivation of manila clam, R. philippinarum. The deposits of virtually impermeable mud layer, with the threshold thickness of 4 cm, would be very hazardous to clam habitat.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.2
• /
• pp.155-161
• /
• 2002

Tetraselmis suecica (T. suecica) of Prasinophyta was selected because the growth rate is comparatively higher and the culturing is also easy. In order to investigate antioxidative activity, the soluble elements of T. suecica were fractionated using water and organic solvents such as methanol, hexane, chloroform, ethylacetate and butanol. The chloroform fraction of T. suecica showed strong antioxidative activity. The potential antioxidative activity was detected in hexane: ethylacetate (1:5) once used the fractions by different mixtures of organic solvents. This fraction was further purified by preparative thin layer chromatography (PTLC) and repeated reverse-phase HPLC. On the basis of chemical and spectroscopic evidences obtained by UV, FT-IR, FAB-MS and NMR, the compound purified from T. suecica was identified as pheophorbide-a. The antioxidative activity of the compound was comparable to that of $\alpha$-tocopherol and could be act as an antioxidant in foods.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.13 no.3
• /
• pp.95-101
• /
• 1980

Optical properties were studied at the fishing ground of anchovy in the southern part of Korea based on seven oceanographic stations from May to August and November to December, 1977. Submarine daylight intensity was measured at intervals of 1m depth in the upper 30 m layer by the underwater luxmeter (Toshiba # 9). The absorption coefficient of the sea water ranged from 0.066 to 0.619 (mean 0.21) for six months. The transparency ranged from 2.6 to 16 meters (mean 8.4m). The relationship between absorption coefficient (n) and transparency (D) was k=1.70/D. The mean water color in this area was 4.8 $(3\~10)$ in Forel scales. The rates of light penetration for daylight at four different depths were computed with reference to the surface light intensity. The mean rates of light penetration were $69.38\%(25.43\~88.10\%),\;30.35\%\;(4.38\~59.46\%),\;12.53\%\;(0.75\~33.51\%),\;5.7\%(0.18\~20.27\%)$ at depths of 1, 5, 10 and 15 m respectively.