• Korean Journal of Veterinary Research
• /
• v.37 no.3
• /
• pp.569-576
• /
• 1997

Fowl typhoid(FT) caused by Salmonella gallinarum is an infectious, egg-transmitted disease and characterized by swollen bronze liver, greenish-yellow diarrhea and high mortality in growing and adult chickens. Since 1992 the outbreak of FT has been increased. Several problems have been occurred such as absence of appropriate vaccines and lack of useful therapeutic methods. In these studies we investigated the pathogenicity of S gallinarum isolated in chickens. To compare the pathogenicity among the species of chickens, all chickens were challenged intramuscularly or orally with $1{\times}10^7$ CFU of S gallinarum. The brown-colored layers were more susceptible and white leghone chickens were more resistant than other species. In the brown layer chickens orally challenged, lethal doses ($LD_{50}$) of the isolates were inoculated at 1 day, 2 weeks, 4 weeks and 8 weeks old chickens with amount of $10^{4.2}$, $10^{4.7}$, $10^{7.0}$ and $10^{7.6}$ CFU, respectively. The chickens which were intramuscularly challenged with the less amount than $10^2$ CFU showed higher mortality than that of the chickens orally inoculated with same dose. Also, we investigated the recovery rates of bacteria from various organs of survival chickens which were challenged orally with $5{\times}l0^7$ CFU of S gallinarum. The bacteria was more frequently and isolated earlier from the liver and spleen than from any other ogans. In the pathogenicity test, the white-leghorn chickens which were known as resistant-strain against Salmonella were artificially immunosuppressed using bursectomy and/or dexamethasone treatment. Mortality of chickens with both bursectomized and treated with dexamethasone was higher(90%) than that of the control group(10%), the bursectomized chickens(10%) and the dexamethasone only treated group(20%). It was suggested that the protective mechanism in chickens against S gallinarum may be required both the functions of B-cells and T-cells.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.266-272
• /
• 1992

Azacrownoalkyl phenylphosphinic acids were synthesized and their competitive solvent extraction characteristics from water to chloroform layer were investigated. Phosphinic acids were synthesized in good yields by one step reaction of phenylphosphinate, aldehyde, and monoazacrown ether and then basic hydrolysis of the resulting phosphinate dsters. These complexing agents revealed a wide effective pH range in extraction of alkali metal ions from water to the organic phase and total metal ion loading at pH 11 was about 75%. The selectivity of the cation extraction was determined mainly by the cavity size of the azacrown ethers, showing $Na^+$ >> $K^+$ > $Rb^+$ > $Li^+$ > $Cs^+$ for the alkyl phenylphosphinic acid ${\underline{2}}$, containing monoaza-15-crown-5 and $K^+$ >> $Rb^+$ > $Na^+$ > $Cs^+$ > $Li^+$ for the alkyl phenylphosphinic acid, ${\underline{3}}$, containing monoaza-18-crown-6 moiety. Applicable pH range of these azacrown ether phosphinic acids in solvent extraction of alkali metal cations was wider than a crownether carboxylic acid with similar selectivity, showing considerable amount of metal ion loading in slightly acidic or neutral media.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.638-645
• /
• 2009

High alumina refractory used in a coal gasifier was analyzed and the degradation mechanism by molten slag was investigated. The depth of refractory severely damaged by slag varied between 12~40 mm, including the adhered slag layer. The sample also showed the cracks formed in parallel to the slag/refractory interface. The degree of degradation varied with the micro-structures in the refractory. Fused alumina grains showed the uneven boundary and pore formation just along the edges, while the tablet alumina showed the slag penetrated between sintered alumina around which the formation of Al-Fe phase was observed. Calcium aluminate cements were not observed at the high temperature zone near the slag/refractory interface, probably due to dissolution into molten slag. Around large grains of alumina, rod shape alumina, which appeared to be recrystallized during cooling, were observed, and large pores were also formed around those grains. Therefore, in high alumina refractories, hot molten slag dissolves the bonding phase and rod-shape alumina phase is recrystallized upon cooling. During this process, cracks are developed due to structural change, and the degradation occurs by physical causes such as structural spalling.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.150-160
• /
• 1994

Drift gillnet fishery for neon flying squid in the North pacific was one of the major pelagic fisheries of Korea until 1992, its annual catch was 79, 000M/T as average during 1988-1992, but moratoriumed since 1993 according to the decision of UN. Therefore, for the developing of the new fishing gear for the squid, the seven types of rip hook by automatic squid jigging machine were experimented by the korean research vessel Pusan 851 (G/T 1.126, 2.600 PS) in the North Pacific (38 $^{\circ}$30'-43 $^{\circ}$N, 152 $^{\circ}$E-178 $^{\circ}$W) from July 6. 1993 to August 31. 1993. The investigation on catch rate, dropout rate, and catch condition of the rip hooks related to the fishing lamp power for aggregating the squid were carried out during the period. The results obtained are as follows: The composition of catch by automatic squid jigging machine was 83.9% for neon flying squid. 15.5% for boreopacific gonate squid. 0.6% for boreal clubhook squid, and 0.01% for luminous flying squid. The catch rate of neon flying squid was 94.6% in 13.6-18.3$^{\circ}C$ of surface water temperature and 5.4% in others. The higher catch rate of neon flying squid was made in the range 13.6-18.3$^{\circ}C$ of temperature at the surface and about 1$0^{\circ}C$ of temperature at the 100m layer. The CPUE of neon flying squid in the 13.6-18.3$^{\circ}C$ of surface water temperature was ranged 0.8-11.8kg (8.7kg as average). The mantle length and body weight of neon flying squid caught in the experiment were ranged 18.3-51.3 cm, 140-3, 980g and mean mantle length and mean body weight were 29.4cm, 972g respectively. The catch rate of neon flying squid was the highest at dawn with a value of 25.0% of the total catch. The body weight of neon flying squid caught by the D type hooks was 1.7 times more than that of the A type hooks. The dropout rate of neon flying squid caught by the seven types hooks was 7.9-57.5% (19.0% as average), and dropout rate of the D type hooks was 7.9% with 2.7 times decrease than that of the A type hooks. The catch efficiency of small sized neon flying squid in case of using on-off switch method on fishing lamp in 15 minutes intervals was 2.6 times higher than that of the on-switch method with same fishing lamp power.

• Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.24-28
• /
• 2000

This study was conducted to evaluate the effect of ultrafiltration (UF) process variables on permeate flux and membrane resistance and to clarify apple vinegar for quality improvement. Apple vinegar was clarified in a laboratory ultrafiltration system with hollow fiber membrane made of polysulfone and MWCO 30,000 and 10,000. The permeate flux increased with the increase of flow rate and the optimum pressure was $1.5\;kgf/cm^2$ in this system. The turbidity of clarified apple vinegar treated UF largely decreased. pH and acidity of treated samples showed the same level as those of untreated apple vinegar. The permeate flux continuously declined while the fouling material accumulated on the membrane as the operation time increased. Resistance decreased with lower pressure, which could be explained by expansion of pore size at lower pressure and minor compaction of the polarized layer at lower pressure.

• Journal of Plant Biotechnology
• /
• v.40 no.3
• /
• pp.147-155
• /
• 2013

In this experiment, we report for the first time mass propagation by in vitro mircrotuberization of Codonopsis lanceolata. We first examined the effect of cytokinins on multiple shoot induction. 2.0 $mg{\cdot}L^{-1}$ of kinetin not only gave the highest rate of shoot induction (19.1%) but also the elongation of shoot (17.1 mm). Secondly, we investigated the effect of sugars on in vitro microtuberization from nodal segments. The diameter of tuberous roots was enlarged in the half-strength MS medium supplemented with 145.9 mM sucrose. Histological analysis revealed that the number of parenchymatous cell containing starch grains increased in the tuberous roots. In addition, unlike in non-tuberous root, vascular bundles were scattered inner cortex layer. Thirdly, in order to preserve and stimulate the germination, microtubers were stored at $4^{\circ}C$ refrigerator during 9 months and then transplanted to the artificial soils (vermiculrite : peatmoss = 1:1 v/v), resulting that the rates of survival and germination were 75% and 70%, respectively. These results indicated that mass propagation of C. lanceolata was achieved by in vitro microtuber formation, suggesting that this protocol might be applied for not only the propagation of elite clones but also conservation of C. lanceolata germplasm.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.463-469
• /
• 2015

In this study, to improve bending strength performance of Korean white pine, we made the curved composite glulam that was reinforced with glass fiber materials and larch lamina. Five types of Korean white pine curved glulams were made depending on whether they had been reinforced or not and how they had been reinforced. Type-A, reference specimen, was produced only with Korean white pine lamina, and Type-B was with larch lamina in the same thickness. Type-C was made by inserting a glass fiber cloth of textile shape between the each layer. Type-D was reinforced with two glass fiber cloths, which were placed inside and outside of the outermost lamina. Type-E was reinforced with GFRP sheet in the same way as Type-D. As a result of this bending strength test, the modulus of rupture (MOR) of Type-B, Type-C and Type-E were increased by 29%, 6%, and 48% in comparison with Type-A. However, MOR of Type-D was decreased by 2% in comparison with Type-A. In the failure modes, Type-A, Type-B and Type-C were totally fractured at the maximum load. However, load values of Type-D and Type-E decreased slowly because of reinforcement of fracture suppression, and the GFRP sheet (Type-E) had better reinforcing effect on compressive stress and tensile stress than the glass fiber cloth (Type-D).

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.3
• /
• pp.165-178
• /
• 2011

The potential of petroleum generation was investigated by clay mineralogical changes of illite-smectite on the sedimentary basins: Tertiary Pohang basin and Cretaceouls Gyeongsang basin on land, and offshore basins east and west of Korea. Only disordered illite-smectite mixed layer minerals occur in the Pohang sediment, where petroleum generation cannot be expected due to low temperatures below $100^{\circ}C$. By contrast, the Gyeongsang basin is characterized by the occurrence of illite and high temperatures above $200^{\circ}C$ which are obtained by illite crystallinity. The high temperatures indicate that the Gyeongsang sediment ha, already passed through the oil generation stage. The change of disordered illite-smectite to R-l ordered illite-smectite is shown in the sediment of the East Sea continental shelf area at a depth of 2,500 m. Therefore, the oil generation can be expected in the sediments below the depth of 2,500 m. The sequential change of disordered illite-smectie to R=3 ordered illite-smectite through R=l ordered illite-smectite occurs in the sediments of West Sea continental shelf area with burial depth which shows the favorable condition for oil and gas generation. The temperatures of sediments measured by illite-smectite indicate that hydrocarbon potential is very low in the onland basins but high in the continental shelf areas.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.157-169
• /
• 2010

This study focused on the material characteristics and archaeometric relationship between the molten glass and bronze materials within the crucibles and gilt-bronze Bodhisattva statue excavated from the Ssangbukri site in Buyeo, Korea. Yellowish green to red brown vitreous material in the crucibles was identified as lead glass which contained scarce amount of BaO, and low $Al_2O_3$ and CaO. Metallic molten material was identified as bronze of copper-tin-lead alloy with low amount of impurities that indicated well-refined materials. Also, cassiterite was used for raw metal ore of tin. The Bodhisattva statue consisted of major copper with trace impurities in the core metal, and gold amalgam in the gilded layer. Though lead isotopic analysis showed contradictory results in each lead glass, bronze and Bodhisattva statue that required further examination, it could be stated that the statue was made in the Ssangbukri site based on the high-level technical skills of bronze production.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.1
• /
• pp.80-87
• /
• 2001

Global robust diagnostic models are established based on MOM of GFDL to study the circulation in the world ocean. The horizontal grid sizes 1/2 degree, and the vertical water column is divided into 21 levels. The hydrographic data are taken from Levitus et al.(1994) and the wind stress from Hellerman and Rosenstein (1983). Based on the model results the horizontal volume, heat and salt transports across some representative sections are calculated. The preliminary results show that Though the cross-equator volume transports in the Atlantic, Indian and Pacific Oceans are all small, the heat transports across equator in the Atlantic are northward. This is clearly a result of the southward flow of the North Atlantic Deep Water and the northward compensating warm flow in the upper layer. The annual mean of the cross-equator heat transport in the Pacific Ocean from the present model is significantly lower than that calculated by Philander et at. (1987). This might indicate the importance of the Indonesian Throughflow in the heat transport in the Pacific Ocean. Our calculation shows that the heat transport through the Indonesian Archipelago is 0.5 PW, which is comparable with the poleward heat transport in the North Atlantic and Pacific Oceans. The difference in heat transports across the sections 5 and 6 demonstrates the important role of the Agulhas Current in the heat balance of the world ocean.