• Steel and Composite Structures
• /
• 제6권2호
• /
• pp.87-101
• /
• 2006

The deformation and dynamic behavior mechanism of submerged shell-like lattice structures with membranes are in principle of a non-conservative nature as circulatory system under hydrostatic pressure and disturbance forces of various types, existing in a marine environment. This paper deals with a characteristic analysis on quasi-periodic and chaotic behavior of a circular arch under follower forces with small disturbances. The stability region chart of the disturbed equilibrium in an excitation field was calculated numerically. Then, the periodic and chaotic behaviors of a circular arch were investigated by executing the time histories of motion, power spectrum, phase plane portraits and the Poincare section. According to the results of these studies, the state of a dynamic aspect scenario of a circular arch could be shifted from one of quasi-oscillatory motion to one of chaotic motion. Moreover, the correlation dimension of fractal dynamics was calculated corresponding to stochastic behaviors of a circular arch. This research indicates the possibility of making use of the correlation dimension as a stability index.

• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.681-701
• /
• 2014

The main aim of this study is to propose an efficient meta-heuristic algorithm for topology optimization of geometrically nonlinear single layer domes by serially integration of computational advantages of firefly algorithm (FA) and particle swarm optimization (PSO). During the optimization process, the optimum number of rings, the optimum height of crown and tubular section of the member groups are determined considering geometric nonlinear behaviour of the domes. In the proposed algorithm, termed as FA-PSO, in the first stage an optimization process is accomplished using FA to explore the design space then, in the second stage, a local search is performed using PSO around the best solution found by FA. The optimum designs obtained by the proposed algorithm are compared with those reported in the literature and it is demonstrated that the FA-PSO converges to better solutions spending less computational cost emphasizing on the efficiency of the proposed algorithm.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.40-46
• /
• 2014

Bonding technology and bonding mechanism of metal to ceramic including brazing, diffusion bonding, friction welding and etc were reviewed in this study. Various factors should be considered from a bonding design step to acquire a good bonding joint because of a large difference between metal and ceramic in crystal lattice, coefficient of thermal expansion and various properties. In addition, metal and ceramic bonding technologies are constantly being developed according to precise components, multi-function and application to harsh environment. However, improvement of bonding properties and bonding reliability also should be accompanied. Bonding of ceramics, such as $ZrO_2$, $Ti_3AlC_2$ and SiC, to metals like Ti-alloy, TiAl and steel were described in this paper.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.1045-1049
• /
• 1996

Pressureless-sintered polycrystalline alumina and carbon steel were joined with Ag-33.5Cu-1.5Ti (wt%) brazing alloy. SEM observation revealed that two reaction layers with different thicknesses were continuously formed between the alumina and the brazing alloy. A thick layer formed on the brazing alloy side was identified as Ti3(Cu0.93Al0.07)3O phase with diamond cubic structure. Another thin layer adjacent to the alumina was revealed as $\delta$-TiO phase of which the crystal structure was HCP with a lattice parameter of a0=0.419 nm and c0=0.284 nm. It was confirmed using XPS analysis that $\delta$-TiO was formed directly by a redox reaction of alumina with titanium ir, molten brazing alloy.

• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1391-1404
• /
• 2015

A radially retractable roof structure based on the concept of the hybrid grid shell is proposed in this paper. The single-layer steel trusses of the radially foldable bar structure are diagonally stiffened by cables, which leads to a single-layer lattice shell with triangular mesh. Then comparison between the static behavior between the retractable hybrid grid shell and the corresponding foldable bar shell with quadrangular mesh is discussed. Moreover, the effects of different structural parameters, such as the rise-to-span ratio, the bar cross section area and the pre-stress of the cables, on the structural behaviors are investigated. The results show that prestressed cables can strengthen the foldable bar shell with quadrangular mesh. Higher structural stiffness is anticipated by introducing cables into the hybrid system. When the rise-span ratio is equal to 0.2, where the joint displacement reaches the minimal value, the structure shape of the hyrbid grid shell approaches the reasonable arch axis. The increase of the section of steel bars contributes a lot to the integrity stiffness of the structure. Increasing cable sections would enhance the structure stiffness, but it contributes little to axial forces in structural members. And the level of cable prestress has slight influence on the joint displacements and member forces.

• 분석과학
• /
• 제12권1호
• /
• pp.40-46
• /
• 1999

Zn-Ni 도금강판의 도금층 구조 및 형상 변화에 미치는 도금 제조 조건중, 전류 밀도, $Ni^{2+}$ 이온 농도, $Cl^-$ 이온 농도 등의 영향에 대하여 고찰하였다. 먼저 도금 조건의 중요한 변수 중의 하나인 전류 밀도를 변화시켰을 때 전류 밀도가 감소함에 따라 도금층 중의 Ni 함량은 증가하였다. 또한 도금 용액 중의 $Cl^-$ 이온과 $Ni^{2+}$ 이온 농도가 증가하면 도금층의 Ni 함량이 증가하였다. 이러한 도금층 중의 Ni 함량은 도금층의 구조 변화와 밀접한 관계를 나타내었다. 즉, Ni 함량이 10 wt.% 미만인 경우에는 ${\eta}$상과 ${\gamma}$상의 혼합 구조를 가지는데 비해서 10 wt.% 이상이 되면 ${\gamma}$단일상으로 변환되었다. 그리고 ${\eta}$상의 구조에서 Ni 함량이 증가함에 따라 a축 방향의 격자 상수는 증가하고 c축 방향의 격자 상수는 감소하였다. 한편 도금층의 형상 변화는 도금층의 조성과 결정구조가 달라짐에 따라 판상의 결정립 형태에서 부터 작은 구상의 입자상에 이르기까지 다양한 변화를 나타내었다.

• 한국음향학회지
• /
• 제34권5호
• /
• pp.335-342
• /
• 2015

포노닉 크리스탈이란 기저물질 내에 주기적으로 배열된 산란체로 구성된 복합물질로서 포노닉 크리스탈에 입사된 음파가 특정 주파수 대역에서 차단되는 현상인 밴드 갭이라는 중요한 특성을 갖는다. 본 연구에서는 수중에서 산란체로서 1 mm의 직경을 갖는 원기둥 형태의 스테인리스 스틸 막대가 1.5 mm의 격자상수를 가지며 정방형으로 배열된 2차원 포노닉 크리스탈의 음향 밴드 구조를 이론 및 실험적으로 고찰하였다. 2차원 포노닉 크리스탈의 밴드 구조를 예측하기 위해 유한요소법을 이용하여 첫째 브릴루앙 영역의 ${\Gamma}X$ 방향에 대해 주파수와 파동벡터에 대한 분산관계를 계산하였다. 초음파가 입사되는 방향과 수직한 스테인리스 스틸 막대 층의 개수를 1, 3, 5, 7, 9개로 변화시켜가며 투과계수 및 반사계수를 측정하였다. 계산된 분산관계로부터 2 MHz 이하의 주파수 대역에서 5개의 밴드 갭이 존재하는 것으로 예측되었으며, 첫째 밴드 갭은 0.5 MHz를 중심으로 나타났다. 투과계수 및 반사계수로부터 실험적으로 확인된 밴드 갭은 분산관계로부터 예측된 밴드 갭과 잘 일치하는 것으로 나타났다.

• 한국표면공학회지
• /
• 제51권4호
• /
• pp.249-255
• /
• 2018

High temperature and low temperature gaseous nitriding was performed in order to study of the surface hardening and wear properties of the nitrided AISI 410 Martensitic stainless steels. High temperature gaseous nitiridng (HTGN) was carried out using partial pressure $N_2$ gas at $1,100^{\circ}C$ for 10 hour, and Low temperature gaseous nitiridng (LTGN) was conducted in a gas mixture of NH3 and N2 at $470^{\circ}C$ for 10 hour. The nitrided samples were characterized by microhardness measurements, optical microscopy and scanning electron microscopy. The phases were identified by X-ray diffraction and nitrogen concentration was analyzed by GD-OES. The HTGN specimen had a surface hardness of about $700HV_{0.1}$, $350{\mu}m$ of case depth. A ${\sim}50{\mu}m$ thick, $1,250HV_{0.1}$ hard nitrided case formed at the surface of the AISI 410 steel by LTGN, composed nitrogen supersaturated expanded martensite and ${\varepsilon}-Fe_{24}N_{10}$ iron nitrides. Additionally, the results of the wear tests, carried out LTGN specimen was low friction coefficient and high worn mass loss of ball. The increase in wear resistance can be mainly attributed to the increase in hardness and to the lattice distortion caused by higher nitrogen concentration.

• 한국재료학회지
• /
• 제26권10호
• /
• pp.535-541
• /
• 2016

The present study deals with the effects of micro-alloying elements such as Ni, V, and Ti on the recrystallization behavior of carbon steels at different strain rates. Eight steel specimens were fabricated by varying the chemical composition and reheating temperature; then, a high-temperature compressive deformation test was conducted in order to investigate the relationship of the microstructure and the recrystallization behavior. The specimens containing micro-alloying elements had smaller prior austenite grain sizes than those of the other specimens, presumably due to the pinning effect of the formation of carbonitrides and AlN precipitates at the austenite grain boundaries. The high-temperature compressive deformation test results indicate that dynamic recrystallization behavior was suppressed in the specimens with micro-alloying elements, particularly at increased strain rate, because of the pinning effect of precipitates, grain boundary dragging and lattice misfit effects of solute atoms, although the strength increased with increasing strain rate.

• 소성∙가공
• /
• 제25권6호
• /
• pp.359-365
• /
• 2016

The rate-controlling mechanisms for time-dependent plastic deformation of eutectoid and hyper-eutectoid pearlitic steels at low $T/T_m$ temperatures were explored. The strain rate - stress data obtained from a series of constant load tensile tests at $0.25{\sim}0.30T/T_m$ were applied to the power law, the lattice friction controlled plasticity, and the obstacle controlled plasticity. Of these models, the obstacle controlled plasticity was found to best-describe the rate-controlling mechanism for time-dependent plastic deformation of two steels at low $T/T_m$ temperatures in terms of the activation energy for overcoming the obstacles against dislocation glide in ferrite. The deformed microstructures revealed the dislocation forests of a high density as the main obstacles. In addition, the obstacle controlled plasticity well-explained the effects of cementite on the $0^{\circ}K$ flow stress of two steels.