• 제목/요약/키워드: lateral release

검색결과 92건 처리시간 0.021초

철봉 리발코(Rybalko) 동작의 운동학적 분석 (The Kinematic Analysis of the Rybalko Motion on the Horizontal Bar)

  • 이병원
    • 한국운동역학회지
    • /
    • 제16권1호
    • /
    • pp.109-117
    • /
    • 2006
  • The purpose of this study was done in order to investigate the Kinematical variables of the Rybalko motion on the Horizontal bar using the 3-dimensional cinematographic method. For this study, three excellent athletes take part in a 2003 Daegue universid game were chosen. The subject,s Rybalko motion was filmed with S-VHS camera at the speed of 60 fields per second and digitized the each fields. And the Kwon3D 3.1 version program was employed to obtain 3-dimensional data. As a result of this study. 1. A total time spent for performing Rybalko skill was Mean $2.52{\pm}0.13sec$. From starting down swing to releasing right hand the Mean $0.84{\pm}0.24sec$ was taken. 2. In the event 3 of Rybalko motion, that is, the moment which the right-hand is released on the bar, the center of mass must is employed at the position above the horizontal line of bar. In this research, the average vertical displacement(z axe) of center of mass shows $47.87{\pm}3.14cm$. 3. In the event 5, that is, the moment which the right-hand is catched again on the bar, the center of mass is employed at the position before the vertical line of bar. In this research, the average horizontal displacement(z axe) of center of mass shows $47.87{\pm}3.14cm$. 4. It has been seen that, at the moment of release of right-hand, lateral variation of center of mass is 13.395cm, vertical variation of center of mass is 7.41cm Thus, it is concluded that lateral variation of center of mass should be reduced for high grade to be acquired. 5. It has been founded that high speed of down swing influences speed of up swing, and that, in the motion of twist, the horizontal speed is little changed.

A parametric study of settlement and load transfer mechanism of piled raft due to adjacent excavation using 3D finite element analysis

  • Karira, Hemu;Kumar, Aneel;Hussain Ali, Tauha;Mangnejo, Dildar Ali;Mangi, Naeem
    • Geomechanics and Engineering
    • /
    • 제30권2호
    • /
    • pp.169-185
    • /
    • 2022
  • The urbanization and increasing rate of population demands effective means of transportation system (basement and tunnels) as well as high-rise building (resting on piled foundation) for accommodation. Therefore, it unavoidable to construct basements (i.e., excavation) nearby piled foundation. Since the basement excavation inevitably induces soil movement and stress changes in the ground, it may cause differential settlements to nearby piled raft foundation. To understand settlement and load transfer mechanism in the piled raft due to excavation-induced stress release, numerical parametric studies are carried out in this study. The effects of excavation depths (i.e., formation level) relative to piled raft were investigated by simulating the excavation near the pile shaft (i.e., He/Lp=0.67), next to (He/Lp=1.00) and below the pile toe (He/Lp=1.33). In addition, effects of sand density and raft fixity condition were investigated. The computed results have revealed that the induced settlement, tilting, pile lateral movement and load transfer mechanism in the piled raft depends upon the embedded depth of the diaphragm wall. Additional settlement of the piled raft due to excavation can be account for apparent loss of load carrying capacity of the piled raft (ALPC). The highest apparent loss of piled raft capacity ALPC (on the account of induced piled raft settlement) of 50% was calculated in in case of He/Lp = 1.33. Furthermore, the induced settlement decreased with increasing the relative density from 30% to 90%. On the contrary, the tilting of the raft increases in denser ground. The larger bending moment and lateral force was induced at the piled heads in fixed and pinned raft condition.

Effects of Combined Cervical Stabilization and Stretching Exercises on Craniovertebral Angle, Respiration, Disability, and Range of Motion in Office Workers with Forward Head Posture : A Randomized Control Trial

  • Kim, Kyung;Kang, Na-Yeon
    • 대한통합의학회지
    • /
    • 제10권3호
    • /
    • pp.13-25
    • /
    • 2022
  • Purpose : The purpose of this study was to investigate the effects of combined cervical stabilization exercise (CSE) and stretching exercise (SE) on office workers with forward head posture (FHP). Methods : A total of 32 office workers with forward head posture were randomly assigned to experimental (n=16) and control (n=16) groups. The experimental group underwent combined CSE and SE, and the control group underwent cervical self-myofascial release and SE. Both groups performed exercises for 40 min per day, thrice per week for a total of 6 weeks. Craniovertebral angle (CVA), respiration, disability, and joint range of motion (ROM) before and 6 weeks after intervention were measured and compared. Results : There was no significant between-group difference in the general characteristics (p>.05). The intra-group comparison showed significant differences in the visual analog scale (VAS) and neck disability index (NDI) of both groups post-intervention (p<.05). CVA and forced expiratory volume in 1 seconds (FEV1) were significantly improved post-intervention in the experimental group only (p<.05). In the experimental group, all ROM variables were significantly improved post-intervention. In contrast, in the control group, all ROM variables improved significantly post-intervention, except for extension (p<.05). The inter-group comparison showed significant differences in NDI, left lateral flexion, right lateral flexion, and left rotation between the two groups (p<.05). Conclusion : The combination of CSE and SE, which stabilizes the cervical spine, had positive effects on cranial rotation angle, respiration, disability, and joint ROM in office workers with forward head posture. Therefore, the combination of the two exercises may be an effective option to reduce symptoms and prevent postural problems in office workers with FHP.

자동이탈식 위험표시부표 개발에 관한 연구 (Study on the Development of Auto Releasing New Danger Mark Buoy)

  • 국승기;박혜리
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2016년도 춘계학술대회
    • /
    • pp.20-21
    • /
    • 2016
  • 항로표지란 해상교통의 안전을 도모하고 선박운항의 능률성을 향상시키기 위한 해양교통안전시설로서 국제적으로 IALA 규정 및 권고사항에 따라 적용하고 있다. 그 중 "새로운 위험물(New Danger)"는 항해용 해도 등의 수로서지에 미기재된 것으로 새로이 발견된 위험장해물을 라고 정의하고 있으며, 사주나 암초 등의 자연적 장해물 또는 침선과 같은 인위적 장해물을 포함한다. 이러한 새로운 위험물은 측방표지, 방위표지, 고립장해표지 등을 이용하거나 비상침선표지(Emergency Wreck Marking Buoy)를 사용하여 적절하게 표시하여야 한다. 그러나, 침선표지의 경우 설치의 신속성, 정확성, 부표의 특성 등의 문제로 인해 실질적인 설치 운영상의 문제가 제기 되고 있으며, 선박 침몰 사고의 경우 기상악화, 해역의 특성, 사고 위치의 확인이 어려워 신속한 신위험물표지(New Danger Mark) 설치가 어려운 실정이다. 이 연구는 선박 상갑판에 부착된 소형 침선표지가 선박의 실종 전복 침몰 등 해양사고 발생 시 일정수압에 의해 자동으로 이탈(Auto Release) 후 자기 부상(Auto Buoyance)하여 사고 발생 지점에 신속하고 정확하게 설치되도록 하는 시스템을 개발하고자 한다.

  • PDF

자동이탈식 비상침선표지 개발을 위한 개념설계 연구 (The Conceptual Design of Auto Releasing Emergency Wreck Marking Buoys)

  • 국승기;박혜리
    • 해양환경안전학회지
    • /
    • 제22권5호
    • /
    • pp.417-422
    • /
    • 2016
  • 항로표지란 해상교통의 안전을 도모하고 선박운항 능률을 향상시키기 위한 해양교통안전시설로 새로운 위험물(New Danger)은 측방표지, 방위표지, 고립장해표지 등을 이용하거나 비상침선표지(Emergency Wreck Marking Buoy)를 사용하여 적절하게 표시하여야 한다. 그러나, 침선표지의 경우 설치의 신속성, 정확성, 부표의 특성 등의 문제로 인해 실질적인 설치 운영상의 문제가 제기 되고 있으며, 선박침몰 사고의 경우 기상악화, 해역의 특성, 사고 위치의 확인이 어려워 신속한 신위험물표지(New Danger Mark) 설치가 어려운 실정이다. 이 연구는 항상 선박 상갑판에 부착된 해양안전설비 중 하나로 Maritime Buoyage System(MBS)에 근거한 자동이탈식 비상침선표지를 개발하였다. 자동이탈식 비상침선표지Auto Releasing Emergency Wreck Marking Buoy)는 총 3개의 세부기술(자동이탈, 자동릴체인, 자동구동등명기)로 구성되며, 선박 상갑판에 부착된 자동이탈식 비상침선표지가 선박의 좌초 전복 침몰 등 해양사고 발생 시 일정수압에 의해 자동으로 이탈(Auto Release) 후 자기 부상(Auto Buoyance)하여 사고 발생 지점에 신속하고 정확하게 설치된다. 이러한 자동이탈식 비상침선표지는 선박의 항해안전을 위협하는 장해물로부터 해당 해역에서의 2차 사고를 방지하고, 신속한 수색 및 구조가 이루어질 수 있도록 한다.

비개착공법으로 건설된 지하구조물 주변 지반 응력이완영역 규명 (Stress Release Zone Around Sub-structure Constructed by Non-open Cut Methods)

  • 서호성;조국환
    • 한국철도학회논문집
    • /
    • 제19권4호
    • /
    • pp.480-488
    • /
    • 2016
  • 최근 철도주변의 개발이 확산되고 있는 가운데 비개착공법을 이용하여 철도노반하부를 횡단하는 구조물을 시공하는 경우가 불가피하게 증가하고 있다. 그러나 기존선 하부를 횡단하는 구조물을 시공하는 경우 구조물 주변의 지반응력이완에 대하여 설계 시 검토는 미비한 실정이다. 본 연구에서는 비개착공법 시공 시 구조물 주변지반의 응력이완에 대하여 실내토조실험을 통하여 지반의 응력이완 범위를 규명하였고, 지중경사계를 이용한 현장계측을 통하여 지반의 수평변위를 계측하였으며, 수치해석을 통하여 응력이완영역 및 선로지지강성을 분석하였다. 실내토조실험 결과 Rankine의 수평토압 영역과 유사한 파괴면이 생성되었으며, 지중경사계를 이용한 현장계측 결과, 강관의 압입 시기를 기준으로 급격하게 변위가 발생하였으며, 또한 수치해석 결과 해석된 수평토압이 Rankine의 수평토압에 가깝게 나타났으며, 비개착 구조물 주변 지반의 수직응력이 약 40% 감소함에 따라 노반지지강성이 크게 저하됨을 알 수 있었다. 이는 열차의 주행안정성 영향을 미쳐 탈선의 위험이 증가하므로 향후 기존선 하부를 통과하는 지하구조물 시공 시 구조물 주변의 보강이 반드시 필요할 것으로 판단된다.

The Effects of Sera from Amyotrophic Lateral Sclerosis Patients on Neuromuscular Transmission and Calcium Channels in Mice

  • Yan, Hai-Dun;Kim, Ji-Mok;Jung, Sung-Jun;Kim, Jun
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제3권1호
    • /
    • pp.101-117
    • /
    • 1999
  • Amyotrophic lateral sclerosis (ALS) is a degenerative neuromuscular disease of unknown etiology in which the upper and lower motor neurons are progressively destroyed. Recent evidences support the role of autoimmune mechanisms in the pathogenesis of ALS. This study investigated the effects of sera from ALS patients on neuromuscular transmission in phrenic nerve-hemidiaphragm preparations and on calcium currents of single isolated dorsal root ganglion (DRG) cells in mice. Mice were injected with either control sera from healthy adults or ALS sera from 18 patients with ALS of sporadic form, for three days. Miniature end plate potential (MEPP) and nerve-evoked end plate potential (EPP) were measured using intracellular recording technique and the quantal content was determined. Single isolated DRG cells were voltage-clamped with the whole-cell configuration and membrane currents were recorded. Sera from 14 of 18 ALS patients caused a significant increase in MEPP frequency in normal Ringer's solution $(4.62{\pm}0.14\;Hz)$ compared with the control $(2.18{\pm}0.15\;Hz).$ In a high $Mg^{2+}/low\;Ca^{2+}$ solution, sera from 13 of 18 ALS patients caused a significant increase in MEPP frequency, from $2.18{\pm}0.31$ Hz to $6.09{\pm}0.38$ Hz. Sera from 11 of 18 patients produced a significant increase of nerve-evoked EPP amplitude, from $0.92{\pm}0.05$ mV to $1.30{\pm}0.04$ mV, while the other seven ALS sera did not alter EPP amplitude. In the ALS group, EPP quantal content was also elevated by the sera of 14 patients (from $1.49{\pm}0.07$ to $2.35{\pm}0.07).$ MEPP frequency and amplitude in wobbler mouse were $4.03{\pm}0.53$ Hz and $1.37{\pm}0.18$ mV, respectively, which were significantly higher than those of wobbler controls (wobblers without the symptoms of wobbler). Sera from ALS patients significantly reduced HVA calcium currents of DRG cells to 42.7% at -10 mV. Furthermore, the inactivation curve shifted to more negative potentials with its half-inactivation potential changed by 6.98 mV. There were, however, significant changes neither in the reversal potential of $I_{Ca}$ nor in the I-V curve. From these results it was concluded that: 1) The serum factors of sporadic ALS patients increase neuromuscular transmission and can alter motor nerve terminal presynaptic function. This suggests that ALS serum factors may play an important role in the early stage of ALS, and 2) Calcium currents in DRG cells were reduced and rapidly inactivated by ALS sera, suggesting that in these cells, ALS serum factors may exert interaction with the calcium channel.

  • PDF

성인에서의 특이 다지증 -1례 보고- (Unusual Polydactyly of the Foot in Adults -A Case report-)

  • 이경태;옹상석;양기원;탁상보
    • 대한족부족관절학회지
    • /
    • 제3권1호
    • /
    • pp.53-57
    • /
    • 1999
  • Polydactyly is the most common congenital deformity of the foot. The authors present an unusal case of polydactyly of the foot in an otherwise healthy adult male. The patient has an mixed type of polydactyly composed of polysyndactyly of the first toe, Y shaped second metatarsal and polysyndactyly with the fusion to the forth toe of the fifth toe. Meticulous. preoperative plan was prepared and performed at the operation. Main procedures were as follows : 1) Excision of extradigit of first toe and first metatarsocuneiform joint fusion. 2) Excision of lateral bud of second metatarsal and plantar-medial osteotomy of the medial bud. 3) Metatarsal head resection arthroplasty of third & forth metatarsophalangeal joint and 4) Excision of medial polydactyly of the fifth toe and syndactyly release and split thickness skin graft. Postoperatively, The forefoot width was reduced from 11.5 to 9.5cm and the pain was relieved.

  • PDF

Finding the optimum shape of the energy dissipator to minimize the impact force due to the dam break flow

  • Asrini Chrysanti;Sangyoung Son
    • Ocean Systems Engineering
    • /
    • 제14권2호
    • /
    • pp.157-169
    • /
    • 2024
  • The sudden release of water from a dam failure can trigger bores on a flat surface and exert substantial impact forces on structures. This flow poses a high-risk flood hazard to downstream urban areas, making it imperative to study its impact on structures and devise effective energy dissipators to mitigate its force. In this study, a combination of Genetic Algorithm optimization and numerical modeling is employed to identify the optimal energy dissipator. The analysis reveals that a round arc-shaped structure proves most effective, followed by a triangular shape. These shapes offer wide adaptability in terms of structure dimensions. Structures with higher elevation, especially those with round or triangular shapes, demonstrate superior energy dissipation capabilities. Conversely, square-shaped structures necessitate minimal height to minimize impact forces. The optimal width for dissipating energy is found to be 0.9 meters, allowing for effective wave run-up and propagation. Furthermore, the force exerted on structures increases with higher initial water levels, but diminishes with distance from the dam, highlighting the importance of placement in mitigating impact forces.

확산계수의 모델링방법이 대기확산인자에 미치는 영향 (Influence of Modelling Approaches of Diffusion Coefficients on Atmospheric Dispersion Factors)

  • 황원태;김은한;정해선;정효준;한문희
    • Journal of Radiation Protection and Research
    • /
    • 제38권2호
    • /
    • pp.60-67
    • /
    • 2013
  • 가우시안 플륨모델(Gaussian plume model)을 사용한 대기확산의 예측에서 확산계수는 결과에 중요한 영향을 미치는 변수이다. 확산계수의 평가방법은 다양하며, 본 연구에서는 미국 원자력규제위원회(U. S. NRC) 권고 규제지침, 캐나다 원자력안전위원회(CNSC) 권고 규제지침, 확률론적 사고결말해석코드 MACCS와 MACCS2에서 권고 또는 적용하는 방법을 고찰하였다. U. S. NRC에서 권고하는 부지적합성 평가를 위한 가상사고시 대기확산모델을 기반으로 확산계수의 평가방법이 대기확산인자에 미치는 영향을 분석하였다. 확산계수는 Pasquill-Gifford 곡선을 기반으로 각기 다른 연구자들에 의해 얻어진 곡선의 피팅식(curve fitting equations)을 적용 또는 권고하고 있음을 확인하였다. 수평확산계수는 모든 규제지침과 코드에서 플륨의 사행효과를 반영하여 보정하고 있으나 그 적용 방법에 있어서는 차이를 나타냈다. 수직확산계수는 U. S. NRC 권고 규제지침을 제외하고 표면거칠기를 반영하여 보정하고 있다. 특정 표면거칠기에 대해 확산계수의 적용방법에 따라 대기확산인자는 최대 약 4배의 차이를 나타냈다. 표면거칠기는 대기확산인자에 중요한 영향을 나타냈으며, 동일 적용방법에 대해 표면거칠기에 따라 대기확산인자는 약 2~3배의 차이를 나타냈다.