• Animal Systematics, Evolution and Diversity
• /
• 제32권3호
• /
• pp.234-239
• /
• 2016

Two species of mantid shrimps were collected from southern part of Korea and identified as Kempella mikado and Squilloides leptosquilla of the Squillidae. The former species is characterized by having a dactylus of the raptorial claw with six teeth, only the fifth thoracic somite with a single spinous lateral process, and the fifth abdominal somite with a pair of black dorsal patches. However, the latter species is characterized by having a dactylus of the raptorial claw with four teeth, and the fifth to seventh thoracic somites each with a single lateral process. Both species are described with figures and photographs. The present records are extensions of their geographical distributions and new records in Korea. Hence, a total of six species of the stomatopods have been recorded in Korea up to date: Oratosquilla oratoria, Faughnia formosae, Taku spinosocarinatus, Chorisquilla spinosissima, Kempella mikado, and Squilloides leptosquilla.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.7-8
• /
• 2006

The governing equations for high-speed lateral atomizing injector nozzle flow based on the LES-VOF model in conjunction with the CSF model are presented, and then an integrated parallel computation are performed to clarify the detailed atomization process of a high speed nozzle flow and to acquire data which is difficult to confirm by experiment such as atomization length, liquid core shapes, droplets size distributions, spray angle and droplets velocity profiles. According to the present analysis, it is found that the atomization rate and the droplets-gas two-phase flow characteristics are controlled by the turbulence perturbation upstream of the injector nozzle, hydrodynamic instabilities at the gas-liquid interface, shear stresses between liquid core and periphery of the jet. Furthermore, stable and a high-resolution computation can be attained in the high density ratio (pl/ pg = 554) conditions conditions by using our numerical method.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.171-176
• /
• 2012

So far, carbide insert production technology was carried out using a diamond grinding wheel. This production technology has problem that raise production costs and decrease in productivity. The SIDE PRESS method to solve this problem have been developed. In this paper, the machining characteristics of lateral chip breaker turning inserts produced by the SIDE PRESS method was studied. The cutting force and the resulting surface roughness were measured at various cutting conditions. The experimental results indicate that the chip breaker inserts of three-dimensional geometry is the best cutting performance.

• Annals of Clinical Neurophysiology
• /
• 제19권1호
• /
• pp.68-70
• /
• 2017

Flail arm syndrome (FAS), known as one of the atypical amyotrophic lateral sclerosis (ALS) variants, has a similar clinical course and pathologic findings as ALS. Therefore it is difficult to differentiate between ALS and FAS at a glance. There are few reports involving individual analysis of FAS patients to date. The findings of polysomnography (PSG) in patient with FAS are not well known. We report a male FAS patient with review of literatures and several issues related to the diagnostic process.

• Journal of Information Display
• /
• 제2권2호
• /
• pp.7-12
• /
• 2001

A viscous Ni solution was coated over amorphous Si thin film for evenly spread of Ni metal source. The Ni s. prepared by dissolving $NiCl_2$ into IN HCI and mixing with propylene glycol. $NiCl_2$ and Ni were deposited on the amorphous film after oven dry and they enabled to obtain a uniform crystallization. The crystallization using the viscous Ni solution was a Ni-silicide mediated process, the same process used with Ni metal layer. The crystallization temperature was lowered to $480^{\circ}C$ by the synergy effect of silicide-mediated crystallization and microwave-induced crystallization. Lateral crystallization was also enhanced such that the velocity of lateral crystallization by microwave annealing became faster than by furnace annealing.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.77-82
• /
• 2011

The piston-cylinder mechanism is widely adopted in the hydraulic machine components. In these cases, the hydrodynamic pressures are generated in the clearance gap between the piston and cylinder under lubrication action of the piston. Under the eccentric and tilted condition of the piston in the cylinder bore, the non-symmetric pressure distributions in the circumferential direction result in lateral forces. When the lateral forces act as increasing the eccentricity and tilting ratios, excessive wear can be result in cylinder and piston which are well known 'hydraulic locking' phenomena. In this paper, the hydrodynamic pressures generated in the clearance are measured using a stationary piston and moving cylinder apparatus. The experimental results showed that the hydrodynamic pressure distributions are highly affected by the speed and eccentricity of the cylinder and the oil viscosity.

• Animal Systematics, Evolution and Diversity
• /
• 제35권3호
• /
• pp.123-135
• /
• 2019

Elaphognathia monodi (Gurjanova, 1936) and Elaphognathia kikuchii Nunomura, 1992 are newly reported based on the materials collected from Wando Island and Jeju Island in Korea, respectively. Elaphognathia monodi is distinguished by the following characteristics: the lateral margin of the cephalon is narrowing posteriorly; the frontal border is slightly concave and has a small mediofrontal process, a pair of superior frontolateral processes, and a pair of inferior frontolateral processes. Elaphognathia kikuchii can be distinguished by the following characteristic features: the lateral margin of the cephalon is narrowing anteriorly; the frontal border has a small mediofrontal process and twelve pairs of simple setae along with concavity.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권2호
• /
• pp.166-171
• /
• 2016

Nickel silicide is main issue in Polycrystalline silicon Thin Film Transistor (TFT) which is made by Metal Induced Lateral Crystallization (MILC) method. This Nickel silicide acts as a defect center, and this defect is one of the biggest reason of the high leakage current. In this research, we fabricated polycrystalline TFTs with novel method called Edge Cut (EC). With this new fabrication method, we assumed that nickel silicide at the edge of the channel region is reduced. Electrical properties are measured and trap state density also calculated using Levinson & Proano method.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.174-181
• /
• 2001

An upper bound elemental technique(UBET) has been carried out to predict the forming load, the deformation pattern and the extrude length of the lateral extrusion of a spider for the automotive universal joint. For the upper bound analysis, a kinematically admissible velocity field(KAVF) is proposed. From the proposed velocity field, the upper bound load, the deformation pattern and the average length of the extruded billets are determined by minimizing the total energy consumption rate which is a function of unknown velocities at each element. Experiments are carried out with antimony-lead billets at room temperature using the rectangular shape punch. The theoretical prediction of the forming load, the deformation pattern and the extruded length are good in agreement with the experimental results.

• Annals of Clinical Neurophysiology
• /
• 제10권1호
• /
• pp.62-65
• /
• 2008

We report a patient with amyotrophic lateral sclerosis (ALS) who developed a pneumothorax after needle electromyography (EMG), probably of the intercostal muscles. Needle EMG on intercostal muscles has a high risk of pneumothorax, not only because electromyographers are unfamiliar to its technique, but also due to its close anatomical location to the pleural cavity. In our patient, advanced intercostal muscle atrophy due to disease process would have increased the risk further.