• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1000-1005
• /
• 2010

Ride comfort is an important factor for the development of a high-speed train. The aerodynamic force to a high speed train inside tunnels increases the car-body vibration and makes its ride comfort worse. In this study, the aerodynamic force is estimated through a CFD analysis using ADINA, and its car-body vibration and ride comfort are calculated for the aerodynamic force which acts on the side of the train. The numerical results show that the vibration is a lateral mode of the car-body and decreases the ride comfort. On the basis of this numerical simulation, more accurate simulation is necessary for the shape of tunnel and the lateral suspension system of a high speed train.

• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.454-464
• /
• 2012

In this study, fitness tests for slacks were divided into shape fitness test and motion fitness test, and the fitness test conditions for slacks were designed as the first step for standardization of measuring scales. Shape fitness test consisted of analyzing the parameters of appearance sensory tests as described in preceding studies, performing a simulated appearance sensory test, collecting and considering apparel experts' opinions about the test parameters, and establishing test conditions in terms of test regions, descriptions and faces. For the regions of the abdomen, hip, crotch, thighs, and knees, the parameter of unnecessary wrinkle/stretch was observed from the anterior and posterior body, and then evaluated; for waist, hip, crotch, knee and hem circumference, the parameters of ease and horizontality were observed from the anterior body and posterior body followed by evaluation; and, at the levels of waist, hip, crotch, knee and hem circumference, the division of the lateral line were observed from the lateral body followed by evaluation. Motion fitness test was composed of reviewing and analyzing comparatively the methods of motion fitness tests as mentioned in preceding studies, and establishing test conditions in terms of test motions and test regions. For each of the waist, abdomen, hip, crotch, and knees, wear sensation was tested in the positions as follows: upright standing, moderate walking, chairsitting, bending forward to the maximum, and kneeling down, provided that as the measured points of garment pressure, anterior waist, abdominal protrusion, buttock protrusion, crotch, and midpatella were set and tested.

• Journal of radiological science and technology
• /
• v.46 no.4
• /
• pp.287-294
• /
• 2023

This study was conducted to ultimately reduce unnecessary radiation exposure by emphasizing the need and importance of correct positioning by examining the positioning relationship of anatomical structures in the human body and changes in X-ray images according to changes in patient positioning during the left lateral chest X-ray examination. This study investigated and analyzed previously published papers and books on the left lateral chest X-ray examination to find out the importance of positioning in the left lateral chest X-ray examination. To find out the importance of correct positioning in the left lateral chest X-ray, we compared three images of incorrectly positioned right thorax and left thorax rotated forward and the lower median surface of the body leaning against the image receptor. In the left lateral chest examination, a distorted image was obtained in which the shape of the anatomical structure observed in the image was changed according to the presence or absence of rotation of the patient and the inclination of the median visual surface. X-ray images with the most accurate and large amount of information were obtained from X-ray images with the correct positioning performed during left lateral chest X-ray examination. Therefore, It is believed that the left lateral chest X-ray examination will have beneficial effects such as providing accurate medical information, preventing misdiagnosis, reducing social costs, and ultimately reducing radiation exposure.

• Imaging Science in Dentistry
• /
• v.39 no.1
• /
• pp.7-11
• /
• 2009

Purpose: The purpose of this study was to assess the prevalence and radiographic characteristics of the nuchal ligament ossification on lateral cephalometric radiographs in Koreans. Subjects and Method: I review and interpreted the lateral cephalometric radiographs from 4,558 patients (1,857 males and 2,701 females, age range from 2 to 79 years) who visited the Kyungpook National University Dental Hospital from January 1, 2008 to February 3, 2009. I grouped the shapes of nuchal ligament ossification as round, rod-like, and segmented shape. And localized the ossification as the involvement of anterior cervical vertebral body. The data were analyzed by using chi-squared test with two-tailed and at a 5% significance level. Results: Among those who showed the nuchal ligament ossification, he mean age of the 143 males was 51.1 and that of the 97 females was 48.0 years. It as not observed completely below teens, and was observed 1% in twenties, 6.1% in thirties, 18.6% in forties, and 26.3% over fifties. It was significantly prevalent in older age group (P<0.01) and in males than females among the same age group (P<0.05). The shapes of nuchal ligament ossification were as follows in order of frequency: rod-like (49.2%), round (30.4%), and segmented (20.4%). The highest involvement of ossification as found at the level of C5 (67.9%), C4 (29.2%), C6 (22.9%), C3 (3.3%), C7 (2.9%), C2 (0.8%), and C1 (0.4%). Conclusion: The nuchal ligament ossifications on lateral cephalometric radiographs were showed as round, rod-like, or segmented shape. The nuchal ligament ossification is often observed after the age of 40 and is observed more frequently in males than females. The highest shape of nuchal ligament ossification was rod-like shape and the highest involvement of cervical spine was C5.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.8
• /
• pp.1190-1202
• /
• 2009

A 3D body scan measurement (SM) is used as an alternative to physical measurements (PM) as the information for designing industrial products. This study compared the mean difference (MD) between SM and PM by gender and analyzed the causes of the difference. The data used in this study were the scan measurements and physical measurements of adults aged twenty to seventy years old of the fifth Size Korea survey. The results of this study are as follows: 1. The comparison of MD between men and women for all subjects: The measurement of the significant differences between men and women were height, neck base girth, chest girth, under-bust girth, waist girth, armscye girth, back length, and foot length. The causes of difference are the difference of body shape. 2. The comparison of MD between men and women by BMI groups: Many measurements had significant differences between men and women at normal weight and overweight but underweight. Some measurements had significant differences only at a specific BMI group because the body shape difference between men and women is revealed clearly in the group. The comparison of MD between men and women by age groups: The measurements that show significant difference at more than four age groups were neck girth, chest girth, under-bust girth, waist girth, armscye girth, and foot length. The height and abdomen girth had a significant difference in the age range of 20's and 30's. There were measurements that increase MD with an increase in age; under-bust girth and lateral shoulder length for women and lateral shoulder length for men. This comparison of MD between men and women provide the correct guidelines for the use of SM.

• Applied Microscopy
• /
• v.24 no.3
• /
• pp.1-9
• /
• 1994

Pardosa astrigera possessed eight eyes arranged in three rows on the frontal carapace. A pair of small anterior lateral eyes (ALE) flanked each side by an anterior median eyes (AME) lay along the anterior margin that was situated on the anterior row of clypeus. The anterior lateral eye was composed of cornea, vitreous body, and retina. Cornea was made up mainly of exocuticle lining the cuticle. Lens in anterior lateral eye was biconvex type which bulged into the cavity of the eyecup. Outer and inner central region of lens were approximately spherical with radius of curvature $5.6{\mu}m$ and $12.5{\mu}m$, respectly. Vitreous body formed a layer between the cuticular lens and retina. They formed biconcave shape. Retina of the anterior lateral eyes was composed of three types of cells: visual cells, glia cells, and pigment cells. The visual cells were unipolar neuron, as were the receptor of the posterior lateral eye. But cell body was unique to the anterior lateral eyes. They were giant cell, relatively a few in number, and under the layer of vitreous bodies. Each visual cell healed rhabdomeres for a short stretch beneath the cell body. Rhabdomes were irregulary pattern in retina and electron dense pigment granules scattered between the rhabdomes. Glia cell situated at the cell body of visual cell and glia cell process reached to rhabdomere portion. Below the rhabdome, tapetum were about $30{\mu}m$ distance from lens, which composed of 4-5 layers. It was about $25{\mu}m$ length that intermediate segment of distal portion of visual cell. Electron dense pigment granules between the intermediate segment were observed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1779-1785
• /
• 2010

The experiment is designed to create some useful data on the dressed shapes that contribute to simulating the adaptability of clothes. We studied the dressed shapes of blouse with above-elbow sleeves and sleeveless according to five types of arm movement (basic posture, reach forward 45, 90, and reach lateral 45, 90) in the stand-posture. Experiments were conducted to understand the dressed shape through 3-D measurement Vivid 910 and to investigate the width, depth, area distribution and gap of the shape of blouses on the section map with a software program for 3-D shape analysis, Rapid Form 2004. The Data were analyzed by factor analysis. The results of this study are as follows: The ratio of depth per width in the stand-posture was lower than other arm movements and the reach lateral was higher than the reach forward. The gap of the upper body was a briefed 4 factor; front, front-side, back, and back-side. It was higher than the sleeveless with a change of the gap in the dressed blouse with above-elbow sleeves by arm movements per stand-posture. The divisional gap shows the adaptability of clothes according to the types of blouse and arm movements in the change of the ratio.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.368-382
• /
• 1997

Through the recognition and the satisfaction of the lower part of the women body in 20s' we studied 202 respondents of the women in 20s' to analyze what lower part shape they want. And also through the measurment, we tried to analyze their wants. The results are as follows. 1. The women in 20s' think ideal body shapes are highstature, long legs, slander waist, hip, abdomen, thigh, ankle, and light weight. And so it needs to be studied to make slacks pattern which show slander girth and long length. 2. At the result of the body measurments the laterallargeness related with width, girth and depth items of the first factor rated 33.1 oyo in the variousfactors, and vertical largeness related with highness of the second fact rated 18.3% the first and the second factors affect importantly in the lower part of women body in 20s'. 3. At the result of the group analysis, the type divided five kinds, according to the body measurments, the type of 1, 3, 4, are normal, the type of 2 is weak, the type of 5 is fat. The type of 1 shows the largest distribution of all held 108, the flank is standard somatotype. The type of 2 is the second largest distribution held 59, the flank is forwardsomatotype. The type of 3 is the smallest of all types in the lateral largeness, the flankis turning over somatotype. The type of 4 is large both in the lateral largenessand in the vertical largeness, the flank is forward somatotype. The type of 5 is the fat type. The lateral type is the largest, the flank is forward turning over somatotype. The type of 5 showed the smallest distribution.

• The Research Journal of the Costume Culture
• /
• v.7 no.6
• /
• pp.140-158
• /
• 1999

The purposes of this study are to examine the characters of the lower body shape in the middle aged women and to make slacks pattern on the base of four difference body shapes. The lower body shapes were classified into 4 types on the basis of their lateral view silhouettes. The slacks patterns were based on the lower body shape characters and resulted in followings. In “Type 1” of the right body shape with the standard protrusion of abdomen and hips, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4+0.5㎝+0.5㎝+fold(2.5㎝) and the back waist girth W/4+0.5㎝-0.5㎝+dart(3.5㎝). The front hip girth was defined as H/4+2.0㎝+0.5㎝ and the back hip girth as H/4+2.0㎝-0.5㎝ due to its increased ease amount produced by abdominal fat deposition. In the experimental pattern of “Type 2” with prominent hips, the front and back differences of the waist girth and the hip girth and the hip girth were defined as 1.0㎝ and 2.0㎝ separately. Accordingly, the front waist girth was W/4+0.5㎝+1.0㎝+fold(2.0㎝), the back waist girth W/4+0.5㎝-0.1㎝+dart(6.5㎝), the front hip girth H/4+2.0㎝+1.0㎝ and the back hip girth H/4+2.0㎝-1.0㎝. In “Type 3” with the prominent abdomen and the flat hips, the front waist girth was set up as W/4+0.5㎝+0.5㎝+fold(4.5㎝) for the increased front fold amount and the back waist girth was W/4+0.5㎝+0.5㎝+dart(3.0㎝). The front hip girth was made as H/4+2.5㎝+0.5㎝ and the back hip girth H/4+2.5㎝-0.5㎝. In “Type 4” with prominent abdomen and hips, considered were ① the increased front fold amount due to the abdominal protrusion, ② the increased back dart amount and the decreased back dart length owing to the hips prominent and ③ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5㎝+2.0㎝+fold(5.0㎝), the back waist girth as W/4+0.5㎝-2.0㎝+dart(4.0㎝), the front hip girth as H/4+2.0㎝+1.0㎝ and the back hip girth as H/4+2.0㎝-1.0㎝. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.712-719
• /
• 2012

Penetrator with enhanced lateral effect(PELE) is a newconcept projectile, without dynamite and fuze. It consists of high-density jacket, closed at its rear end and filled with a low-density filling material. To study the explosion characteristics of PELE, by AUTODYN-3D code, the calculation models of projectile body and bullet target are established and the process of penetrating aluminum-2024 alloy target of PELE is simulated, and the scattering characteristics after penetrating aluminum-2024 alloy target of PELE are studied by different initial velocity. The explicit finite element analysis of PELE fragmentation was implemented with stochastic failure criterion in AUTODYN-3D code. As expansion of filling, the fragments were obtained velocities and dispersed laterally and further more enhancing the damage area largely. The number and shape of the PELE fragments were different depend on impact velocity and incidence angle of filling which fragment generated during penetration and lateral dispersion process.