• Journal of Korean Neurosurgical Society
• /
• v.61 no.2
• /
• pp.243-250
• /
• 2018

Objective : To compare the morphometry of subaxial cervical spine between cerebral palsy (CP) and normal control. Methods : We retrospectively analyzed 72 patients with CP, as well as 72 patients from normal population. The two groups were matched for age, sex, and body mass index. Pedicle, lateral mass (LM), and vertebral foramen were evaluated using computed tomography (CT) imaging. Pedicle diameter, LM height, thickness, width and vertebral foramen asymmetry (VFA) were measured and compared between the two groups. Cervical dynamic motion, disc and facet joint degeneration were investigated. Additionally, we compared the morphology of LM between convex side and concave side with cervical scoliotic CP patients. Results : LM height was smaller in CP group. LM thickness and width were larger in CP group at mid-cervical level. In 40 CP patients with cervical scoliosis, there were no height and width differences between convex and concave side. Pedicle outer diameter was not statistically different between two groups. Pedicle inner diameter was significantly smaller in CP group. Pedicle sclerosis was more frequent in CP patients. VFA was larger in CP group at C3, C4, and C5. Disc/facet degeneration grade was higher in the CP group. Cervical motion of CP group was smaller than those of the control group. Conclusion : LM morphology of CP patients was different from normal population. Sclerotic pedicles and vertebral foramen asymmetry were more commonly identified in CP patients. CP patients were more likely to demonstrate progressive disc/facet degeneration. This data may provide useful information on cervical posterior instrumentation in CP patients.

• Journal of Biomedical Engineering Research
• /
• v.14 no.1
• /
• pp.89-96
• /
• 1993

During high frequency ventilation (HFV), mean alveolar pressure has been measured to increase with mean airway opening pressure controlled at a constant level in both humans and experimental animals. Since this phenomenon could potentiate barotrauma limiting advantages of HFV, the present study theoretically predicted the difference between menu alveolar and airway opening pressures ($MP_{alv}$). In a Weibel's trumpet airway model, approximated formula for $MP_{alv}$ was derived based on momentum conservation assuming a uniform velocity profile. The prediction, equation was a func pion of gas density($\rho$), mean flow rate(Q), and diameter of the airway opening where the pressure measurement was made($D_0$) : $MP_{alv}=4{\rho}(Q/D_0^{2})^2$. This was a result of the difference in crosssectional area between the alveoli and the airway opening. A simple aireway model experiment was performed and the results well fitted to the prediction, which demonstrated the validity of the present analysis. Previously reported $MP_{alv}$ data from anesthetized dogs in supine position were comparable to the predicted values, indicating that the observed dissociation between mean alveolar and airway opening pressures during HFV can be explained by this innate geometric (or cross-sectional area) asymmetry of the airways. In lateral position, however, the prediction substantially underestimated the measurements suggesting involvement of other important physiological mechanisms.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.4
• /
• pp.337-345
• /
• 2011

Purpose: The purpose of this study was to define the relation of the degree of menton deviation and 3-D CT (computerized tomography) measurements of the glenoid fossa and the mandible, which are considered to have an influence on menton deviation. Methods: The CT images were obtained in 60 adults and these were transmitted to a computer and reconstructed using computer software. According to the degree of the menton deviation, which was measured on the posteroanterior cephalogram, the subjects were divided into the menton deviated group (30 adults) and the symmetry group (30 adults). A total of 11 measurements that might have an effect on menton deviation were determined and these were measured in the right and left sides using the function of 3-D measurement in the computer program. The 11 measurements consist of 6 measurements in the glenoid fossa (vertical position of the glenoid fossa and articular eminence, the sagittal position of the glenoid fossa and articular eminence, the depth of the glenoid fossa, and the anterior angle of the glenoid fossa), and 5 measurements in the mandible (ramus length, frontal ramal inclination, lateral ramal inclination, body length, body height). Results: The comparison of the differences between the menton deviated and symmetry groups and correlation analysis on the degree of menton deviation were carried out. The results of comparison of the right and the left difference between the menton deviated and symmetry groups showed that the vertical position and depth of the glenoid fossa were significantly increased in the menton deviated group. Conclusion: The results of the present study show that consideration of the shape and position of the glenoid fossa is necessary for making the diagnosis and administering proper treatment in facial asymmetry patients and especially growing patients.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.369-376
• /
• 2013

The purposes of this study were to assess dynamic stability toward pelvis-spine column distortion during running and to compare the typical three-dimensional angular kinematics of the trunk motion; cervical, thoracic, lumbar segment spine and the pelvis from the multi-segmental spine model between exercise group and non-exercise group. Subjects were recruited as exercise healthy women on regular basis (group A, n=10) and non-exercise idiopathic scoliosis women (group B, n=10). Data was collected by using a vicon motion capture system (MX-T40, UK). The pelvis, spine segments column and lower limbs analysiaed through the 3D kinematic angular ROM pattern. There were significant differences in the time-space variables, the rotation motion of knee joint in lower limbs and the pelvis variables; obliquity in side bending, inter/outer rotation in twisting during running leg movement. There were significant differences in the spinal column that is lower-lumbar, upper-lumbar, upper-thoracic, mid-upper thoracic, mid-lower thoracic, lower thoracic and cervical spine at inclination, lateral bending and twist rotation between group A and group B (<.05, <.01 and <.001). As a results, group B had more restrictive motion than group A in the spinal column and leg movement behaved like a 'shock absorber". And the number of asymmetry index (AI) showed that group B was much lager unbalance than group A. In conclusion, non-exercise group was known to much more influence the dynamic stability of equilibrium for bilateral balance. These finding suggested that dynamic stability aimed at increasing balance of the trunk ROM must involve methods and strategies intended to reduce left/right asymmetry and the exercise injury.

• Imaging Science in Dentistry
• /
• v.44 no.1
• /
• pp.15-20
• /
• 2014

Purpose: This study aimed to assess the three-dimensional (3D) facial changes after orthognathic surgery by evaluating the spherical coordinates of facial lines using 3D computed tomography (CT). Materials and Methods: A 19-year-old girl was diagnosed with class III malocclusion and facial asymmetry. Orthognathic surgery was performed after orthodontic treatment. Facial CT scans were taken before and after orthognathic surgery. The patient had a menton deviation of 12.72 mm before surgery and 0.83 mm after surgery. The spherical coordinates of four bilateral facial lines (ramal height, ramal lateral, ramal posterior and mandibular body) were estimated from CT scans before and after surgery on the deviated and opposite side. Results: The spherical coordinates of all facial lines changed after orthognathic surgery. Moreover, the bilateral differences of all facial lines changed after surgery, and no bilateral differences were zero. Conclusion: The spherical coordinate system was useful to compare differences between the presurgical and postsurgical changes to facial lines.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.91-105
• /
• 1992

For the analysis of multistory frames with sidesway, no adequate procedures can be found in the classical methods of structural analysis. Even well-known procedures such as the slope-deflection method and the moment distribution method may not be effective tools since those methods require a multiple of computational labor and/or yield results of approximate values. In this study, a direct method is developed and proposed for the analysis of multistory frames with sidesway, which is due to the lateral loads, asymmetry of the structure itself, or asymmetry of vertical loadings. The proposed method is to obtain simple forms of equations derived by a mathematical formulation of the moment distribution procedure combined with successive correction concept. Numerical illustrations show that the results obtained by the proposed method agree well with those by rigorous ones. Undoubtedly, this newly developed method can be applied more easily for the analysis of structural frames without joint translation as well as continuous beams.

• Imaging Science in Dentistry
• /
• v.51 no.1
• /
• pp.17-25
• /
• 2021

Purpose: This study was performed to investigate mandibular canal displacement in patients with ameloblastoma using a 3-dimensional mirrored-model analysis. Materials and Methods: The sample consisted of computed tomographic scans of patients with ameloblastoma (n=10) and healthy controls (n=20). The amount of mandibular canal asymmetry was recorded as a continuous variable, while the buccolingual (yaw) and supero-inferior (pitch) directions of displacement were classified as categorical variables. The t-test for independent samples and the Fisher exact test were used to compare groups in terms of differences between sides and the presence of asymmetric inclinations, respectively (P<0.05). Results: The length of the mandibular canal was similar on both sides in both groups. The ameloblastoma group presented more lateral (2.40±4.16 mm) and inferior (-1.97±1.92 mm) positions of the mental foramen, and a more buccal (1.09±2.75 mm) position of the middle canal point on the lesion side. Displacement of the mandibular canal tended to be found in the anterior region in patients with ameloblastoma, occurring toward the buccal and inferior directions in 60% and 70% of ameloblastoma patients, respectively. Conclusion: Mandibular canal displacement due to ameloblastoma could be detected by this superimposed mirrored method, and displacement was more prevalent toward the inferior and buccal directions. This displacement affected the mental foramen position, but did not lead to a change in the length of the mandibular canal. The control group presented no mandibular canal displacement.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.1-7
• /
• 2000

It is important that the orthodontist accurately assess the degree to which facial asymmetry contributes to a given malocclusion before treatment planning. P-A, submentovertex and verticosubmental view have been used in the assessment of facial asymmetry. Among them, submentovertex view is rarely used because it has low reproducibility and is short of normal data and proper analysis method. The purpose of this study was to develop a submentovertex cephalomentrics and obtain normal data in Korean adults. The subjects consisted of 40 normal adults (male : 22, female 18) without the experience of orthodontic treatment. We find the 2 angular and 9 linear measurements. Though submentovertex cephalomentrics has the limitation in comparing the absolute length between right and left, it is useful to examine the relationship of skeletal and dental midline, the shape and location of condyle head and the shape of mandibular body in submentovertex view Therefore, if we understand the limitation of submentovertex cephalomentrics and use lateral , P-A and submentovertex cephalomentrics together, we will measure the location and amount of skeletal disharmony more exactly.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.5
• /
• pp.373-381
• /
• 2021

Objectives: In the present study, the effects of sagittal split ramus osteotomy (SSRO) combined with intraoral vertical ramus osteotomy (IVRO) for the treatment of asymmetric mandible in class III malocclusion patients were assessed and the postoperative stability of the mandibular condyle and the symptoms of temporomandibular joint disorder (TMD) evaluated. Materials and Methods: A total of 82 patients who underwent orthognathic surgery for the treatment of facial asymmetry or mandibular asymmetry at the Department of Oral and Maxillofacial Surgery, Dong-A University Hospital, from 2016 to 2021 were selected. The patients that underwent SSRO with IVRO were assigned to Group I (n=8) and patients that received bilateral SSRO (BSSRO) to Group II (n=10, simple random sampling). Preoperative and postoperative three-dimensional computed tomography (CT) axial images obtained for each group were superimposed. The condylar position changes and degree of rotation on the superimposed images were measured, and the changes in condyle based on the amount of chin movement for each surgical method were statistically analyzed. Results: Group I showed a greater amount of postoperative chin movement. For the amount of mediolateral condylar displacement on the deviated side, Groups I and II showed an average lateral displacement of 0.07 mm and 1.62 mm, respectively, and statistically significantly correlated with the amount of chin movement (P=0.004). Most of the TMD symptoms in Group I patients who underwent SSRO with IVRO showed improvement. Conclusion: When a large amount of mandibular rotation is required to match the menton to the midline of the face, IVRO on the deviated side is considered a technique to prevent condylar torque. In the present study, worsening of TMD symptoms did not occur after orthognathic surgery in any of the 18 patients.

• Journal of Oral Medicine and Pain
• /
• v.14 no.1
• /
• pp.57-66
• /
• 1989

66 patients with temporomandibular disorders were selected for experimental group, and 45 normal subjects who were Dental students were selected for control group. Average age of experimental group was 30.5 years, Male to Female ratio was 2 : 3, and their age distribution were teen-ages to seventh decades. Transcranial radiography (TR) with Denar Accurad 100 was used for each group to get the values of width in joint spaces and to investigate the bony changes of articular surfaces and relative condylar position to articular fossa. In addition to TR, clinical interview and routine charting about amount of mandibular movements and occlusal variations were carried out in experimental group. The obtained results were as follows : 1. The mean values of joint space with in control group were 2.15mm to anterior, 2.98mm to superior and 2.29mm to posterior and the value of relative condylar position to the deepest portion of articular fossa was 0.21mm to anterior. In experimental group, those values were 2.01mm, 2.14mm 2.22mm and 0.12mm to posterior in sequence, respectively. Joint spaces in experimental group, therefore, were inclined to decreased, and relative condylar position was inclined to retrude. Joint space in control group showed symmetric condylar position, but in experimental group showed asymmetry. 2. Non-affected joints with no bony changes in experimental group showed the narrowest joint spaces which were thought to manifest the abnormal stress to non-affected side to dysfunctional state of contralateral affected joints. 3. Amount of mandibular movements in experimental group were within normal values in lateral movements and in protrusive movement but in opening movement with or without passive stretch, those were lower than normal values. Frequency of occlusal variation, for example, protrusive posterior contacts, open bite, median line shift to lateral side were inclined to increase with bony changes and with crepitus.