• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.609-613
• /
• 1986

The resonance frequency and the gain for oscillation of external cavity diode lasers are derived by approximating the phase and the gain conditions. By modifying single mode rate equations for the external cavity diode laser, steady state solutions and their stability are studied.

• 한국레이저가공학회지
• /
• 제15권1호
• /
• pp.20-22
• /
• 2012

This papers show new technology of thin disk type resonator lasers which are well kwon technology by TRUMPF.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.131-134
• /
• 1991

We describe the effects of additional feedback in external cavity semiconductor lasers, which are sensitive to feedback phase. It is shown that additional feedback with favorable phase can serve to enhance mode selectivity. The optimum feedback conditions to maximize the system immunity against unwanted additional feedback with unfavorable phase have also been determined.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.272-273
• /
• 2001

Normalized gain difference for index-coupled and quarter wavelength shifted DFB lasers for various facet reflectivities are calculated as a function of facet phases.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.192-193
• /
• 2001

No Abstract.See Full-text

• 한국광학회지
• /
• 제15권2호
• /
• pp.149-157
• /
• 2004

문턱 전류 이상에서 complex-coupled(CC) DFB 레이저의 여러 가지 ｜$\chi$L｜과 양 단면 반사율 조합에 대하여 파워 추출 효율과 발진 파장 분포를 구하였고 문턱 전류에서의 결과와 비교하였다. 또한 결함 계수 비(CR)와 Ar 단면의 반사율이 파워 추출 효율과 발진 파장 분포에 미치는 영향에 대하여 살펴보았다. 문턱 전류에서 in-phase(IP) CC DFB 레이저와 anti-phase(AP) CC DFB 레이저의 파워 추출 효율에 대하여 도시한 단일 모드 수율은 정확히 일치하였다. 그러나 문턱 전류 이상에서는 IP CC DFB 레이저의 파워 추출에 대하여 도시한 단일 모드 수율은 AP CC DFB 레이저보다 크게 나타났다. IP CC DFB 레이저의 경우 양 단면 반사율 조합이 AR-HR의 경우가 다른 반사율 조합에 비해 단일 모드 수율이 크고 또한 파워 추출 효율이 큼을 알 수 있었다. 본 논문에서 고려한 경우 중에서 ｜$\chi$L｜이 0.8이고 AR-HR인 경우가 문턱 전류 이상에서 단일 모드 수율과 파워 추출 효율이 가장 컸다. 양 단면 반사율 조합이 AR-HR인 경우 CR이 커질수록, AR단면의 반사율이 작아질수록 spatial hole burning 현상이 완화되어 단일 모드 수율과 파워 추출 효율이 커졌다. 양 단면 반사율 조합이 AR-HR인 경우 CC DFB 레이저의 발진 파장은 DFB 금지 대역 내에 넓게 분포하였다. CR이 증가할수록 IP CC DFB 레이저는 장파장 모드에, AP CC DFB 레이저는 단파장 모드에 발진 파장 분포가 증가하였다. ｜$\chi$L｜이 커질수록 발진 파장이 존재하는 파장 폭이 작아 지고 발진 파장 분포가 장파장 쪽으로 이동하였다.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 1998년도 추계학술발표대회 초록개요집
• /
• pp.0-0
• /
• 1998

-Part I- As market needs become more various, the production of smaller quantities of a wider variety of products becomes increasingly important. In addition, in order to meet demands for more efficient production, long-term unmanned factory operation is prevailing at a remarkable pace. Within this context, laser machines are gaining increasing popularity for use in applications such as cutting and welding metallic and ceramic materials. FANUC supplies four models of $CO_2$ laser oscillators with laser power ranging from 1.5㎾ to 6㎾ on an OEM basis to machine tool builders. However, FANUC has been requested to produce laser oscillators that allow more compact and lower-cost laser machines to be built. To meet such demands, FANUC has developed six models of Slab type YAG laser oscillators with output power ranging from 150W to 2㎾. These oscillators are designed mainly fur cutting and welding sheet metals. The oscillator has an exceptionally superior laser beam quality compared to conventional YAG laser oscillators, thus providing significantly improved machining capability. In addition, the laser beam of the oscillator can be efficiently transmitted through quartz optical fibers, enabling laser machines to be simplified and made more compact. This paper introduces the features of FANUC’s developed Slab type YAG laser oscillators and their applications. - Part II - All-solid-state lasers employing laser diodes (LD) as a source of pumping solid-state laser feature high efficiency, compactness, and high reliability. Thus, they are expected to provide a new generation of processing tools in various fields, especially in automobile and aircraft industries where great hopes are being placed on laser welding technology for steel plates and aluminum materials for which a significant growth in demand is expected. Also, in power plants, it is hoped that reliability and safety will be improved by using the laser welding technology. As in the above, the advent of high-power all-solid-state lasers may not only bring a great technological innovation to existing industry, but also create new industry. This is the background for this project, which has set its sights on the development of high-power, all-solid-state lasers with an average output of over 10㎾, an oscillation efficiency of over 20%, and a laser head volume of below 0.05㎥. FANUC Ltd. is responsible for the research and development of slab type lasers, and TOSHIBA Corp. far rod type lasers. By pumping slab type Nd: YAG crystal and by using quasi-continuous wave (QCW) type LD stacks, FANUC has already obtained an average output power of 1.7㎾, an optical conversion efficiency of 42%, and an electro-optical conversion efficiency of 16%. These conversion efficiencies are the best results the world has ever seen in the field of high-power all-solid-state lasers. TOSHIBA Corp. has also obtained an output power of 1.2㎾, an optical conversion efficiency of 30％, and an electro-optical conversion efficiency of 12%, by pumping the rod type Nd: YAG crystal by continuous wave (CW) type LD stacks. The laser power achieved by TOSHIBA Corp. is also a new world record in the field of rod type all-solid-state lasers. This report provides details of the above results and some information on future development plans.

• 제어로봇시스템학회논문지
• /
• 제11권6호
• /
• pp.496-501
• /
• 2005

This paper presents experimental results of the frequency offset locking of He-Ne lasers and the stability analysis. The master laser is free running, and the slave laser is a single-mode operating laser. The frequency difference of two lasers is stabilized to 200 MHz which can be synchronized using PLL servo. The measured beat frequency between two lasers was 200.004 MHz ${\pm}$ 0.15 MHz. The square root of Allan variance as a measure of stability in time domain is also measured. The long-term stability of the beat was worse than sort-term stability. With a gate time $\tau=1000\;s$, the square root of Allan variance was about 1 GHz. The results of the square root of Allan variance of the stabilized beat signal was a gate time of $\tau=1000\;s$, the square root of Allan variance was about 1.5 kHz. The long-term stability was improved by more than several hundred times compared with that without the stabilization.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.46-52
• /
• 2008

The restrictor, which is a fluid channel from a reservoir to a chamber inside a thermal micro actuator, has been fabricated using ArF and KrF excimer lasers, Diode-Pumped Solid State Lasers (DPSSL) and femtosecond lasers for a feasibility study. A numerical model of fluid dynamics for the actuator chamber and restrictor is presented. The model includes bubble formation and growth, droplet ejection through nozzle, and dynamics of fluid refill through the restrictor from a reservoir. Since an optimized and well-fabricated restrictor is important for a high frequency actuator, some special beam delivery setups and post processing techniques have been researched and developed. The effects of variations of the restrictor length, diameter, and tapered shapes are simulated and the results are analyzed to determine the optimal design. The numerical results of droplet velocity and volume are compared with the experimental results of a cylindrical-shaped actuator. It is found that the micro actuators having tapered restrictors show better high frequency characteristics than those having a cylindrical shape without any notable decrease of droplet volume. The laser-fabricated restrictors demonstrate initial feasibility for the laser direct ablation technique although more development is required.

• 대한한방소아과학회지
• /
• 제15권2호
• /
• pp.195-199
• /
• 2001

Cavernous hemangiomas, one of common hemangiomas, are collections of dilated vessels deep in the dermis and subcutaneous tissue that are present at birth. Clinically they appear as pale, skin-colored, red, or blue masses that are ill defined and rounded. Like strawberry hemangiomas, the lesions enlarge for several months, become stationary for an indefinite period, and undergo spontaneous resolution. Usually, they are managed like strawberry hemangiomas, for example, compression, take corticosteroids or interferon and use lasers(pulsed dye lasers and argon lasers). It is similar to 血瘤 and 紅絲瘤 in Oriental Medicine. We observed and treated a 8 month old male infant who had been diagnosed with cavernous hemangiomas on near medial side of the right transverse cubital crease. He had been treated by lasers three times each month about 2 months after the on set of disease in another College of Medicine Hospital. However, his sign didn't any change. He first visited our clinic about 7 months after the on set of disease. bout 1 year after our treatment, herb-medication and acupuncture treatment, the volume of hemangiomas was decreased remarkably and the colour was lighter. It was tender to the touch more and more. It is very rate that someone has cavernous hemangiomas and visits Oriental Medicine Hospital. Also we don't have much the treatment experience of this disease. I expect this case will be one of the base of treatment and management on this kind of diseases.