• Computers and Concrete
• /
• 제18권3호
• /
• pp.405-420
• /
• 2016

Recently laser scanning technologies become widely used in many areas of the modern economy. In the following paper authors show a potential spectrum of use Terrestrial Laser Scanning (TLS) in diagnostics of reinforced concrete elements. Based on modes of failure analysis of reinforcement concrete beam authors describe downsides and advantages of adaptation of terrestrial laser scanning to this purpose, moreover reveal under which condition this technology might be used. Research studies were conducted by Faculty of Civil and Environmental Engineering at Gdansk University of Technology. An experiment involved bending of reinforced concrete beam, the process was registered by the terrestrial laser scanner. Reinforced concrete beam was deliberately overloaded and eventually failed by shear. Whole failure process was tracing and recording by scanner Leica ScanStation C10 and verified by synchronous photographic registration supported by digital photogrammetry methods. Obtained data were post-processed in Leica Cyclone (dedicated software) and MeshLab (program on GPL license). The main goal of this paper is to prove the effectiveness of TLS in diagnostics of reinforced concrete elements. Authors propose few methods and procedures to virtually reconstruct failure process, measure geometry and assess a condition of structure.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.121-126
• /
• 2002

이 논문은 항만에서 사용되는 크레인에 있어서 ALS(Automatic Landing System)를 위한 스프레더(spreader)의 이동정보 및 스큐각을 얻을 수 있는 방법을 소개 하고자 한다. 현재 사용되고 있는 ALS에서의 이동정보 획득방법은 3차원 laser scanner 일종인 모서리 감지기를 이용하거나, 다수의 레이저 거리미터기를 이용하는 방법이 주를 이루고 있다. 그러나 이러한 방법들은 경제성 면에서 그리고 성능면에서 각각 단점을 가진다 따라서 본 논문에서는 이러한 단점들을 개선하기 위해서 CCD 카메라를 이용한 영상처리와 레이저 거리 미터기를 이용하여 스프레더의 이동정도와 스큐각을 획득할 수 있는 방법을 제안한다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.16-21
• /
• 2008

The demand for three-dimensional (3D) shape measurements is increasing in a variety of fields, including the manufacture of molds and dies. The most popular technology for 3D shape measurement is the coordinate measuring machine (CMM) with a contact trigger probe. Although a CMM provides a high degree of accuracy, it is inefficient due to its long measuring time. It also has difficulty measuring soft objects that can be deformed by the touch of the contact probe. In addition, a CMM cannot digitize areas that are difficult to reach, and cannot capture very minute details on the surface of complex parts. For these reasons, optical non-contact measurement techniques are receiving more attention since they eliminate most of the problems associated with contact methods. Laser scanning is emerging as one of the more promising non-contact measurement techniques. This paper describes various acquisition considerations for laser scanning, including the accuracy of the 3D scan data, which depends on the charge-coupled device (CCD) gain and noise. The CCD gain and noise of a 3D laser scanner are varied while keeping the other conditions constant, and the measurement results are compared to the dimensions of a standard model. The experimental results show that a considerable time savings and an optimum degree of accuracy are possible by selecting the proper CCD gain and noise.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.854-855
• /
• 2015

Electric machines for office automation device such as printer and scanner have been required the low noise and vibration performance. Many researches about the low noise and vibration of polygon mirror scanner motor have been also progressed. The noise and vibration of polygon mirror scanner motor can be classified by aerodynamic, structural and electromagnetic. Electromagnetic noise and vibration can be occurred by high cogging torque and nonsinusoidal back EMF. To improve the cogging torque and back EMF characteristic, we apply unequal air-gap. To analyse characteristic of a polygon mirror scanner motor, two dimensional finite element method is used. To minimize the cogging torque of a polygon mirror motor, Kriging based on latin hypercube sampling (LHS) is utilized. As a result, the cogging torque and torque ripple improved while maintaining the back EMF and average torque.

• 한국건설관리학회논문집
• /
• 제10권1호
• /
• pp.136-145
• /
• 2009

'지능형 굴삭시스템 개발'은 센서기술, 로봇기술들을 융합하여 토공 작업환경을 인식하고 작업 계획을 수립하며 굴삭기를 자동 조정하여 토공작업을 자동화 하는 것을 목표로 한다. 본 연구는 지능형 굴삭시스템 개발을 위한 요소기술로서, 광대역 3D 레이저 스캐너를 이용하여 실제 토공 작업환경을 가상의 3차원 공간으로 재현할 수 있는 수학적 모델을 만드는 것이다. 이 연구에서는 광대역 3D 레이저 스캐너를 구동하기 위한 사용자 소프트웨어 및 사용자 인터페이스를 개발하였으며, 3D 레이저 스캐너의 차량 탑재 및 스캐닝 작업의 최적화를 위하여 모바일 3D 이미징 시스템을 개발하였다. 또한 실제 토공 작업환경을 대상으로 스캐닝 실험을 실시하여 스캔 데이터를 획득하였고, 이를 기반으로 각 스캔 데이터들 간의 자동 정합 알고리즘을 설계하였다. 본 연구에서 개발된 시스템은 향후 지능형 굴삭 로봇의 완전 자동화 시스템의 구현을 위하여 널리 활용될 수 있을 것으로 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2170-2174
• /
• 2005

Selective Laser Sintering (SLS) is a useful rapid prototyping technique for the manufacture of three dimensional (3D) solid objects directly from a scanning data. A new approach called a Selective Multi-Laser Sintering (SMLS) system has been developed at Korea Institute Machinery & Materials (KIMM) as an industrial type SFFS. This SMLS machine is built with a frame, heaters, nitrogen supply part, laser system. This system uses the dual laser and 3D scanner made in $Solutionix^{TM}$ to improve the precision and speed for large objects. The three-dimensional solid objects are made of polyamide powder. The investigation on each part of SMLS system is performed to determine the proper theirs design and the effect of experimental parameters on making the 3D objects. The temperature of the system has a great influence on sintering the polymer. Because the stability of the powder temperature prevents the deformation of each layer, the controls of the temperature in both the system and the powders are very important during the process. Therefore, we simulated the temperature distribution of build room using the temperature analysis with ANSYS program. Selected radiant heater is used to raise temperature of powder to melting point temperature. The laser parameters such as scan spacing, scan speed, laser power and laser delay time affect the production the 3D objects too. The combination of the slow scan speed and the high laser power shows the good results without the layer curling. The work is under way to evaluate the effect of experimental parameters on process and to produce the various objects. We are going to experiment continuously to improve the size accuracy and surface roughness.

• 방송과미디어
• /
• 제6권2호
• /
• pp.84-101
• /
• 2001

In this paper, we present a primitive system design of a super multi-view(SMV) 3-D display system based on a focused light array(FLA) concept using reflective vibrating scanner array(ViSA). The parallel beam scanning using a vibrating scanner array is performed by moving left and right an array of curvature-compensated mirrors or diamond-ruled reflective grating attached to a vibrating membrane. The parallel laser beam scanner array can replace the polygon mirror scanner which has been used in the SMV 3-D display system based on the focused light array(FLA) concept proposed by Kajiki at TAO(Telecommunications) Advancement Organization). The proposed system has great advantages in the sense that it requires neither huge imaging optics nor mechanical scanning pals. Some mathematical analyses and fundamental limitations of the proposed system are presented. The proposed vibrating scanner array, after some modifications and refinements, may replace polygon mirror-based scanners in the near future.

• 전산구조공학
• /
• 제16권3호
• /
• pp.51-57
• /
• 2003

• 기계와재료
• /
• 제9권1호통권31호
• /
• pp.58-65
• /
• 1997

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.261-262
• /
• 2013